On Tue, 17 Sep 2013, Laxman Dewangan wrote:
> The AMS AS3722 is a compact system PMU suitable for mobile phones,
> tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
> controller, 11 LDOs, RTC, automatic battery, temperature and
> over-current monitoring, 8 GPIOs, ADC and wathdog.
>
> Add mfd core driver for the AS3722 to support core functionality.
>
> Signed-off-by: Laxman Dewangan <ldewan...@nvidia.com>
> Signed-off-by: Florian Lobmaier <florian.lobma...@ams.com>
> ---
> Documentation/devicetree/bindings/mfd/as3722.txt | 69 ++++
> drivers/mfd/Kconfig | 12 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/as3722.c | 463
> ++++++++++++++++++++++
> include/linux/mfd/as3722.h | 425 ++++++++++++++++++++
> 5 files changed, 970 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/as3722.txt
> create mode 100644 drivers/mfd/as3722.c
> create mode 100644 include/linux/mfd/as3722.h
>
> diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt
> b/Documentation/devicetree/bindings/mfd/as3722.txt
> new file mode 100644
> index 0000000..d6bfd00
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/as3722.txt
> @@ -0,0 +1,69 @@
> +* AMS AS3722 device tree bindings
We know they're DT bindings, that's why they're here. How about
swapping that out for the type of device we're supplying them for?
> +Required properties:
> +-------------------
> +- compatible : Must be "ams,as3722".
- reg: <blah>
> +- interrupt-controller : AS3722 has its own internal IRQs
> +- #interrupt-cells : should be set to 2 for IRQ number and flags
> + The first cell is the IRQ number.
> + The second cell is the flags, encoded as the trigger masks from
> + Documentation/devicetree/bindings/interrupts.txt
... using the #defines found in dt-bindings/irq.
> +- interrupt-parent : The parent interrupt controller.
> +
> +Optional properties:
> +-------------------
> +- gpio-controller: Marks the device node as a GPIO controller.
> +- #gpio-cells: Number of GPIO cells. Should be two.
> + - first cell is the gpio pin number.
> + - second cell is used to specify the gpio polarity:
> + 0 = active high
> + 1 = active low
Use the #includes in dt-bindings/gpio instead.
> +Note: This gpio properties will be in the as3722 node.
> +
> +Sub-node compatible:
> +-------------------
> +The of_node of its all child node will have compatible so that it can
> +get the child node handle and pass as the dev->of_node when registering
> +mfd devices.
> +MFD driver adds following mfd devices with their compatible values:
> +as3722-gpio: The compatible value of this as3722 gpio driver is
Consider using uppercase device types: s/gpio/GPIO etc.
> + "ams,as3722-gpio";
> +as3722-regulator: The compatible value of this as3722 regulator driver is
> + "ams,as3722-regulator";
> +as3722-rtc: The compatible value of this as3722 rtc driver is
> + "ams,as3722-rtc";
> +as3722-adc: The compatible value of this as3722 adc driver is
> + "ams,as3722-adc";
> +as3722-power-off: he compatible value of this as3722 power off driver is
s/he/The
> + "ams,as3722-power-off".
I don't think there's any need to repleat these values. Just do:
ams,as3722-power-off: The compatible value of this as3722 power off driver.
> +Example:
> +--------
> +ams3722 {
> + compatible = "ams,as3722";
> + reg = <0x48>
> +
> + interrupt-parent = <&intc>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio {
> + compatible = "ams,as3722-gpio";
> + ...
> + };
> +
> + rtc {
> + compatible = "ams,as3722-rtc";
> + ...
> + };
> +
> + regulators {
> + compatible = "ams,as3722-regulator";
> + ...
> + };
> + ...
> +};
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index e0e46f5..251d451 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -27,6 +27,18 @@ config MFD_AS3711
> help
> Support for the AS3711 PMIC from AMS
>
> +config MFD_AS3722
> + bool "AMS AS3722 Power Management IC"
> + select MFD_CORE
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + depends on I2C=y && OF
Do you need the "=y" here?
> + help
> + The AMS AS3722 is a compact system PMU suitable for mobile phones,
> + tablet etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
> + controller, 11 LDOs, RTC, automatic battery, temperature and
> + over current monitoring, GPIOs, ADC, watchdog.
> +
> config PMIC_ADP5520
> bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
> depends on I2C=y
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 15b905c..d8c2ba1 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -162,3 +162,4 @@ obj-$(CONFIG_MFD_LM3533) += lm3533-core.o
> lm3533-ctrlbank.o
> obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o
> obj-$(CONFIG_MFD_RETU) += retu-mfd.o
> obj-$(CONFIG_MFD_AS3711) += as3711.o
> +obj-$(CONFIG_MFD_AS3722) += as3722.o
> diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c
> new file mode 100644
> index 0000000..4f6c5c6
> --- /dev/null
> +++ b/drivers/mfd/as3722.c
> @@ -0,0 +1,463 @@
> +/*
> + * Core driver for AMS AS3722 PMICs
> + *
> + * Copyright (C) 2013 ams AG
> + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
> + *
> + * Author: Florian Lobmaier <florian.lobma...@ams.com>
> + * Author: Laxman Dewangan <ldewan...@nvidia.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + */
> +
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/as3722.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
Are we inherently including linux/of.h here, or is it genuinely not
required?
> +#define AS3722_DEVICE_ID 0x0C
> +
> +static const struct resource as3722_rtc_resource[] = {
> + {
> + .name = "as3722-rtc-alarm",
> + .start = AS3722_IRQ_RTC_ALARM,
> + .end = AS3722_IRQ_RTC_ALARM,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static const struct resource as3722_adc_resource[] = {
> + {
> + .name = "as3722-adc",
> + .start = AS3722_IRQ_ADC,
> + .end = AS3722_IRQ_ADC,
> + .flags = IORESOURCE_IRQ,
> + },
> +};
> +
> +static struct mfd_cell as3722_devs[] = {
> + {
> + .name = "as3722-gpio",
> + .of_compatible = "ams,as3722-gpio",
> + },
> + {
> + .name = "as3722-regulator",
> + .of_compatible = "ams,as3722-regulator",
> + },
> + {
> + .name = "as3722-rtc",
> + .of_compatible = "ams,as3722-rtc",
> + .num_resources = ARRAY_SIZE(as3722_rtc_resource),
> + .resources = as3722_rtc_resource,
> + },
> + {
> + .name = "as3722-adc",
> + .of_compatible = "ams,as3722-adc",
> + .num_resources = ARRAY_SIZE(as3722_adc_resource),
> + .resources = as3722_adc_resource,
> + },
> + {
> + .name = "as3722-power-off",
> + .of_compatible = "ams,as3722-power-off",
> + },
> +};
> +
> +static const struct regmap_irq as3722_irqs[] = {
> + /* INT1 IRQs */
> + [AS3722_IRQ_LID] = {
> + .mask = AS3722_INTERRUPT_MASK1_LID,
> + },
> + [AS3722_IRQ_ACOK] = {
> + .mask = AS3722_INTERRUPT_MASK1_ACOK,
> + },
> + [AS3722_IRQ_ENABLE1] = {
> + .mask = AS3722_INTERRUPT_MASK1_ENABLE1,
> + },
> + [AS3722_IRQ_OCCUR_ALARM_SD0] = {
> + .mask = AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0,
> + },
> + [AS3722_IRQ_ONKEY_LONG_PRESS] = {
> + .mask = AS3722_INTERRUPT_MASK1_ONKEY_LONG,
> + },
> + [AS3722_IRQ_ONKEY] = {
> + .mask = AS3722_INTERRUPT_MASK1_ONKEY,
> + },
> + [AS3722_IRQ_OVTMP] = {
> + .mask = AS3722_INTERRUPT_MASK1_OVTMP,
> + },
> + [AS3722_IRQ_LOWBAT] = {
> + .mask = AS3722_INTERRUPT_MASK1_LOWBAT,
> + },
> +
> + /* INT2 IRQs */
> + [AS3722_IRQ_SD0_LV] = {
> + .mask = AS3722_INTERRUPT_MASK2_SD0_LV,
> + .reg_offset = 1,
> + },
> + [AS3722_IRQ_SD1_LV] = {
> + .mask = AS3722_INTERRUPT_MASK2_SD1_LV,
> + .reg_offset = 1,
> + },
> + [AS3722_IRQ_SD2_LV] = {
> + .mask = AS3722_INTERRUPT_MASK2_SD2345_LV,
> + .reg_offset = 1,
> + },
> + [AS3722_IRQ_PWM1_OV_PROT] = {
> + .mask = AS3722_INTERRUPT_MASK2_PWM1_OV_PROT,
> + .reg_offset = 1,
> + },
> + [AS3722_IRQ_PWM2_OV_PROT] = {
> + .mask = AS3722_INTERRUPT_MASK2_PWM2_OV_PROT,
> + .reg_offset = 1,
> + },
> + [AS3722_IRQ_ENABLE2] = {
> + .mask = AS3722_INTERRUPT_MASK2_ENABLE2,
> + .reg_offset = 1,
> + },
> + [AS3722_IRQ_SD6_LV] = {
> + .mask = AS3722_INTERRUPT_MASK2_SD6_LV,
> + .reg_offset = 1,
> + },
> + [AS3722_IRQ_RTC_REP] = {
> + .mask = AS3722_INTERRUPT_MASK2_RTC_REP,
> + .reg_offset = 1,
> + },
> +
> + /* INT3 IRQs */
> + [AS3722_IRQ_RTC_ALARM] = {
> + .mask = AS3722_INTERRUPT_MASK3_RTC_ALARM,
> + .reg_offset = 2,
> + },
> + [AS3722_IRQ_GPIO1] = {
> + .mask = AS3722_INTERRUPT_MASK3_GPIO1,
> + .reg_offset = 2,
> + },
> + [AS3722_IRQ_GPIO2] = {
> + .mask = AS3722_INTERRUPT_MASK3_GPIO2,
> + .reg_offset = 2,
> + },
> + [AS3722_IRQ_GPIO3] = {
> + .mask = AS3722_INTERRUPT_MASK3_GPIO3,
> + .reg_offset = 2,
> + },
> + [AS3722_IRQ_GPIO4] = {
> + .mask = AS3722_INTERRUPT_MASK3_GPIO4,
> + .reg_offset = 2,
> + },
> + [AS3722_IRQ_GPIO5] = {
> + .mask = AS3722_INTERRUPT_MASK3_GPIO5,
> + .reg_offset = 2,
> + },
> + [AS3722_IRQ_WATCHDOG] = {
> + .mask = AS3722_INTERRUPT_MASK3_WATCHDOG,
> + .reg_offset = 2,
> + },
> + [AS3722_IRQ_ENABLE3] = {
> + .mask = AS3722_INTERRUPT_MASK3_ENABLE3,
> + .reg_offset = 2,
> + },
> +
> + /* INT4 IRQs */
> + [AS3722_IRQ_TEMP_SD0_SHUTDOWN] = {
> + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN,
> + .reg_offset = 3,
> + },
> + [AS3722_IRQ_TEMP_SD1_SHUTDOWN] = {
> + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN,
> + .reg_offset = 3,
> + },
> + [AS3722_IRQ_TEMP_SD2_SHUTDOWN] = {
> + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN,
> + .reg_offset = 3,
> + },
> + [AS3722_IRQ_TEMP_SD0_ALARM] = {
> + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM,
> + .reg_offset = 3,
> + },
> + [AS3722_IRQ_TEMP_SD1_ALARM] = {
> + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM,
> + .reg_offset = 3,
> + },
> + [AS3722_IRQ_TEMP_SD6_ALARM] = {
> + .mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM,
> + .reg_offset = 3,
> + },
> + [AS3722_IRQ_OCCUR_ALARM_SD6] = {
> + .mask = AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6,
> + .reg_offset = 3,
> + },
> + [AS3722_IRQ_ADC] = {
> + .mask = AS3722_INTERRUPT_MASK4_ADC,
> + .reg_offset = 3,
> + },
> +};
> +
> +static const struct regmap_irq_chip as3722_irq_chip = {
> + .name = "as3722",
> + .irqs = as3722_irqs,
> + .num_irqs = ARRAY_SIZE(as3722_irqs),
> + .num_regs = 4,
> + .status_base = AS3722_INTERRUPT_STATUS1_REG,
> + .mask_base = AS3722_INTERRUPT_MASK1_REG,
> +};
> +
> +static int as3722_check_device_id(struct as3722 *as3722)
> +{
> + u32 val;
> + int ret;
> +
> + /* Check that this is actually a AS3722 */
> + ret = as3722_read(as3722, AS3722_ASIC_ID1_REG, &val);
> + if (ret < 0) {
> + dev_err(as3722->dev, "ASIC_ID1 read failed: %d\n", ret);
> + return ret;
> + }
> +
> + if (val != AS3722_DEVICE_ID) {
> + dev_err(as3722->dev, "Device is not AS3722, ID is 0x%x\n", val);
> + return -ENOTSUPP;
Not an expert, but I think this is the wrong error to use.
I would consider using something like -ENODEV instead.
> + }
> +
> + ret = as3722_read(as3722, AS3722_ASIC_ID2_REG, &val);
> + if (ret < 0) {
> + dev_err(as3722->dev, "ASIC_ID2 read failed: %d\n", ret);
> + return ret;
> + }
> +
> + dev_info(as3722->dev, "AS3722 with revision 0x%x found\n", val);
> + return 0;
> +}
> +
> +static int as3722_configure_pullups(struct as3722 *as3722)
> +{
> + int ret;
> + u32 val = 0;
> +
> + if (as3722->enable_internal_int_pullup)
> + val |= AS3722_INT_PULL_UP;
> + if (as3722->enable_internal_i2c_pullup)
> + val |= AS3722_I2C_PULL_UP;
> +
> + ret = as3722_update_bits(as3722, AS3722_IOVOLTAGE_REG,
> + AS3722_INT_PULL_UP | AS3722_I2C_PULL_UP, val);
> + if (ret < 0)
> + dev_err(as3722->dev, "IOVOLTAGE_REG update failed: %d\n", ret);
> + return ret;
> +}
> +
> +#define reg_range(min, max) {.range_min = min, .range_max = max,}
I was a little confused that it didn't finish with a ',' or ';', but I
now see it in the struct below.
Can you put a new line separator here please?
> +static const struct regmap_range as3722_readable_ranges[] = {
> + reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
> + reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
> + reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_REG_SEQU_MOD3_REG),
> + reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
> + reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
> + reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
> + AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
> + reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
> + reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
> + reg_range(AS3722_RTC_ACCESS_REG, AS3722_RTC_ACCESS_REG),
> + reg_range(AS3722_RTC_STATUS_REG, AS3722_TEMP_STATUS_REG),
> + reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG),
> + reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG),
> + reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
> +};
> +
> +static const struct regmap_access_table as3722_readable_table = {
> + .yes_ranges = as3722_readable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(as3722_readable_ranges),
> +};
> +
> +static const struct regmap_range as3722_writable_ranges[] = {
> + reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
> + reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
> + reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_GPIO_SIGNAL_OUT_REG),
> + reg_range(AS3722_REG_SEQU_MOD1_REG, AS3722_REG_SEQU_MOD3_REG),
> + reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
> + reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
> + reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
> + AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
> + reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
> + reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
> + reg_range(AS3722_INTERRUPT_MASK1_REG, AS3722_TEMP_STATUS_REG),
> + reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC1_CONTROL_REG),
> + reg_range(AS3722_ADC1_THRESHOLD_HI_MSB_REG,
> + AS3722_ADC_CONFIGURATION_REG),
> + reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
> +};
> +
> +static const struct regmap_access_table as3722_writable_table = {
> + .yes_ranges = as3722_writable_ranges,
> + .n_yes_ranges = ARRAY_SIZE(as3722_writable_ranges),
> +};
> +
> +static const struct regmap_range as3722_voltaile_ranges[] = {
> + reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_LDO11_VOLTAGE_REG),
> + reg_range(AS3722_SD_CONTROL_REG, AS3722_LDOCONTROL1_REG),
> +};
> +
> +static const struct regmap_access_table as3722_volatile_table = {
> + .no_ranges = as3722_voltaile_ranges,
> + .n_no_ranges = ARRAY_SIZE(as3722_voltaile_ranges),
> +};
> +
> +const struct regmap_config as3722_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = AS3722_MAX_REGISTER,
> + .cache_type = REGCACHE_RBTREE,
> + .rd_table = &as3722_readable_table,
> + .wr_table = &as3722_writable_table,
> + .volatile_table = &as3722_volatile_table,
> +};
> +
> +static int as3722_get_core_dt_data(struct i2c_client *i2c,
> + struct as3722 *as3722)
> +{
> + struct device_node *np = i2c->dev.of_node;
> + struct irq_data *irq_data;
> +
> + if (!np) {
> + dev_err(&i2c->dev, "Device does not have of_node\n");
> + return -ENODEV;
I usually use -EINVAL for lack of pdata or np.
Perhaps this is suitable too.
Second opinion please?
> + }
> +
> + irq_data = irq_get_irq_data(i2c->irq);
> + if (!irq_data) {
> + dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
> + return -EINVAL;
> + }
> +
> + as3722->enable_internal_int_pullup = of_property_read_bool(np,
> + "ams,enable-internal-int-pullup");
> + as3722->enable_internal_i2c_pullup = of_property_read_bool(np,
> + "ams,enable-internal-i2c-pullup");
> + as3722->irq_flags = irqd_get_trigger_type(irq_data);
> + dev_dbg(&i2c->dev, "Irq flag is 0x%08lx\n", as3722->irq_flags);
> + return 0;
> +}
> +
> +static int as3722_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct as3722 *as3722;
> + unsigned long irq_flags;
> + int ret;
> +
> + as3722 = devm_kzalloc(&i2c->dev, sizeof(struct as3722), GFP_KERNEL);
> + if (!as3722)
> + return -ENOMEM;
> +
> + as3722->dev = &i2c->dev;
> + as3722->chip_irq = i2c->irq;
> + i2c_set_clientdata(i2c, as3722);
> +
> + ret = as3722_get_core_dt_data(i2c, as3722);
How about "as3722_i2c_of_probe()" instead?
> + if (ret < 0)
> + return ret;
> +
> + as3722->regmap = devm_regmap_init_i2c(i2c, &as3722_regmap_config);
> + if (IS_ERR(as3722->regmap)) {
> + ret = PTR_ERR(as3722->regmap);
> + dev_err(&i2c->dev, "regmap_init failed with err: %d\n", ret);
> + return ret;
> + }
> +
> + ret = as3722_check_device_id(as3722);
> + if (ret < 0)
> + return ret;
> +
> + irq_flags = as3722->irq_flags | IRQF_ONESHOT;
> + ret = regmap_add_irq_chip(as3722->regmap, as3722->chip_irq,
> + irq_flags, -1, &as3722_irq_chip,
> + &as3722->irq_data);
> + if (ret < 0) {
> + dev_err(as3722->dev, "regmap_add_irq failed: %d\n", ret);
> + return ret;
> + }
> +
> + ret = as3722_configure_pullups(as3722);
> + if (ret < 0)
> + goto scrub;
> +
> + ret = mfd_add_devices(&i2c->dev, -1, as3722_devs,
> + ARRAY_SIZE(as3722_devs), NULL, 0,
> + regmap_irq_get_domain(as3722->irq_data));
> + if (ret) {
> + dev_err(as3722->dev, "mfd_add_devices() failed: %d\n", ret);
> + goto scrub;
> + }
> +
> + dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n");
> + return 0;
> +scrub:
> + regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data);
> + return ret;
> +}
> +
> +static int as3722_i2c_remove(struct i2c_client *i2c)
> +{
> + struct as3722 *as3722 = i2c_get_clientdata(i2c);
> +
> + mfd_remove_devices(as3722->dev);
> + regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data);
> + return 0;
> +}
> +
> +static const struct of_device_id as3722_of_match[] = {
> + { .compatible = "ams,as3722", },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, as3722_of_match);
> +
> +static const struct i2c_device_id as3722_i2c_id[] = {
> + {"as3722", 0},
Most likely a personal preference and certainly a nit, but I prefer:
{ "as3722", 0 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, as3722_i2c_id);
> +
> +static struct i2c_driver as3722_i2c_driver = {
> + .driver = {
> + .name = "as3722",
> + .owner = THIS_MODULE,
> + .of_match_table = as3722_of_match,
> + },
> + .probe = as3722_i2c_probe,
> + .remove = as3722_i2c_remove,
> + .id_table = as3722_i2c_id,
> +};
<----- From here ----->
> +static int __init as3722_i2c_init(void)
> +{
> + return i2c_add_driver(&as3722_i2c_driver);
> +}
> +subsys_initcall(as3722_i2c_init);
> +
> +static void __exit as3722_i2c_exit(void)
> +{
> + i2c_del_driver(&as3722_i2c_driver);
> +}
> +module_exit(as3722_i2c_exit);
Boiler plate. Replace with module_i2c_driver(as3722_i2c_driver)
> +MODULE_DESCRIPTION("I2C support for AS3722 PMICs");
> +MODULE_AUTHOR("Florian Lobmaier <florian.lobma...@ams.com>");
> +MODULE_AUTHOR("Laxman Dewangan <ldewan...@nvidia.com>");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/as3722.h b/include/linux/mfd/as3722.h
> new file mode 100644
> index 0000000..ba99567
> --- /dev/null
> +++ b/include/linux/mfd/as3722.h
> @@ -0,0 +1,425 @@
> +/*
> + * as3722 definitions
> + *
> + * Copyright (C) 2013 ams
> + * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
> + *
> + * Author: Florian Lobmaier <florian.lobma...@ams.com>
> + * Author: Laxman Dewangan <ldewan...@nvidia.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __LINUX_MFD_AS3722_H__
> +#define __LINUX_MFD_AS3722_H__
> +
> +#include <linux/regmap.h>
> +
> +/* AS3722 registers */
> +#define AS3722_SD0_VOLTAGE_REG 0x00
> +#define AS3722_SD1_VOLTAGE_REG 0x01
> +#define AS3722_SD2_VOLTAGE_REG 0x02
> +#define AS3722_SD3_VOLTAGE_REG 0x03
> +#define AS3722_SD4_VOLTAGE_REG 0x04
> +#define AS3722_SD5_VOLTAGE_REG 0x05
> +#define AS3722_SD6_VOLTAGE_REG 0x06
> +#define AS3722_GPIO0_CONTROL_REG 0x08
> +#define AS3722_GPIO1_CONTROL_REG 0x09
> +#define AS3722_GPIO2_CONTROL_REG 0x0A
> +#define AS3722_GPIO3_CONTROL_REG 0x0B
> +#define AS3722_GPIO4_CONTROL_REG 0x0C
> +#define AS3722_GPIO5_CONTROL_REG 0x0D
> +#define AS3722_GPIO6_CONTROL_REG 0x0E
> +#define AS3722_GPIO7_CONTROL_REG 0x0F
> +#define AS3722_LDO0_VOLTAGE_REG 0x10
> +#define AS3722_LDO1_VOLTAGE_REG 0x11
> +#define AS3722_LDO2_VOLTAGE_REG 0x12
> +#define AS3722_LDO3_VOLTAGE_REG 0x13
> +#define AS3722_LDO4_VOLTAGE_REG 0x14
> +#define AS3722_LDO5_VOLTAGE_REG 0x15
> +#define AS3722_LDO6_VOLTAGE_REG 0x16
> +#define AS3722_LDO7_VOLTAGE_REG 0x17
> +#define AS3722_LDO9_VOLTAGE_REG 0x19
> +#define AS3722_LDO10_VOLTAGE_REG 0x1A
> +#define AS3722_LDO11_VOLTAGE_REG 0x1B
> +#define AS3722_GPIO_DEB1_REG 0x1E
> +#define AS3722_GPIO_DEB2_REG 0x1F
> +#define AS3722_GPIO_SIGNAL_OUT_REG 0x20
> +#define AS3722_GPIO_SIGNAL_IN_REG 0x21
> +#define AS3722_REG_SEQU_MOD1_REG 0x22
> +#define AS3722_REG_SEQU_MOD2_REG 0x23
> +#define AS3722_REG_SEQU_MOD3_REG 0x24
> +#define AS3722_SD_PHSW_CTRL_REG 0x27
> +#define AS3722_SD_PHSW_STATUS 0x28
> +#define AS3722_SD0_CONTROL_REG 0x29
> +#define AS3722_SD1_CONTROL_REG 0x2A
> +#define AS3722_SDmph_CONTROL_REG 0x2B
> +#define AS3722_SD23_CONTROL_REG 0x2C
> +#define AS3722_SD4_CONTROL_REG 0x2D
> +#define AS3722_SD5_CONTROL_REG 0x2E
> +#define AS3722_SD6_CONTROL_REG 0x2F
> +#define AS3722_SD_DVM_REG 0x30
> +#define AS3722_RESET_REASON_REG 0x31
> +#define AS3722_BATTERY_VOLTAGE_MONITOR_REG 0x32
> +#define AS3722_STARTUP_CONTROL_REG 0x33
> +#define AS3722_RESET_TIMER_REG 0x34
> +#define AS3722_REFERENCE_CONTROL_REG 0x35
> +#define AS3722_RESET_CONTROL_REG 0x36
> +#define AS3722_OVER_TEMP_CONTROL_REG 0x37
> +#define AS3722_WATCHDOG_CONTROL_REG 0x38
> +#define AS3722_REG_STANDBY_MOD1_REG 0x39
> +#define AS3722_REG_STANDBY_MOD2_REG 0x3A
> +#define AS3722_REG_STANDBY_MOD3_REG 0x3B
> +#define AS3722_ENABLE_CTRL1_REG 0x3C
> +#define AS3722_ENABLE_CTRL2_REG 0x3D
> +#define AS3722_ENABLE_CTRL3_REG 0x3E
> +#define AS3722_ENABLE_CTRL4_REG 0x3F
> +#define AS3722_ENABLE_CTRL5_REG 0x40
> +#define AS3722_PWM_CONTROL_L_REG 0x41
> +#define AS3722_PWM_CONTROL_H_REG 0x42
> +#define AS3722_WATCHDOG_TIMER_REG 0x46
> +#define AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG 0x48
> +#define AS3722_IOVOLTAGE_REG 0x49
> +#define AS3722_BATTERY_VOLTAGE_MONITOR2_REG 0x4A
> +#define AS3722_SD_CONTROL_REG 0x4D
> +#define AS3722_LDOCONTROL0_REG 0x4E
> +#define AS3722_LDOCONTROL1_REG 0x4F
> +#define AS3722_SD0_PROTECT_REG 0x50
> +#define AS3722_SD6_PROTECT_REG 0x51
> +#define AS3722_PWM_VCONTROL1_REG 0x52
> +#define AS3722_PWM_VCONTROL2_REG 0x53
> +#define AS3722_PWM_VCONTROL3_REG 0x54
> +#define AS3722_PWM_VCONTROL4_REG 0x55
> +#define AS3722_BB_CHARGER_REG 0x57
> +#define AS3722_CTRL_SEQU1_REG 0x58
> +#define AS3722_CTRL_SEQU2_REG 0x59
> +#define AS3722_OVCURRENT_REG 0x5A
> +#define AS3722_OVCURRENT_DEB_REG 0x5B
> +#define AS3722_SDLV_DEB_REG 0x5C
> +#define AS3722_OC_PG_CTRL_REG 0x5D
> +#define AS3722_OC_PG_CTRL2_REG 0x5E
> +#define AS3722_CTRL_STATUS 0x5F
> +#define AS3722_RTC_CONTROL_REG 0x60
> +#define AS3722_RTC_SECOND_REG 0x61
> +#define AS3722_RTC_MINUTE_REG 0x62
> +#define AS3722_RTC_HOUR_REG 0x63
> +#define AS3722_RTC_DAY_REG 0x64
> +#define AS3722_RTC_MONTH_REG 0x65
> +#define AS3722_RTC_YEAR_REG 0x66
> +#define AS3722_RTC_ALARM_SECOND_REG 0x67
> +#define AS3722_RTC_ALARM_MINUTE_REG 0x68
> +#define AS3722_RTC_ALARM_HOUR_REG 0x69
> +#define AS3722_RTC_ALARM_DAY_REG 0x6A
> +#define AS3722_RTC_ALARM_MONTH_REG 0x6B
> +#define AS3722_RTC_ALARM_YEAR_REG 0x6C
> +#define AS3722_SRAM_REG 0x6D
> +#define AS3722_RTC_ACCESS_REG 0x6F
> +#define AS3722_RTC_STATUS_REG 0x73
> +#define AS3722_INTERRUPT_MASK1_REG 0x74
> +#define AS3722_INTERRUPT_MASK2_REG 0x75
> +#define AS3722_INTERRUPT_MASK3_REG 0x76
> +#define AS3722_INTERRUPT_MASK4_REG 0x77
> +#define AS3722_INTERRUPT_STATUS1_REG 0x78
> +#define AS3722_INTERRUPT_STATUS2_REG 0x79
> +#define AS3722_INTERRUPT_STATUS3_REG 0x7A
> +#define AS3722_INTERRUPT_STATUS4_REG 0x7B
> +#define AS3722_TEMP_STATUS_REG 0x7D
> +#define AS3722_ADC0_CONTROL_REG 0x80
> +#define AS3722_ADC1_CONTROL_REG 0x81
> +#define AS3722_ADC0_MSB_RESULT_REG 0x82
> +#define AS3722_ADC0_LSB_RESULT_REG 0x83
> +#define AS3722_ADC1_MSB_RESULT_REG 0x84
> +#define AS3722_ADC1_LSB_RESULT_REG 0x85
> +#define AS3722_ADC1_THRESHOLD_HI_MSB_REG 0x86
> +#define AS3722_ADC1_THRESHOLD_HI_LSB_REG 0x87
> +#define AS3722_ADC1_THRESHOLD_LO_MSB_REG 0x88
> +#define AS3722_ADC1_THRESHOLD_LO_LSB_REG 0x89
> +#define AS3722_ADC_CONFIGURATION_REG 0x8A
> +#define AS3722_ASIC_ID1_REG 0x90
> +#define AS3722_ASIC_ID2_REG 0x91
> +#define AS3722_LOCK_REG 0x9E
> +#define AS3722_MAX_REGISTER 0xF4
> +
> +#define AS3722_SD0_EXT_ENABLE_MASK 0x03
> +#define AS3722_SD1_EXT_ENABLE_MASK 0x0C
> +#define AS3722_SD2_EXT_ENABLE_MASK 0x30
> +#define AS3722_SD3_EXT_ENABLE_MASK 0xC0
> +#define AS3722_SD4_EXT_ENABLE_MASK 0x03
> +#define AS3722_SD5_EXT_ENABLE_MASK 0x0C
> +#define AS3722_SD6_EXT_ENABLE_MASK 0x30
> +#define AS3722_LDO0_EXT_ENABLE_MASK 0x03
> +#define AS3722_LDO1_EXT_ENABLE_MASK 0x0C
> +#define AS3722_LDO2_EXT_ENABLE_MASK 0x30
> +#define AS3722_LDO3_EXT_ENABLE_MASK 0xC0
> +#define AS3722_LDO4_EXT_ENABLE_MASK 0x03
> +#define AS3722_LDO5_EXT_ENABLE_MASK 0x0C
> +#define AS3722_LDO6_EXT_ENABLE_MASK 0x30
> +#define AS3722_LDO7_EXT_ENABLE_MASK 0xC0
> +#define AS3722_LDO9_EXT_ENABLE_MASK 0x0C
> +#define AS3722_LDO10_EXT_ENABLE_MASK 0x30
> +#define AS3722_LDO11_EXT_ENABLE_MASK 0xC0
> +
> +#define AS3722_OVCURRENT_SD0_ALARM_MASK 0x07
> +#define AS3722_OVCURRENT_SD0_ALARM_SHIFT 0x01
> +#define AS3722_OVCURRENT_SD0_TRIP_MASK 0x18
> +#define AS3722_OVCURRENT_SD0_TRIP_SHIFT 0x03
> +#define AS3722_OVCURRENT_SD1_TRIP_MASK 0x60
> +#define AS3722_OVCURRENT_SD1_TRIP_SHIFT 0x05
> +
> +#define AS3722_OVCURRENT_SD6_ALARM_MASK 0x07
> +#define AS3722_OVCURRENT_SD6_ALARM_SHIFT 0x01
> +#define AS3722_OVCURRENT_SD6_TRIP_MASK 0x18
> +#define AS3722_OVCURRENT_SD6_TRIP_SHIFT 0x03
> +
> +/* AS3722 register bits and bit masks */
> +#define AS3722_LDO_ILIMIT_MASK BIT(7)
> +#define AS3722_LDO_ILIMIT_BIT BIT(7)
> +#define AS3722_LDO0_VSEL_MASK 0x1F
> +#define AS3722_LDO0_VSEL_MIN 0x01
> +#define AS3722_LDO0_VSEL_MAX 0x12
> +#define AS3722_LDO0_NUM_VOLT 0x12
> +#define AS3722_LDO3_VSEL_MASK 0x3F
> +#define AS3722_LDO3_VSEL_MIN 0x01
> +#define AS3722_LDO3_VSEL_MAX 0x2D
> +#define AS3722_LDO3_NUM_VOLT 0x2D
> +#define AS3722_LDO_VSEL_MASK 0x7F
> +#define AS3722_LDO_VSEL_MIN 0x01
> +#define AS3722_LDO_VSEL_MAX 0x7F
> +#define AS3722_LDO_VSEL_DNU_MIN 0x25
> +#define AS3722_LDO_VSEL_DNU_MAX 0x3F
> +#define AS3722_LDO_NUM_VOLT 0x80
> +
> +#define AS3722_LDO0_CTRL BIT(0)
> +#define AS3722_LDO1_CTRL BIT(1)
> +#define AS3722_LDO2_CTRL BIT(2)
> +#define AS3722_LDO3_CTRL BIT(3)
> +#define AS3722_LDO4_CTRL BIT(4)
> +#define AS3722_LDO5_CTRL BIT(5)
> +#define AS3722_LDO6_CTRL BIT(6)
> +#define AS3722_LDO7_CTRL BIT(7)
> +#define AS3722_LDO9_CTRL BIT(1)
> +#define AS3722_LDO10_CTRL BIT(2)
> +#define AS3722_LDO11_CTRL BIT(3)
> +
> +#define AS3722_LDO3_MODE_MASK (3 << 6)
> +#define AS3722_LDO3_MODE_VAL(n) (((n) & 0x3) <<
> 6)
> +#define AS3722_LDO3_MODE_PMOS
> AS3722_LDO3_MODE_VAL(0)
> +#define AS3722_LDO3_MODE_PMOS_TRACKING
> AS3722_LDO3_MODE_VAL(1)
> +#define AS3722_LDO3_MODE_NMOS
> AS3722_LDO3_MODE_VAL(2)
> +#define AS3722_LDO3_MODE_SWITCH
> AS3722_LDO3_MODE_VAL(3)
> +
> +#define AS3722_SD_VSEL_MASK 0x7F
> +#define AS3722_SD0_VSEL_MIN 0x01
> +#define AS3722_SD0_VSEL_MAX 0x5A
> +#define AS3722_SD2_VSEL_MIN 0x01
> +#define AS3722_SD2_VSEL_MAX 0x7F
> +
> +#define AS3722_SDn_CTRL(n) BIT(n)
> +
> +#define AS3722_SD0_MODE_FAST BIT(4)
> +#define AS3722_SD1_MODE_FAST BIT(4)
> +#define AS3722_SD2_MODE_FAST BIT(2)
> +#define AS3722_SD3_MODE_FAST BIT(6)
> +#define AS3722_SD4_MODE_FAST BIT(2)
> +#define AS3722_SD5_MODE_FAST BIT(2)
> +#define AS3722_SD6_MODE_FAST BIT(4)
> +
> +#define AS3722_POWER_OFF BIT(1)
> +
> +#define AS3722_INTERRUPT_MASK1_LID BIT(0)
> +#define AS3722_INTERRUPT_MASK1_ACOK BIT(1)
> +#define AS3722_INTERRUPT_MASK1_ENABLE1 BIT(2)
> +#define AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0 BIT(3)
> +#define AS3722_INTERRUPT_MASK1_ONKEY_LONG BIT(4)
> +#define AS3722_INTERRUPT_MASK1_ONKEY BIT(5)
> +#define AS3722_INTERRUPT_MASK1_OVTMP BIT(6)
> +#define AS3722_INTERRUPT_MASK1_LOWBAT BIT(7)
> +
> +#define AS3722_INTERRUPT_MASK2_SD0_LV BIT(0)
> +#define AS3722_INTERRUPT_MASK2_SD1_LV BIT(1)
> +#define AS3722_INTERRUPT_MASK2_SD2345_LV BIT(2)
> +#define AS3722_INTERRUPT_MASK2_PWM1_OV_PROT BIT(3)
> +#define AS3722_INTERRUPT_MASK2_PWM2_OV_PROT BIT(4)
> +#define AS3722_INTERRUPT_MASK2_ENABLE2 BIT(5)
> +#define AS3722_INTERRUPT_MASK2_SD6_LV BIT(6)
> +#define AS3722_INTERRUPT_MASK2_RTC_REP BIT(7)
> +
> +#define AS3722_INTERRUPT_MASK3_RTC_ALARM BIT(0)
> +#define AS3722_INTERRUPT_MASK3_GPIO1 BIT(1)
> +#define AS3722_INTERRUPT_MASK3_GPIO2 BIT(2)
> +#define AS3722_INTERRUPT_MASK3_GPIO3 BIT(3)
> +#define AS3722_INTERRUPT_MASK3_GPIO4 BIT(4)
> +#define AS3722_INTERRUPT_MASK3_GPIO5 BIT(5)
> +#define AS3722_INTERRUPT_MASK3_WATCHDOG BIT(6)
> +#define AS3722_INTERRUPT_MASK3_ENABLE3 BIT(7)
> +
> +#define AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN BIT(0)
> +#define AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN BIT(1)
> +#define AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN BIT(2)
> +#define AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM BIT(3)
> +#define AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM BIT(4)
> +#define AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM BIT(5)
> +#define AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6 BIT(6)
> +#define AS3722_INTERRUPT_MASK4_ADC BIT(7)
> +
> +#define AS3722_ADC1_INTERVAL_TIME BIT(0)
> +#define AS3722_ADC1_INT_MODE_ON BIT(1)
> +#define AS3722_ADC_BUF_ON BIT(2)
> +#define AS3722_ADC1_LOW_VOLTAGE_RANGE BIT(5)
> +#define AS3722_ADC1_INTEVAL_SCAN BIT(6)
> +#define AS3722_ADC1_INT_MASK BIT(7)
> +
> +#define AS3722_ADC_MSB_VAL_MASK 0x7F
> +#define AS3722_ADC_LSB_VAL_MASK 0x07
> +
> +#define AS3722_ADC0_CONV_START BIT(7)
> +#define AS3722_ADC0_CONV_NOTREADY BIT(7)
> +#define AS3722_ADC0_SOURCE_SELECT_MASK 0x1F
> +
> +#define AS3722_ADC1_CONV_START BIT(7)
> +#define AS3722_ADC1_CONV_NOTREADY BIT(7)
> +#define AS3722_ADC1_SOURCE_SELECT_MASK 0x1F
> +
> +/* GPIO modes */
> +#define AS3722_GPIO_MODE_MASK 0x07
> +#define AS3722_GPIO_MODE_INPUT 0x00
> +#define AS3722_GPIO_MODE_OUTPUT_VDDH 0x01
> +#define AS3722_GPIO_MODE_IO_OPEN_DRAIN 0x02
> +#define AS3722_GPIO_MODE_ADC_IN 0x03
> +#define AS3722_GPIO_MODE_INPUT_PULL_UP 0x04
> +#define AS3722_GPIO_MODE_INPUT_PULL_DOWN 0x05
> +#define AS3722_GPIO_MODE_IO_OPEN_DRAIN_PULL_UP 0x06
> +#define AS3722_GPIO_MODE_OUTPUT_VDDL 0x07
> +#define AS3722_GPIO_MODE_VAL(n) \
> + ((n) & AS3722_GPIO_MODE_MASK)
> +
> +#define AS3722_GPIO_INV BIT(7)
> +#define AS3722_GPIO_IOSF_MASK 0x78
> +#define AS3722_GPIO_IOSF_VAL(n) (((n) & 0xF) <<
> 3)
> +#define AS3722_GPIO_IOSF_NORMAL
> AS3722_GPIO_IOSF_VAL(0)
> +#define AS3722_GPIO_IOSF_INTERRUPT_OUT
> AS3722_GPIO_IOSF_VAL(1)
> +#define AS3722_GPIO_IOSF_VSUP_LOW_OUT
> AS3722_GPIO_IOSF_VAL(2)
> +#define AS3722_GPIO_IOSF_GPIO_INTERRUPT_IN AS3722_GPIO_IOSF_VAL(3)
> +#define AS3722_GPIO_IOSF_ISINK_PWM_IN
> AS3722_GPIO_IOSF_VAL(4)
> +#define AS3722_GPIO_IOSF_VOLTAGE_STBY
> AS3722_GPIO_IOSF_VAL(5)
> +#define AS3722_GPIO_IOSF_PWR_GOOD_OUT
> AS3722_GPIO_IOSF_VAL(7)
> +#define AS3722_GPIO_IOSF_Q32K_OUT AS3722_GPIO_IOSF_VAL(8)
> +#define AS3722_GPIO_IOSF_WATCHDOG_IN AS3722_GPIO_IOSF_VAL(9)
> +#define AS3722_GPIO_IOSF_SOFT_RESET_IN
> AS3722_GPIO_IOSF_VAL(11)
> +#define AS3722_GPIO_IOSF_PWM_OUT AS3722_GPIO_IOSF_VAL(12)
> +#define AS3722_GPIO_IOSF_VSUP_LOW_DEB_OUT AS3722_GPIO_IOSF_VAL(13)
> +#define AS3722_GPIO_IOSF_SD6_LOW_VOLT_LOW AS3722_GPIO_IOSF_VAL(14)
> +
> +#define AS3722_GPIOn_SIGNAL(n) BIT(n)
> +#define AS3722_GPIOn_CONTROL_REG(n) \
> + (AS3722_GPIO0_CONTROL_REG + n)
> +#define AS3722_I2C_PULL_UP BIT(4)
> +#define AS3722_INT_PULL_UP BIT(5)
> +
> +#define AS3722_RTC_REP_WAKEUP_EN BIT(0)
> +#define AS3722_RTC_ALARM_WAKEUP_EN BIT(1)
> +#define AS3722_RTC_ON BIT(2)
> +#define AS3722_RTC_IRQMODE BIT(3)
> +#define AS3722_RTC_CLK32K_OUT_EN BIT(5)
> +
> +#define AS3722_WATCHDOG_TIMER_MAX 0x7F
> +#define AS3722_WATCHDOG_ON BIT(0)
> +#define AS3722_WATCHDOG_SW_SIG BIT(0)
> +
> +#define AS3722_EXT_CONTROL_ENABLE1 0x1
> +#define AS3722_EXT_CONTROL_ENABLE2 0x2
> +#define AS3722_EXT_CONTROL_ENABLE3 0x3
> +
> +/* Interrupt IDs */
> +enum as3722_irq {
> + AS3722_IRQ_LID,
> + AS3722_IRQ_ACOK,
> + AS3722_IRQ_ENABLE1,
> + AS3722_IRQ_OCCUR_ALARM_SD0,
> + AS3722_IRQ_ONKEY_LONG_PRESS,
> + AS3722_IRQ_ONKEY,
> + AS3722_IRQ_OVTMP,
> + AS3722_IRQ_LOWBAT,
> + AS3722_IRQ_SD0_LV,
> + AS3722_IRQ_SD1_LV,
> + AS3722_IRQ_SD2_LV,
> + AS3722_IRQ_PWM1_OV_PROT,
> + AS3722_IRQ_PWM2_OV_PROT,
> + AS3722_IRQ_ENABLE2,
> + AS3722_IRQ_SD6_LV,
> + AS3722_IRQ_RTC_REP,
> + AS3722_IRQ_RTC_ALARM,
> + AS3722_IRQ_GPIO1,
> + AS3722_IRQ_GPIO2,
> + AS3722_IRQ_GPIO3,
> + AS3722_IRQ_GPIO4,
> + AS3722_IRQ_GPIO5,
> + AS3722_IRQ_WATCHDOG,
> + AS3722_IRQ_ENABLE3,
> + AS3722_IRQ_TEMP_SD0_SHUTDOWN,
> + AS3722_IRQ_TEMP_SD1_SHUTDOWN,
> + AS3722_IRQ_TEMP_SD2_SHUTDOWN,
> + AS3722_IRQ_TEMP_SD0_ALARM,
> + AS3722_IRQ_TEMP_SD1_ALARM,
> + AS3722_IRQ_TEMP_SD6_ALARM,
> + AS3722_IRQ_OCCUR_ALARM_SD6,
> + AS3722_IRQ_ADC,
> + AS3722_IRQ_MAX,
> +};
> +
> +struct as3722 {
> + struct device *dev;
> + struct regmap *regmap;
> + int chip_irq;
> + unsigned long irq_flags;
> + bool enable_internal_int_pullup;
> + bool enable_internal_i2c_pullup;
Just a nit:
Any way we can shorten these even a little? en_intern_int_pullup?
> + struct regmap_irq_chip_data *irq_data;
> +};
> +
> +static inline int as3722_read(struct as3722 *as3722, u32 reg, u32 *dest)
> +{
> + return regmap_read(as3722->regmap, reg, dest);
> +}
> +
> +static inline int as3722_write(struct as3722 *as3722, u32 reg, u32 value)
> +{
> + return regmap_write(as3722->regmap, reg, value);
> +}
> +
> +static inline int as3722_block_read(struct as3722 *as3722, u32 reg,
> + int count, u8 *buf)
> +{
> + return regmap_bulk_read(as3722->regmap, reg, buf, count);
> +}
> +
> +static inline int as3722_block_write(struct as3722 *as3722, u32 reg,
> + int count, u8 *data)
> +{
> + return regmap_bulk_write(as3722->regmap, reg, data, count);
> +}
> +
> +static inline int as3722_update_bits(struct as3722 *as3722, u32 reg,
> + u32 mask, u8 val)
> +{
> + return regmap_update_bits(as3722->regmap, reg, mask, val);
> +}
> +
> +static inline int as3722_irq_get_virq(struct as3722 *as3722, int irq)
> +{
> + return regmap_irq_get_virq(as3722->irq_data, irq);
> +}
> +#endif /* __LINUX_MFD_AS3722_H__ */
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
