The flags may have to be overwritten, so add them to the CAT25_INFO
macro.
Signed-off-by: Sascha Hauer <s.ha...@pengutronix.de>
---
drivers/mtd/devices/m25p80.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 35d5851..0b8672b 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -703,13 +703,13 @@ struct flash_info {
.flags = (_flags), \
})
-#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width) \
+#define CAT25_INFO(_sector_size, _n_sectors, _page_size, _addr_width, _flags)
\
((kernel_ulong_t)&(struct flash_info) { \
.sector_size = (_sector_size), \
.n_sectors = (_n_sectors), \
.page_size = (_page_size), \
.addr_width = (_addr_width), \
- .flags = M25P_NO_ERASE, \
+ .flags = (_flags), \
})
/* NOTE: double check command sets and memory organization when you add
@@ -741,7 +741,7 @@ static const struct spi_device_id m25p_ids[] = {
{ "en25qh256", INFO(0x1c7019, 0, 64 * 1024, 512, 0) },
/* Everspin */
- { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) },
+ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2, M25P_NO_ERASE) },
/* GigaDevice */
{ "gd25q32", INFO(0xc84016, 0, 64 * 1024, 64, SECT_4K) },
@@ -856,11 +856,11 @@ static const struct spi_device_id m25p_ids[] = {
{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
/* Catalyst / On Semiconductor -- non-JEDEC */
- { "cat25c11", CAT25_INFO( 16, 8, 16, 1) },
- { "cat25c03", CAT25_INFO( 32, 8, 16, 2) },
- { "cat25c09", CAT25_INFO( 128, 8, 32, 2) },
- { "cat25c17", CAT25_INFO( 256, 8, 32, 2) },
- { "cat25128", CAT25_INFO(2048, 8, 64, 2) },
+ { "cat25c11", CAT25_INFO( 16, 8, 16, 1, M25P_NO_ERASE) },
+ { "cat25c03", CAT25_INFO( 32, 8, 16, 2, M25P_NO_ERASE) },
+ { "cat25c09", CAT25_INFO( 128, 8, 32, 2, M25P_NO_ERASE) },
+ { "cat25c17", CAT25_INFO( 256, 8, 32, 2, M25P_NO_ERASE) },
+ { "cat25128", CAT25_INFO(2048, 8, 64, 2, M25P_NO_ERASE) },
{ },
};
MODULE_DEVICE_TABLE(spi, m25p_ids);
--
1.8.4.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
