Hello.
On 08/16/2013 06:11 PM, Lad, Prabhakar wrote:
From: "Lad, Prabhakar" <prabhakar.cse...@gmail.com>
Add ethernet device tree node information and pinmux for mii to da850 by
providing interrupt details and local mac address.
Signed-off-by: Lad, Prabhakar <prabhakar.cse...@gmail.com>
---
arch/arm/boot/dts/da850-evm.dts | 5 +++++
arch/arm/boot/dts/da850.dtsi | 30 ++++++++++++++++++++++++++++++
2 files changed, 35 insertions(+)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index 1f8cfdd..44f3fbc 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -96,6 +96,11 @@
pinctrl-0 = <&mdio_pins>;
bus_freq = <2200000>;
};
+ ethernet: emac@1e20000 {
Why label the node in the board file too?
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mii_pins>;
+ };
};
nand_cs3@62000000 {
status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index d5138b4..a5d30d9 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
[...]
@@ -226,6 +242,20 @@
#size-cells = <0>;
reg = <0x224000 0x1000>;
};
+ ethernet: emac@1e20000 {
I said node should be named "ethernet", not labelled. You're the second
person that doesn't know the difference between the two. :-)
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
