Guest section DW wrote:
> On Thu, Jun 07, 2001 at 06:22:59PM +0200, Nico Schottelius wrote:
>
> > 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> > I/O error: dev 08:01, sector 127304
> > SCSI disk error : host 0 channel 0 id 0 lun 0 return code = 8000002
> > [valid=0] Info fld=0x0, Current sd08:01: sns = 70 b
> > ASC=47 ASCQ= 0
> > Raw sense data:0x70 0x00 0x0b 0x00 0x00 0x00 0x00 0x18 0x00 0x00 0x00 0x00 0x47
>0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>0x00 0x00
> > I/O error: dev 08:01, sector 127312
>
> Aborted command: SCSI parity error.
Hmm...what to do against this ?
the 'disable parity' jumper is not set, should I set it ?
Or was this something to adjust in the boot up adaptec
menu ?
Whatever, thanks a lot to here !
Nico
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
