Hello!
I don't know, maybe it's Ok, but it looks confusing - usb-uhci is listed
twice on the same IRQ 9.
# cat /proc/interrupts
CPU0
0: 82287 XT-PIC timer
1: 2624 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
9: 0 XT-PIC usb-uhci, usb-uhci
10: 781 XT-PIC eth0
11: 0 XT-PIC eth1
12: 900 XT-PIC PS/2 Mouse
14: 17434 XT-PIC ide0
15: 9 XT-PIC ide1
NMI: 0
LOC: 82250
ERR: 15
.config is here: http://www.red-bean.com/~proski/linux/config
In short, all USB stuff is compiled as modules.
# CONFIG_USB_UHCI is not set
CONFIG_USB_UHCI_ALT=m
# CONFIG_USB_OHCI is not set
It's a brand new VIA motherboard, so I don't know whether the problem
existed in the earlier kernels or not (if it's a problem).
It looks like that the motherboard has two USB controllers:
00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 02)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22)
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10)
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10)
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10)
00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev
20)
00:08.0 Ethernet controller: 3Com Corporation 3c900 10BaseT [Boomerang]
00:09.0 Ethernet controller: Bridgecom, Inc: Unknown device 0985 (rev 11)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c)
--
Regards,
Pavel Roskin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
