On Sun, Jun 03, 2001 at 06:38:27PM +0200, Gérard Roudier wrote:
> 
> On Sat, 2 Jun 2001, Matthias Schniedermeyer wrote:
>
> > I have 3 SCSI-CD-Writers. "Strange" is that the boot-process only finds
> > the first one (1 0 5 0), the other two i have to add with
> > 
> > echo "scsi add-single-device 2 0 4 0" > /proc/scsi/scsi
> > echo "scsi add-single-device 2 0 6 0" > /proc/scsi/scsi
> > 
> > to make them useable.
> > 
> > Here is the complete ist of my SCSI-Devices:
> > 
> > Host: scsi0 Channel: 00 Id: 06 Lun: 00
> >   Vendor: IBM      Model: DDYS-T18350N     Rev: S93E
> >   Type:   Direct-Access                    ANSI SCSI revision: 03
> > Host: scsi1 Channel: 00 Id: 00 Lun: 00
> >   Vendor: PLEXTOR  Model: CD-ROM PX-32TS   Rev: 1.03
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > Host: scsi1 Channel: 00 Id: 01 Lun: 00
> >   Vendor: PIONEER  Model: DVD-ROM DVD-303  Rev: 1.10
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > Host: scsi1 Channel: 00 Id: 05 Lun: 00
> >   Vendor: TEAC     Model: CD-R58S          Rev: 1.0N
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > Host: scsi2 Channel: 00 Id: 02 Lun: 00
> >   Vendor: PIONEER  Model: DVD-ROM DVD-304  Rev: 1.03
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > Host: scsi2 Channel: 00 Id: 03 Lun: 00
> >   Vendor: PIONEER  Model: DVD-ROM DVD-304  Rev: 1.03
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > Host: scsi2 Channel: 00 Id: 04 Lun: 00
> >   Vendor: TEAC     Model: CD-R58S          Rev: 1.0K
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > Host: scsi2 Channel: 00 Id: 06 Lun: 00
> >   Vendor: TEAC     Model: CD-R58S          Rev: 1.0P
> >   Type:   CD-ROM                           ANSI SCSI revision: 02
> > 
> > I have a "Symbios 53c1010 (Dual Channel Ultra 160)" and a "NCR 810a" The
> > two devices which are not found are connected through adapters onto the
> > second channel of the Symbios 53c1010.
> > 
> > Kernel is 2.4.4 or 2.4.5ac6. 
> > As host-adapter-driver i use the "SYM53C8XX"-driver
> > 
> > If other info is needed, no problem. :-)
> 
> You should check if your devices are enabled for SCAN in the NVRAM.

<Sound of head hitting the table>

I had disabled all IDs from scanning (except those which had a drive) when
i first installed the system.

Now i enabled all IDs for scanning. :-)




Bis denn

-- 
Real Programmers consider "what you see is what you get" to be just as 
bad a concept in Text Editors as it is in women. No, the Real Programmer
wants a "you asked for it, you got it" text editor -- complicated, 
cryptic, powerful, unforgiving, dangerous.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to