Add nodes for the Super Speed USB controllers, omap-control-usb,
USB2 PHY and USB3 PHY devices.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 136 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 136 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ce9a0f0..3a2e55e 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -484,6 +484,142 @@
dmas = <&sdma 70>, <&sdma 71>;
dma-names = "tx0", "rx0";
};
+
+ omap_control_usb2phy1: omap-control-usb@4a002300 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002300 0x4>;
+ reg-names = "power";
+ ti,type = <2>;
+ };
+
+ omap_control_usb3phy1: omap-control-usb@4a002370 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002370 0x4>;
+ reg-names = "power";
+ ti,type = <3>;
+ };
+
+ omap_control_usb2phy2: omap-control-usb@0x4a002e74 {
+ compatible = "ti,omap-control-usb";
+ reg = <0x4a002e74 0x4>, <0x4a0086c0 0x4>;
+ reg-names = "power", "power_aux";
+ ti,type = <4>;
+ };
+
+ ocp2scp {
+ compatible = "ti,omap-ocp2scp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp1";
+
+ usb2_phy1: usb2phy1@4a084000 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a084000 0x400>;
+ ctrl-module = <&omap_control_usb2phy1>;
+ clocks = <&usb_otg_ss1_refclk960m>,
<&usb_phy1_always_on_clk32k>;
+ clock-names = "usb_otg_ss_refclk960m",
"usb_phy_cm_clk32k";
+ };
+
+ usb2_phy2: usb2phy2@4a085000 {
+ compatible = "ti,omap-usb2";
+ reg = <0x4a085000 0x400>;
+ ctrl-module = <&omap_control_usb2phy2>;
+ clocks = <&usb_otg_ss2_refclk960m>,
<&usb_phy2_always_on_clk32k>;
+ clock-names = "usb_otg_ss_refclk960m",
"usb_phy_cm_clk32k";
+ };
+
+ usb3_phy1: usb3phy@4a084400 {
+ compatible = "ti,omap-usb3";
+ reg = <0x4a084400 0x80>,
+ <0x4a084800 0x64>,
+ <0x4a084c00 0x40>;
+ reg-names = "phy_rx", "phy_tx", "pll_ctrl";
+ ctrl-module = <&omap_control_usb3phy1>;
+ clocks = <&usb_otg_ss1_refclk960m>,
<&usb_phy3_always_on_clk32k>;
+ clock-names = "usb_otg_ss_refclk960m",
"usb_phy_cm_clk32k";
+ };
+ };
+
+ omap_dwc3_1@48880000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss1";
+ reg = <0x48880000 0x10000>;
+ interrupts = <0 77 4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ dwc3_1: dwc3@48890000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x48890000 0x17000>;
+ interrupts = <0 76 4>;
+ usb-phy = <&usb2_phy1>, <&usb3_phy1>;
+ tx-fifo-resize;
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
+
+ omap_dwc3_2@488c0000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss2";
+ reg = <0x488c0000 0x10000>;
+ interrupts = <0 92 4>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ dwc3_2: dwc3@488d0000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x488d0000 0x17000>;
+ interrupts = <0 78 4>;
+ usb-phy = <&usb2_phy2>;
+ tx-fifo-resize;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+
+ /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
+ omap_dwc3_3@48900000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss3";
+ reg = <0x48900000 0x10000>;
+ /* interrupts = <0 TBD 4>; */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ dwc3_3: dwc3@48910000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x48910000 0x17000>;
+ /* interrupts = <0 93 4>; */
+ tx-fifo-resize;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+
+ omap_dwc3_4@48940000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss4";
+ reg = <0x48940000 0x10000>;
+ /* interrupts = <0 TBD 4>; */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ dwc3_4: dwc3@48950000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x48950000 0x17000>;
+ /* interrupts = <0 TBD 4>; */
+ tx-fifo-resize;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+
};
clocks {
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
