Instead of relying on the bootloader to mux the UART pins properly, do
it on our own and register the rightful pins for the A20-olinuxino in
the DT using pinctrl.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
---
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
index 29edf8b..96e8c56 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -20,14 +20,20 @@
soc@01c20000 {
uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
uart6: serial@01c29800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart6_pins_a>;
status = "okay";
};
uart7: serial@01c29c00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
status = "okay";
};
};
--
1.8.3.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
