Hi Nishanth, On Wednesday 17 July 2013 10:15 PM, Nishanth Menon wrote:
Due to wrong older revision of documentation used as reference, we seem to have a bunch of LDOs wrongly configured on OMAP5 uEVM. This series is based power tree on production board 750-2628-XXX platform. Unfortunately, the wrong voltages may be detrimental to OMAP5 as they supply hardware blocks at voltages that are out of specification.
This series looks good to me. Acked-by: J Keerthy <j-keer...@ti.com>
Also available at: based on v3.11-rc1 tag http link: https://github.com/nmenon/linux-2.6-playground/commits/push/omap5-palmas-fixes git link: git://github.com/nmenon/linux-2.6-playground.git branch: push/omap5-palmas-fixes Tested with https://patchwork.kernel.org/patch/2545061/ + https://git.kernel.org/cgit/linux/kernel/git/ssantosh/linux.git/log/?h=for_3.11/out_of_tree/omap5_clk_data Test result: http://pastebin.com/YqASYkXG Relevant documentation: - OMAP5 uEVM documentation: https://www.svtronics.com/omap/omap54xx?product_id=33 - OMAP5432 Data Manual: http://www.ti.com/product/OMAP5432 - TWL6037 / OTP information: Currently available only under NDA Nishanth Menon (9): ARM: dts: omap5-uevm: document regulator signals used on the actual board ARM: dts: omap5-uevm: update SMPS9 settings ARM: dts: omap5-uevm: update and disable unused regulators LDO[28] ARM: dts: omap5-uevm: update LDO1 voltage to 1.5V and settings ARM: dts: omap5-uevm: update LDO3 voltage to 1.5V and settings ARM: dts: omap5-uevm: update LDO4 voltage to 1.5V and settings ARM: dts: omap5-uevm: update LDO6 voltage to 1.2V ARM: dts: omap5-uevm: update LDO7 voltage to 2V and settings ARM: dts: omap5-uevm: update SDCARD LDO9 and resource REGEN3 arch/arm/boot/dts/omap5-uevm.dts | 78 ++++++++++++++++++++++++-------------- 1 file changed, 49 insertions(+), 29 deletions(-)
Regards, Keerthy -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
