On 07/26/2013 05:27:15 AM, hongbo.zh...@freescale.com wrote:
From: Hongbo Zhang <hongbo.zh...@freescale.com>
Freescale QorIQ T4 and B4 introduce new 8-channel DMA engines, this
patch adds
the device tree nodes for them.
Signed-off-by: Hongbo Zhang <hongbo.zh...@freescale.com>
---
.../devicetree/bindings/powerpc/fsl/dma.txt | 66
++++++++++++++++
arch/powerpc/boot/dts/fsl/b4si-post.dtsi | 4 +-
arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi | 81
++++++++++++++++++++
arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi | 81
++++++++++++++++++++
arch/powerpc/boot/dts/fsl/t4240si-post.dtsi | 4 +-
5 files changed, 232 insertions(+), 4 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-0.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/elo3-dma-1.dtsi
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
index ed703d9..c9f81b9 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dma.txt
@@ -130,6 +130,72 @@ Example:
};
};
+** Freescale Elo3 DMA Controller
+ This is EloPlus controller with 8 channels, used in Freescale
Txxx and Bxxx
+ series chips, such as t1040, t4240, b4860.
+
+Required properties:
+
+- compatible : must include "fsl,elo3-dma"
OK, you fixed it here, but you still have the "fsl,CHIP-dma" language
in the rest of the document. There is no difference between elo3 and
previous chips regarding fsl,CHIP-dma as far as the binding is
concerned.
-Scott
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
