This patch fixes warning and errors found by checkpatch.pl:
* replace asm/acpi.h, asm/io.h and asm/smp.h with linux/acpi.h,
linux/io.h and linux/smp.h respectively
* remove explicit initialization to 0 of a static global variable
* replace printk(KERN_INFO ...) with pr_info
* use tabs instead of spaces for indentation
* arrange comments so that they adhere to Documentation/CodingStyle
Signed-off-by: Valentina Manea <valentina.mane...@gmail.com>
---
Changes since v1:
* cleaned up all checkpatch.pl errors according to Ingo's review
arch/x86/pci/mrst.c | 35 +++++++++++++++++++++--------------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/arch/x86/pci/mrst.c b/arch/x86/pci/mrst.c
index 6eb18c4..b0333cb 100644
--- a/arch/x86/pci/mrst.c
+++ b/arch/x86/pci/mrst.c
@@ -23,11 +23,11 @@
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/dmi.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/smp.h>
-#include <asm/acpi.h>
#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/smp.h>
#include <asm/pci_x86.h>
#include <asm/hw_irq.h>
#include <asm/io_apic.h>
@@ -43,7 +43,7 @@
#define PCI_FIXED_BAR_4_SIZE 0x14
#define PCI_FIXED_BAR_5_SIZE 0x1c
-static int pci_soc_mode = 0;
+static int pci_soc_mode;
/**
* fixed_bar_cap - return the offset of the fixed BAR cap if found
@@ -141,7 +141,8 @@ static int pci_device_update_fixed(struct pci_bus *bus,
unsigned int devfn,
*/
static bool type1_access_ok(unsigned int bus, unsigned int devfn, int reg)
{
- /* This is a workaround for A0 LNC bug where PCI status register does
+ /*
+ * This is a workaround for A0 LNC bug where PCI status register does
* not have new CAP bit set. can not be written by SW either.
*
* PCI header type in real LNC indicates a single function device, this
@@ -172,7 +173,8 @@ static int pci_write(struct pci_bus *bus, unsigned int
devfn, int where,
{
int offset;
- /* On MRST, there is no PCI ROM BAR, this will cause a subsequent read
+ /*
+ * On MRST, there is no PCI ROM BAR, this will cause a subsequent read
* to ROM BAR return 0 then being ignored.
*/
if (where == PCI_ROM_ADDRESS)
@@ -210,7 +212,8 @@ static int mrst_pci_irq_enable(struct pci_dev *dev)
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- /* MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
+ /*
+ * MRST only have IOAPIC, the PCI irq lines are 1:1 mapped to
* IOAPIC RTE entries, so we just enable RTE for the device.
*/
irq_attr.ioapic = mp_find_ioapic(dev->irq);
@@ -235,7 +238,7 @@ struct pci_ops pci_mrst_ops = {
*/
int __init pci_mrst_init(void)
{
- printk(KERN_INFO "Intel MID platform detected, using MID PCI ops\n");
+ pr_info("Intel MID platform detected, using MID PCI ops\n");
pci_mmcfg_late_init();
pcibios_enable_irq = mrst_pci_irq_enable;
pci_root_ops = pci_mrst_ops;
@@ -244,16 +247,20 @@ int __init pci_mrst_init(void)
return 1;
}
-/* Langwell devices are not true pci devices, they are not subject to 10 ms
+/*
+ * Langwell devices are not true pci devices, they are not subject to 10 ms
* d3 to d0 delay required by pci spec.
*/
static void pci_d3delay_fixup(struct pci_dev *dev)
{
- /* PCI fixups are effectively decided compile time. If we have a dual
- SoC/non-SoC kernel we don't want to mangle d3 on non SoC devices */
- if (!pci_soc_mode)
- return;
- /* true pci devices in lincroft should allow type 1 access, the rest
+ /*
+ * PCI fixups are effectively decided compile time. If we have a dual
+ * SoC/non-SoC kernel we don't want to mangle d3 on non SoC devices.
+ */
+ if (!pci_soc_mode)
+ return;
+ /*
+ * True pci devices in lincroft should allow type 1 access, the rest
* are langwell fake pci devices.
*/
if (type1_access_ok(dev->bus->number, dev->devfn, PCI_DEVICE_ID))
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
