Make the entry of Dalmore Power Management Unit device TPS65913
in dalmore DTS file. The Palma driver support this device.
Enable following submodule of the TPS65913:
- GPIO driver
- RTC driver.
- Power regulator driver.
Signed-off-by: Laxman Dewangan <ldewan...@nvidia.com>
---
Changes from V1:
- renames nodes from palams_* to simple as gpio, rtc, pmic etc.
- Added line gap properly.
- Remove comment for palams-gpio reference as the entry itself explain.
- Remove unit address for tps65913.
arch/arm/boot/dts/tegra114-dalmore.dts | 184 +++++++++++++++++++++++++++++++-
1 files changed, 183 insertions(+), 1 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts
b/arch/arm/boot/dts/tegra114-dalmore.dts
index a42bfa4..7bdad77 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -791,7 +791,7 @@
regulator-boot-on;
};
- dcdc3 {
+ tps65090_dcdc3_reg: dcdc3 {
regulator-name = "vdd-ao";
regulator-always-on;
regulator-boot-on;
@@ -836,6 +836,178 @@
};
};
};
+
+ palmas: tps65913 {
+ compatible = "ti,palmas";
+ reg = <0x58>;
+ interrupts = <0 86 0x4>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ palmas_gpio: gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&palmas>;
+ interrupts = <8 0>;
+ };
+
+ pmic {
+ compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+ smps1-in-supply = <&tps65090_dcdc3_reg>;
+ smps3-in-supply = <&tps65090_dcdc3_reg>;
+ smps4-in-supply = <&tps65090_dcdc2_reg>;
+ smps7-in-supply = <&tps65090_dcdc2_reg>;
+ smps8-in-supply = <&tps65090_dcdc2_reg>;
+ smps9-in-supply = <&tps65090_dcdc2_reg>;
+ ldo1-in-supply = <&tps65090_dcdc2_reg>;
+ ldo2-in-supply = <&tps65090_dcdc2_reg>;
+ ldo3-in-supply = <&palmas_smps3_reg>;
+ ldo4-in-supply = <&tps65090_dcdc2_reg>;
+ ldo5-in-supply = <&vdd_ac_bat_reg>;
+ ldo6-in-supply = <&tps65090_dcdc2_reg>;
+ ldo7-in-supply = <&tps65090_dcdc2_reg>;
+ ldo8-in-supply = <&tps65090_dcdc3_reg>;
+ ldo9-in-supply = <&palmas_smps9_reg>;
+ ldoln-in-supply = <&tps65090_dcdc1_reg>;
+ ldousb-in-supply = <&tps65090_dcdc1_reg>;
+
+ regulators {
+ smps12 {
+ regulator-name = "vddio-ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ palmas_smps3_reg: smps3 {
+ regulator-name = "vddio-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45 {
+ regulator-name = "vdd-core";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps457 {
+ regulator-name = "vdd-core";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8 {
+ regulator-name = "avdd-pll";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ palmas_smps9_reg: smps9 {
+ regulator-name = "sdhci-vdd-sd-slot";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "avdd-cam1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo2 {
+ regulator-name = "avdd-cam2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo3 {
+ regulator-name = "avdd-dsi-csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4 {
+ regulator-name = "vpp-fuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6 {
+ regulator-name = "vdd-sensor-2v85";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ ldo7 {
+ regulator-name = "vdd-af-cam1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo8 {
+ regulator-name = "vdd-rtc";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,enable-ldo8-tracking;
+ };
+
+ ldo9 {
+ regulator-name = "vddio-sdmmc-2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldoln {
+ regulator-name = "hvdd-usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldousb {
+ regulator-name = "avdd-usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen1 {
+ regulator-name = "rail-3v3";
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen2 {
+ regulator-name = "rail-5v0";
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
};
spi@7000da00 {
@@ -980,6 +1152,16 @@
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
vin-supply = <&tps65090_dcdc1_reg>;
};
+
+ vdd_cam_1v8_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vdd_cam_1v8_reg";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&palmas_gpio 6 0>;
+ };
};
sound {
--
1.7.1.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
