From: Dmitry Fink <fi...@ti.com>
Current logic results in interrupt storm since the fifo
is constantly below the threshold level. Change the logic
to fill all the available spaces in the fifo as long as
we have data to minimize the possibilty of underflow and
elimiate excessive interrupts.
Signed-off-by: Dmitry Fink <fi...@ti.com>
Signed-off-by: Alexander Savchenko <oleksandr.savche...@ti.com>
---
[rebased according to 3.10]
drivers/tty/serial/omap-serial.c | 3 ++-
include/uapi/linux/serial_reg.h | 1 +
2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index fe50375..6a07a9b 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -316,7 +316,8 @@ static void transmit_chars(struct uart_omap_port *up,
unsigned int lsr)
serial_omap_stop_tx(&up->port);
return;
}
- count = up->port.fifosize / 4;
+ count = up->port.fifosize -
+ (serial_in(up, UART_OMAP_TXFIFO_LVL) & 0xFF);
do {
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h
index e632260..97c26be 100644
--- a/include/uapi/linux/serial_reg.h
+++ b/include/uapi/linux/serial_reg.h
@@ -366,6 +366,7 @@
#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */
#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */
#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */
+#define UART_OMAP_TXFIFO_LVL 0x1A /* TX FIFO fullness */
/*
* These are definitions for the Exar XR17V35X and XR17(C|D)15X
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
