Add necessary code to restart ux500 based machines using
prcmu_system_reset().
Signed-off-by: Fabio Baltieri <fabio.balti...@linaro.org>
---
Hi Linus,
this is something I had in my tree for some time. This adds basic
soft-reboot support for all ux500 machines using prcmu (the actual
reboot code was already there) and may also be useful as a base to add
the remaining "reboot reason" code if necessary.
This is based on your current ste-next branch.
Thanks,
Fabio
arch/arm/mach-ux500/board-mop500.c | 4 ++++
arch/arm/mach-ux500/cpu-db8500.c | 1 +
arch/arm/mach-ux500/cpu.c | 8 ++++++++
arch/arm/mach-ux500/setup.h | 2 ++
4 files changed, 15 insertions(+)
diff --git a/arch/arm/mach-ux500/board-mop500.c
b/arch/arm/mach-ux500/board-mop500.c
index 2d70e2b..bb569bf 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -697,6 +697,7 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
@@ -706,6 +707,7 @@ MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
.init_time = ux500_timer_init,
.init_machine = mop500_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
@@ -716,6 +718,7 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform
HREFv60+")
.init_time = ux500_timer_init,
.init_machine = hrefv60_init_machine,
.init_late = ux500_init_late,
+ .restart = ux500_restart,
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
@@ -727,4 +730,5 @@ MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
.init_time = ux500_timer_init,
.init_machine = snowball_init_machine,
.init_late = NULL,
+ .restart = ux500_restart,
MACHINE_END
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 27e5566..caded58 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -326,6 +326,7 @@ DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform
(Device Tree Support)")
.init_machine = u8500_init_machine,
.init_late = NULL,
.dt_compat = stericsson_dt_platform_compat,
+ .restart = ux500_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index b6145ea..7490224 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -31,6 +31,14 @@
#include "db8500-regs.h"
#include "id.h"
+void ux500_restart(char mode, const char *cmd)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ prcmu_system_reset(0);
+}
+
/*
* FIXME: Should we set up the GPIO domain here?
*
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index cad3ca8..e8be021 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -15,6 +15,8 @@
#include <linux/init.h>
#include <linux/mfd/abx500/ab8500.h>
+void ux500_restart(char mode, const char *cmd);
+
void __init ux500_map_io(void);
extern void __init u8500_map_io(void);
--
1.8.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
