The driver generates an event in /dev/input/ under the name
'bh1770'. It's a switch event where is reported '0' or '1'
whenever the sensor detects something crossing the threshold.
Signed-off-by: Onur Atilla <oati...@gmail.com>
Signed-off-by: Phil Carmody <p...@asdf.org>
Signed-off-by: Andi Shyti <a...@etezian.org>
---
drivers/misc/bh1770glc.c | 58 +++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 57 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c
index f4975f7..d60b317 100644
--- a/drivers/misc/bh1770glc.c
+++ b/drivers/misc/bh1770glc.c
@@ -34,6 +34,7 @@
#include <linux/delay.h>
#include <linux/wait.h>
#include <linux/slab.h>
+#include <linux/input.h>
#define BH1770_ALS_CONTROL 0x80 /* ALS operation mode control */
#define BH1770_PS_CONTROL 0x81 /* PS operation mode control */
@@ -168,6 +169,8 @@ struct bh1770_chip {
bool prox_force_update;
u8 prox_abs_thres;
u8 prox_led;
+
+ struct input_dev *input_dev;
};
static const char reg_vcc[] = "Vcc";
@@ -461,6 +464,11 @@ static int bh1770_prox_mode_control(struct bh1770_chip
*chip)
return 0;
}
+static void bh1770_report_input_value(struct bh1770_chip *chip, int val)
+{
+ input_report_switch(chip->input_dev, SW_FRONT_PROXIMITY, val);
+}
+
/* chip->mutex is kept when this is called */
static int bh1770_prox_read_result(struct bh1770_chip *chip)
{
@@ -506,13 +514,13 @@ static int bh1770_prox_read_result(struct bh1770_chip
*chip)
} else {
chip->prox_persistence_counter = 0;
mode = PROX_BELOW_THRESHOLD;
- chip->prox_data = 0;
ret = 0;
}
/* Set proximity detection rate based on above or below value */
if (ret == 0) {
bh1770_prox_rate(chip, mode);
+ bh1770_report_input_value(chip, mode);
sysfs_notify(&chip->client->dev.kobj, NULL, "prox0_raw");
}
out:
@@ -818,6 +826,42 @@ static int bh1770_prox_rate_validate(int rate)
return i;
}
+static void bh1770_input_cleanup(struct bh1770_chip *chip)
+{
+ input_unregister_device(chip->input_dev);
+}
+
+static int bh1770_input_init(struct bh1770_chip *chip)
+{
+ int err;
+
+ chip->input_dev = input_allocate_device();
+ if (!chip->input_dev) {
+ err = -ENOMEM;
+ goto alloc_err;
+ }
+
+ chip->input_dev->id.bustype = BUS_I2C;
+ chip->input_dev->dev.parent = &chip->client->dev;
+ chip->input_dev->name = "bh1770glc";
+
+ input_set_drvdata(chip->input_dev, chip);
+
+ set_bit(EV_SW, chip->input_dev->evbit);
+ set_bit(SW_FRONT_PROXIMITY, chip->input_dev->swbit);
+
+ err = input_register_device(chip->input_dev);
+ if (err)
+ goto reg_err;
+
+ return 0;
+
+reg_err:
+ input_free_device(chip->input_dev);
+alloc_err:
+ return err;
+}
+
static ssize_t bh1770_set_prox_rate_above(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -1246,6 +1290,13 @@ static int bh1770_probe(struct i2c_client *client,
}
}
+ err = bh1770_input_init(chip);
+ if (err < 0) {
+ dev_err(&client->dev,
+ "impossible to allocate input event device\n");
+ goto no_input_dev;
+ }
+
err = sysfs_create_group(&chip->client->dev.kobj,
&bh1770_attribute_group);
if (err < 0) {
@@ -1274,6 +1325,8 @@ fail5:
sysfs_remove_group(&chip->client->dev.kobj,
&bh1770_attribute_group);
fail4:
+ bh1770_input_cleanup(chip);
+no_input_dev:
if (chip->pdata->release_resources)
chip->pdata->release_resources();
fail3:
@@ -1294,6 +1347,9 @@ static int bh1770_remove(struct i2c_client *client)
sysfs_remove_group(&chip->client->dev.kobj,
&bh1770_attribute_group);
+ /* input interface cleanup */
+ bh1770_input_cleanup(chip);
+
if (chip->pdata->release_resources)
chip->pdata->release_resources();
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
