On Fri 31 May 2013 03:51:51 AM CST, Rafael J. Wysocki wrote:
> On Thursday, May 30, 2013 11:33:56 AM Bjorn Helgaas wrote:
>> On Tue, May 14, 2013 at 09:00:39PM +0800, Jiang Liu wrote:
>>> Use acpi_handle_print() and pr_xxx() to print messages in pci_root.c.
>>>
>>> Signed-off-by: Jiang Liu <jiang....@huawei.com>
>>> Cc: Len Brown <l...@kernel.org>
>>> Cc: "Rafael J. Wysocki" <r...@sisk.pl>
>>> Cc: linux-a...@vger.kernel.org
>>> Cc: linux-kernel@vger.kernel.org
>>> ---
>>> drivers/acpi/pci_root.c | 70
>>> ++++++++++++++++++++++---------------------------
>>> 1 file changed, 32 insertions(+), 38 deletions(-)
>>>
>>> diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c
>>> index 91ddfd6..21dda5a 100644
>>> --- a/drivers/acpi/pci_root.c
>>> +++ b/drivers/acpi/pci_root.c
>>> @@ -379,23 +379,24 @@ static int acpi_pci_root_add(struct acpi_device
>>> *device,
>>> struct acpi_pci_root *root;
>>> u32 flags, base_flags;
>>> bool is_osc_granted = false;
>>> + acpi_handle handle = device->handle;
>>>
>>> root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL);
>>> if (!root)
>>> return -ENOMEM;
>>>
>>> segment = 0;
>>> - status = acpi_evaluate_integer(device->handle, METHOD_NAME__SEG, NULL,
>>> + status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL,
>>> &segment);
>>> if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
>>> - printk(KERN_ERR PREFIX "can't evaluate _SEG\n");
>>> + acpi_handle_err(handle, "can't evaluate _SEG\n");
>>
>> I previously acked this, but I noticed that we are making a mix of
>> dev_printk() and acpi_handle_printk() here. The difference is like this:
>>
>> acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
>> ACPI: \_SB_.PCI0: ACPI _OSC support notification failed, disabling PCIe
>> ASPM
>>
>> I'm not sure which direction we should go here, but I think we should
>> choose one or the other and use it consistently. Personally, I think the
>> internal DSDT names should be available *somewhere*, but not necessarily
>> used in run-of-the-mill chit-chat. For that reason, I prefer
>> dev_printk(), though I have the feeling that Rafael is moving toward
>> eliminating the struct acpi_device, so he might prefer
>> acpi_handle_printk().
>
> I really don't care that much, but I agree that they should be used
> consistently.
Hi Bjorn and Rafael,
I will work on this tomorrow. In some cases, only handle is
available, so we
could only use acpi_handle_printk(). So I think the directly may be:
use dev_printk()
if possible, otherwise use acpi_handle_printk() instead. Is that the
right way to go?
Regards!
Gerry
>
> Thanks,
> Rafael
>
>
>>> result = -ENODEV;
>>> goto end;
>>> }
>>>
>>> /* Check _CRS first, then _BBN. If no _BBN, default to zero. */
>>> root->secondary.flags = IORESOURCE_BUS;
>>> - status = try_get_root_bridge_busnr(device->handle, &root->secondary);
>>> + status = try_get_root_bridge_busnr(handle, &root->secondary);
>>> if (ACPI_FAILURE(status)) {
>>> /*
>>> * We need both the start and end of the downstream bus range
>>> @@ -404,16 +405,16 @@ static int acpi_pci_root_add(struct acpi_device
>>> *device,
>>> * can do is assume [_BBN-0xFF] or [0-0xFF].
>>> */
>>> root->secondary.end = 0xFF;
>>> - printk(KERN_WARNING FW_BUG PREFIX
>>> - "no secondary bus range in _CRS\n");
>>> - status = acpi_evaluate_integer(device->handle, METHOD_NAME__BBN,
>>> + acpi_handle_warn(handle,
>>> + FW_BUG "no secondary bus range in _CRS\n");
>>> + status = acpi_evaluate_integer(handle, METHOD_NAME__BBN,
>>> NULL, &bus);
>>> if (ACPI_SUCCESS(status))
>>> root->secondary.start = bus;
>>> else if (status == AE_NOT_FOUND)
>>> root->secondary.start = 0;
>>> else {
>>> - printk(KERN_ERR PREFIX "can't evaluate _BBN\n");
>>> + acpi_handle_err(handle, "can't evaluate _BBN\n");
>>> result = -ENODEV;
>>> goto end;
>>> }
>>> @@ -425,11 +426,11 @@ static int acpi_pci_root_add(struct acpi_device
>>> *device,
>>> strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
>>> device->driver_data = root;
>>>
>>> - printk(KERN_INFO PREFIX "%s [%s] (domain %04x %pR)\n",
>>> + pr_info(PREFIX "%s [%s] (domain %04x %pR)\n",
>>> acpi_device_name(device), acpi_device_bid(device),
>>> root->segment, &root->secondary);
>>>
>>> - root->mcfg_addr = acpi_pci_root_get_mcfg_addr(device->handle);
>>> + root->mcfg_addr = acpi_pci_root_get_mcfg_addr(handle);
>>>
>>> /*
>>> * All supported architectures that use ACPI have support for
>>> @@ -473,7 +474,7 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>> dev_info(&device->dev,
>>> "Requesting ACPI _OSC control (0x%02x)\n", flags);
>>>
>>> - status = acpi_pci_osc_control_set(device->handle, &flags,
>>> + status = acpi_pci_osc_control_set(handle, &flags,
>>> OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
>>> if (ACPI_SUCCESS(status)) {
>>> is_osc_granted = true;
>>> @@ -505,9 +506,9 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>> */
>>> root->bus = pci_acpi_scan_root(root);
>>> if (!root->bus) {
>>> - printk(KERN_ERR PREFIX
>>> - "Bus %04x:%02x not present in PCI namespace\n",
>>> - root->segment, (unsigned int)root->secondary.start);
>>> + acpi_handle_err(handle,
>>> + "Bus %04x:%02x not present in PCI namespace\n",
>>> + root->segment, (unsigned int)root->secondary.start);
>>> result = -ENODEV;
>>> goto end;
>>> }
>>> @@ -517,8 +518,8 @@ static int acpi_pci_root_add(struct acpi_device *device,
>>> if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_ASPM)
>>> pcie_clear_aspm(root->bus);
>>> } else {
>>> - pr_info("ACPI _OSC control for PCIe not granted, "
>>> - "disabling ASPM\n");
>>> + acpi_handle_info(handle,
>>> + "ACPI _OSC control for PCIe not granted, disabling
>>> ASPM\n");
>>> pcie_no_aspm();
>>> }
>>>
>>> @@ -571,12 +572,13 @@ static void handle_root_bridge_insertion(acpi_handle
>>> handle)
>>> struct acpi_device *device;
>>>
>>> if (!acpi_bus_get_device(handle, &device)) {
>>> - printk(KERN_DEBUG "acpi device exists...\n");
>>> + acpi_handle_printk(KERN_DEBUG, handle,
>>> + "acpi device exists...\n");
>>> return;
>>> }
>>>
>>> if (acpi_bus_scan(handle))
>>> - printk(KERN_ERR "cannot add bridge to acpi list\n");
>>> + acpi_handle_err(handle, "cannot add bridge to acpi list\n");
>>> }
>>>
>>> static void handle_root_bridge_removal(struct acpi_device *device)
>>> @@ -602,7 +604,6 @@ static void handle_root_bridge_removal(struct
>>> acpi_device *device)
>>> static void _handle_hotplug_event_root(struct work_struct *work)
>>> {
>>> struct acpi_pci_root *root;
>>> - struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER };
>>> struct acpi_hp_work *hp_work;
>>> acpi_handle handle;
>>> u32 type;
>>> @@ -613,13 +614,11 @@ static void _handle_hotplug_event_root(struct
>>> work_struct *work)
>>>
>>> root = acpi_pci_find_root(handle);
>>>
>>> - acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
>>> -
>>> switch (type) {
>>> case ACPI_NOTIFY_BUS_CHECK:
>>> /* bus enumerate */
>>> - printk(KERN_DEBUG "%s: Bus check notify on %s\n", __func__,
>>> - (char *)buffer.pointer);
>>> + acpi_handle_printk(KERN_DEBUG, handle,
>>> + "Bus check notify on %s\n", __func__);
>>> if (!root)
>>> handle_root_bridge_insertion(handle);
>>>
>>> @@ -627,27 +626,26 @@ static void _handle_hotplug_event_root(struct
>>> work_struct *work)
>>>
>>> case ACPI_NOTIFY_DEVICE_CHECK:
>>> /* device check */
>>> - printk(KERN_DEBUG "%s: Device check notify on %s\n", __func__,
>>> - (char *)buffer.pointer);
>>> + acpi_handle_printk(KERN_DEBUG, handle,
>>> + "Device check notify on %s\n", __func__);
>>> if (!root)
>>> handle_root_bridge_insertion(handle);
>>> break;
>>>
>>> case ACPI_NOTIFY_EJECT_REQUEST:
>>> /* request device eject */
>>> - printk(KERN_DEBUG "%s: Device eject notify on %s\n", __func__,
>>> - (char *)buffer.pointer);
>>> + acpi_handle_printk(KERN_DEBUG, handle,
>>> + "Device eject notify on %s\n", __func__);
>>> if (root)
>>> handle_root_bridge_removal(root->device);
>>> break;
>>> default:
>>> - printk(KERN_WARNING "notify_handler: unknown event type 0x%x
>>> for %s\n",
>>> - type, (char *)buffer.pointer);
>>> + acpi_handle_warn(handle,
>>> + "notify_handler: unknown event type 0x%x\n", type);
>>> break;
>>> }
>>>
>>> kfree(hp_work); /* allocated in handle_hotplug_event_bridge */
>>> - kfree(buffer.pointer);
>>> }
>>>
>>> static void handle_hotplug_event_root(acpi_handle handle, u32 type,
>>> @@ -661,9 +659,6 @@ static acpi_status __init
>>> find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
>>> {
>>> acpi_status status;
>>> - char objname[64];
>>> - struct acpi_buffer buffer = { .length = sizeof(objname),
>>> - .pointer = objname };
>>> int *count = (int *)context;
>>>
>>> if (!acpi_is_root_bridge(handle))
>>> @@ -671,16 +666,15 @@ find_root_bridges(acpi_handle handle, u32 lvl, void
>>> *context, void **rv)
>>>
>>> (*count)++;
>>>
>>> - acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
>>> -
>>> status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
>>> handle_hotplug_event_root, NULL);
>>> if (ACPI_FAILURE(status))
>>> - printk(KERN_DEBUG "acpi root: %s notify handler is not
>>> installed, exit status: %u\n",
>>> - objname, (unsigned int)status);
>>> + acpi_handle_printk(KERN_DEBUG, handle,
>>> + "notify handler is not installed, exit status: %u\n",
>>> + (unsigned int)status);
>>> else
>>> - printk(KERN_DEBUG "acpi root: %s notify handler is installed\n",
>>> - objname);
>>> + acpi_handle_printk(KERN_DEBUG, handle,
>>> + "notify handler is installed\n");
>>>
>>> return AE_OK;
>>> }
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
