From: Petko Manolov <pet...@nucleusys.com>
Moving constant and structure definitions out of rtl8150.c;
Signed-off-by: Petko Manolov <pet...@nucleusys.com>
---
drivers/net/usb/rtl8150.c | 121 +----------------------------------
1 file changed, 2 insertions(+), 119 deletions(-)
diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c
index a491d3a..7d1897b 100644
--- a/drivers/net/usb/rtl8150.c
+++ b/drivers/net/usb/rtl8150.c
@@ -17,132 +17,15 @@
#include <linux/usb.h>
#include <asm/uaccess.h>
+#include "rtl8150.h"
+
/* Version Information */
#define DRIVER_VERSION "v0.6.2 (2004/08/27)"
#define DRIVER_AUTHOR "Petko Manolov <pet...@users.sourceforge.net>"
#define DRIVER_DESC "rtl8150 based usb-ethernet driver"
-#define IDR 0x0120
-#define MAR 0x0126
-#define CR 0x012e
-#define TCR 0x012f
-#define RCR 0x0130
-#define TSR 0x0132
-#define RSR 0x0133
-#define CON0 0x0135
-#define CON1 0x0136
-#define MSR 0x0137
-#define PHYADD 0x0138
-#define PHYDAT 0x0139
-#define PHYCNT 0x013b
-#define GPPC 0x013d
-#define BMCR 0x0140
-#define BMSR 0x0142
-#define ANAR 0x0144
-#define ANLP 0x0146
-#define AER 0x0148
-#define CSCR 0x014C /* This one has the link status */
-#define CSCR_LINK_STATUS (1 << 3)
-
-#define IDR_EEPROM 0x1202
-
-#define PHY_READ 0
-#define PHY_WRITE 0x20
-#define PHY_GO 0x40
-
-#define MII_TIMEOUT 10
-#define INTBUFSIZE 8
-
-#define RTL8150_REQT_READ 0xc0
-#define RTL8150_REQT_WRITE 0x40
-#define RTL8150_REQ_GET_REGS 0x05
-#define RTL8150_REQ_SET_REGS 0x05
-
-
-/* Transmit status register errors */
-#define TSR_ECOL (1<<5)
-#define TSR_LCOL (1<<4)
-#define TSR_LOSS_CRS (1<<3)
-#define TSR_JBR (1<<2)
-#define TSR_ERRORS (TSR_ECOL | TSR_LCOL | TSR_LOSS_CRS | TSR_JBR)
-/* Receive status register errors */
-#define RSR_CRC (1<<2)
-#define RSR_FAE (1<<1)
-#define RSR_ERRORS (RSR_CRC | RSR_FAE)
-
-/* Media status register definitions */
-#define MSR_DUPLEX (1<<4)
-#define MSR_SPEED (1<<3)
-#define MSR_LINK (1<<2)
-
-/* Interrupt pipe data */
-#define INT_TSR 0x00
-#define INT_RSR 0x01
-#define INT_MSR 0x02
-#define INT_WAKSR 0x03
-#define INT_TXOK_CNT 0x04
-#define INT_RXLOST_CNT 0x05
-#define INT_CRERR_CNT 0x06
-#define INT_COL_CNT 0x07
-
-
-#define RTL8150_MTU 1540
-#define RTL8150_TX_TIMEOUT (HZ)
-#define RX_SKB_POOL_SIZE 4
-
-/* rtl8150 flags */
-#define RTL8150_HW_CRC 0
-#define RX_REG_SET 1
-#define RTL8150_UNPLUG 2
-#define RX_URB_FAIL 3
-
-/* Define these values to match your device */
-#define VENDOR_ID_REALTEK 0x0bda
-#define VENDOR_ID_MELCO 0x0411
-#define VENDOR_ID_MICRONET 0x3980
-#define VENDOR_ID_LONGSHINE 0x07b8
-#define VENDOR_ID_OQO 0x1557
-#define VENDOR_ID_ZYXEL 0x0586
-
-#define PRODUCT_ID_RTL8150 0x8150
-#define PRODUCT_ID_LUAKTX 0x0012
-#define PRODUCT_ID_LCS8138TX 0x401a
-#define PRODUCT_ID_SP128AR 0x0003
-#define PRODUCT_ID_PRESTIGE 0x401a
-
-#undef EEPROM_WRITE
-
-/* table of devices that work with this driver */
-static struct usb_device_id rtl8150_table[] = {
- {USB_DEVICE(VENDOR_ID_REALTEK, PRODUCT_ID_RTL8150)},
- {USB_DEVICE(VENDOR_ID_MELCO, PRODUCT_ID_LUAKTX)},
- {USB_DEVICE(VENDOR_ID_MICRONET, PRODUCT_ID_SP128AR)},
- {USB_DEVICE(VENDOR_ID_LONGSHINE, PRODUCT_ID_LCS8138TX)},
- {USB_DEVICE(VENDOR_ID_OQO, PRODUCT_ID_RTL8150)},
- {USB_DEVICE(VENDOR_ID_ZYXEL, PRODUCT_ID_PRESTIGE)},
- {}
-};
-
MODULE_DEVICE_TABLE(usb, rtl8150_table);
-struct rtl8150 {
- unsigned long flags;
- struct usb_device *udev;
- struct tasklet_struct tl;
- struct net_device *netdev;
- struct urb *rx_urb, *tx_urb, *intr_urb, *ctrl_urb;
- struct sk_buff *tx_skb, *rx_skb;
- struct sk_buff *rx_skb_pool[RX_SKB_POOL_SIZE];
- spinlock_t rx_pool_lock;
- struct usb_ctrlrequest dr;
- int intr_interval;
- __le16 rx_creg;
- u8 *intr_buff;
- u8 phy;
-};
-
-typedef struct rtl8150 rtl8150_t;
-
static const char driver_name [] = "rtl8150";
/*
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
