Commit 749a2b6 (net/macb: clear tx/rx completion flags in ISR)
introduces clear-on-write on ISR register. This behavior is not always
implemented when using Cadence MACB/GEM and is breaking other platforms.
We are using the Design Configuration Register 1 information and a capability
property to actually activate this clear-on-write behavior on ISR.
Reported-by: Hein Tibosch <hein_tibo...@yahoo.es>
Signed-off-by: Nicolas Ferre <nicolas.fe...@atmel.com>
---
v2: - use DCFG1 bit 23 integration information instead of device tree
compatibility string to retreive information about c-o-r vs. c-o-w ISR.
- move configuration in macb_init_hw() function instead of probe() - at
"open" time.
As I have changed the most of this patch, I will collect your Ack and feedback
just like a new patch. Thanks for your help...
Bye,
drivers/net/ethernet/cadence/macb.c | 18 ++++++++++++++++--
drivers/net/ethernet/cadence/macb.h | 7 +++++++
2 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb.c
b/drivers/net/ethernet/cadence/macb.c
index 6be513d..c89aa41 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -485,7 +485,8 @@ static void macb_tx_interrupt(struct macb *bp)
status = macb_readl(bp, TSR);
macb_writel(bp, TSR, status);
- macb_writel(bp, ISR, MACB_BIT(TCOMP));
+ if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+ macb_writel(bp, ISR, MACB_BIT(TCOMP));
netdev_vdbg(bp->dev, "macb_tx_interrupt status = 0x%03lx\n",
(unsigned long)status);
@@ -738,7 +739,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
* now.
*/
macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
- macb_writel(bp, ISR, MACB_BIT(RCOMP));
+ if (bp->caps & MACB_CAPS_ISR_CLEAR_ON_WRITE)
+ macb_writel(bp, ISR, MACB_BIT(RCOMP));
if (napi_schedule_prep(&bp->napi)) {
netdev_vdbg(bp->dev, "scheduling RX softirq\n");
@@ -1062,6 +1064,17 @@ static void macb_configure_dma(struct macb *bp)
}
}
+/*
+ * Configure peripheral capacities according to integration options used
+ */
+static void macb_configure_caps(struct macb *bp)
+{
+ if (macb_is_gem(bp)) {
+ if (GEM_BF(IRQCOR, gem_readl(bp, DCFG1)) == 0)
+ bp->caps |= MACB_CAPS_ISR_CLEAR_ON_WRITE;
+ }
+}
+
static void macb_init_hw(struct macb *bp)
{
u32 config;
@@ -1084,6 +1097,7 @@ static void macb_init_hw(struct macb *bp)
bp->duplex = DUPLEX_HALF;
macb_configure_dma(bp);
+ macb_configure_caps(bp);
/* Initialize TX and RX buffers */
macb_writel(bp, RBQP, bp->rx_ring_dma);
diff --git a/drivers/net/ethernet/cadence/macb.h
b/drivers/net/ethernet/cadence/macb.h
index 993d703..548c0ec 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -300,6 +300,8 @@
#define MACB_REV_SIZE 16
/* Bitfields in DCFG1. */
+#define GEM_IRQCOR_OFFSET 23
+#define GEM_IRQCOR_SIZE 1
#define GEM_DBWDEF_OFFSET 25
#define GEM_DBWDEF_SIZE 3
@@ -323,6 +325,9 @@
#define MACB_MAN_READ 2
#define MACB_MAN_CODE 2
+/* Capability mask bits */
+#define MACB_CAPS_ISR_CLEAR_ON_WRITE 0x1
+
/* Bit manipulation macros */
#define MACB_BIT(name) \
(1 << MACB_##name##_OFFSET)
@@ -574,6 +579,8 @@ struct macb {
unsigned int speed;
unsigned int duplex;
+ u32 caps;
+
phy_interface_t phy_interface;
/* AT91RM9200 transmit */
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
