When p3 is eual to 0 then result for fOUT is 0. In that case we should
return 0 not parent_rate;
This issue was causing deadlock in si5351 chip when user set_rate for
ms0->clk0 and then set_rate for ms1->clk1 (both ms sourced from plla).
After that clk1 was 0 and it wasn't possible to enable it again (try also
manually with i2cset commands). Only power cycle helps.
Signed-off-by: Marek Belisko <marek.beli...@streamunlimited.com>
---
drivers/clk/clk-si5351.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/clk-si5351.c b/drivers/clk/clk-si5351.c
index fc215ce..a8fc0f4 100644
--- a/drivers/clk/clk-si5351.c
+++ b/drivers/clk/clk-si5351.c
@@ -607,7 +607,7 @@ static unsigned long si5351_msynth_recalc_rate(struct
clk_hw *hw,
si5351_read_parameters(hwdata->drvdata, reg, &hwdata->params);
if (hwdata->params.p3 == 0)
- return parent_rate;
+ return 0;
/*
* multisync0-5: fOUT = (128 * P3 * fIN) / (P1*P3 + P2 + 512*P3)
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
