This patch fixes the baud rate in the mct_u232 driver when
used with the Sitecom device.
I only have the Sitecom device available so I've corrected the
baud rate calculation only for this model. Someone with a
real MCT or DLINK device should verify the original baud rate
calculation, because I suspect it to be wrong for all models
this driver supports (the same Windows driver is used for all
this models, so I suppose there is a unique baud rate calculation...).
Anyway, this enables me to use my Siemens S25 cell modem (working
only at a fixed baud rate of 19200) with this adapter, so it may
be useful for some other people.
Please note that I'm not subscribed to linux-usb-devel, only to
linux-kernel...
Stelian.
diff -uNr linux-2.4.4.orig/drivers/usb/serial/mct_u232.c
linux-2.4.4/drivers/usb/serial/mct_u232.c
--- linux-2.4.4.orig/drivers/usb/serial/mct_u232.c Wed May 2 15:07:45 2001
+++ linux-2.4.4/drivers/usb/serial/mct_u232.c Wed May 2 14:49:15 2001
@@ -24,6 +24,9 @@
* Basic tests have been performed with minicom/zmodem transfers and
* modem dialing under Linux 2.4.0-test10 (for me it works fine).
*
+ * 02-May-2001 Stelian Pop
+ * - Fixed the baud calculation for Sitecom U232-P25 model
+ *
* 06-Jan-2001 Cornel Ciocirlan
* - Added support for Sitecom U232-P25 model (Product Id 0x0230)
* - Added support for D-Link DU-H3SP USB BAY (Product Id 0x0200)
@@ -218,11 +221,31 @@
#define WDR_TIMEOUT (HZ * 5 ) /* default urb timeout */
+static int mct_u232_calculate_baud_rate(struct usb_serial *serial, int value) {
+ if (serial->dev->descriptor.idProduct == MCT_U232_SITECOM_PID) {
+ switch (value) {
+ case 300: return 0x01;
+ case 600: return 0x02; /* this one not tested */
+ case 1200: return 0x03;
+ case 2400: return 0x04;
+ case 4800: return 0x06;
+ case 9600: return 0x08;
+ case 19200: return 0x09;
+ case 38400: return 0x0a;
+ case 57600: return 0x0b;
+ case 115200: return 0x0c;
+ default: return -1; /* normally not reached */
+ }
+ }
+ else
+ return MCT_U232_BAUD_RATE(value);
+}
+
static int mct_u232_set_baud_rate(struct usb_serial *serial, int value)
{
unsigned int divisor;
int rc;
- divisor = MCT_U232_BAUD_RATE(value);
+ divisor = mct_u232_calculate_baud_rate(serial, value);
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,
@@ -230,7 +253,7 @@
WDR_TIMEOUT);
if (rc < 0)
err("Set BAUD RATE %d failed (error = %d)", value, rc);
- dbg("set_baud_rate: 0x%x", divisor);
+ dbg("set_baud_rate: value: %d, divisor: 0x%x", value, divisor);
return rc;
} /* mct_u232_set_baud_rate */
--
Stelian Pop <[EMAIL PROTECTED]>
|------------- Ingénieur Informatique Libre --------------|
| Alcôve - http://www.alcove.com - Tel: +33 1 49 22 68 00 |
|----------- Alcôve, l'informatique est libre ------------|
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
