Hi Samuel,
Today's linux-next merge of the mfd tree got a conflict in
drivers/mfd/Kconfig between commit 3f8ec5df11aa ("[media] mfd: Add header
files and Kbuild plumbing for SI476x MFD core") from the v4l-dvb tree and
commit ab85b120e692 ("mfd: Kconfig alphabetical re-ordering") from the
mfd tree.
I fixed it up (I think - see below) and can carry the fix as necessary
(no action is required).
diff --cc drivers/mfd/Kconfig
index b6bb6d5,2f3ce18..0000000
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@@ -977,68 -920,38 +920,51 @@@ config MFD_WL1273_COR
driver connects the radio-wl1273 V4L2 module and the wl1273
audio codec.
+config MFD_SI476X_CORE
+ tristate "Support for Silicon Laboratories 4761/64/68 AM/FM radio."
+ depends on I2C
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ This is the core driver for the SI476x series of AM/FM
+ radio. This MFD driver connects the radio-si476x V4L2 module
+ and the si476x audio codec.
+
+ To compile this driver as a module, choose M here: the
+ module will be called si476x-core.
+
- config MFD_OMAP_USB_HOST
- bool "Support OMAP USBHS core and TLL driver"
- depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
- default y
- help
- This is the core driver for the OAMP EHCI and OHCI drivers.
- This MFD driver does the required setup functionalities for
- OMAP USB Host drivers.
-
- config MFD_PM8XXX
- tristate
-
- config MFD_PM8921_CORE
- tristate "Qualcomm PM8921 PMIC chip"
- depends on MSM_SSBI
+ config MFD_LM3533
+ tristate "TI/National Semiconductor LM3533 Lighting Power chip"
+ depends on I2C
select MFD_CORE
- select MFD_PM8XXX
+ select REGMAP_I2C
+ depends on GENERIC_HARDIRQS
help
- If you say yes to this option, support will be included for the
- built-in PM8921 PMIC chip.
-
- This is required if your board has a PM8921 and uses its features,
- such as: MPPs, GPIOs, regulators, interrupts, and PWM.
-
- Say M here if you want to include support for PM8921 chip as a module.
- This will build a module called "pm8921-core".
+ Say yes here to enable support for National Semiconductor / TI
+ LM3533 Lighting Power chips.
- config MFD_PM8XXX_IRQ
- bool "Support for Qualcomm PM8xxx IRQ features"
- depends on MFD_PM8XXX
- default y if MFD_PM8XXX
- help
- This is the IRQ driver for Qualcomm PM 8xxx PMIC chips.
+ This driver provides common support for accessing the device;
+ additional drivers must be enabled in order to use the LED,
+ backlight or ambient-light-sensor functionality of the device.
- This is required to use certain other PM 8xxx features, such as GPIO
- and MPP.
+ config MFD_TIMBERDALE
+ tristate "Timberdale FPGA"
+ select MFD_CORE
+ depends on PCI && GPIOLIB
+ ---help---
+ This is the core driver for the timberdale FPGA. This device is a
+ multifunction device which exposes numerous platform devices.
- config TPS65911_COMPARATOR
- tristate
+ The timberdale FPGA can be found on the Intel Atom development board
+ for in-vehicle infontainment, called Russellville.
- config MFD_TPS65090
- bool "TPS65090 Power Management chips"
+ config MFD_TC3589X
+ bool "Toshiba TC35892 and variants"
depends on I2C=y && GENERIC_HARDIRQS
select MFD_CORE
- select REGMAP_I2C
- select REGMAP_IRQ
help
- If you say yes here you get support for the TPS65090 series of
- Power Management chips.
+ Support for the Toshiba TC35892 and variants I/O Expander.
+
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the
functionality of the device.
--
Cheers,
Stephen Rothwell s...@canb.auug.org.au
pgpeVk6LEvCgy.pgp
Description: PGP signature
