Hi Wolfram,

Any comments on this series? Could you consider merging these for 3.10?

Thanks.

On Thu, Mar 21, 2013 at 02:09:54PM +0200, Mika Westerberg wrote:
> From: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> 
> This makes the error handling much more simpler than open-coding everything
> and in addition makes the probe function smaller and tidier.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> Signed-off-by: Mika Westerberg <mika.westerb...@linux.intel.com>
> ---
>  drivers/i2c/busses/i2c-designware-platdrv.c |   73 
> ++++++++-------------------
>  1 file changed, 20 insertions(+), 53 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c 
> b/drivers/i2c/busses/i2c-designware-platdrv.c
> index 0ceb6e1..c19c4ce 100644
> --- a/drivers/i2c/busses/i2c-designware-platdrv.c
> +++ b/drivers/i2c/busses/i2c-designware-platdrv.c
> @@ -92,7 +92,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
>  {
>       struct dw_i2c_dev *dev;
>       struct i2c_adapter *adap;
> -     struct resource *mem, *ioarea;
> +     struct resource *mem;
>       int irq, r;
>  
>       /* NOTE: driver uses the static register mapping */
> @@ -108,32 +108,27 @@ static int dw_i2c_probe(struct platform_device *pdev)
>               return irq; /* -ENXIO */
>       }
>  
> -     ioarea = request_mem_region(mem->start, resource_size(mem),
> -                     pdev->name);
> -     if (!ioarea) {
> -             dev_err(&pdev->dev, "I2C region already claimed\n");
> -             return -EBUSY;
> -     }
> +     dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
> +     if (!dev)
> +             return -ENOMEM;
>  
> -     dev = kzalloc(sizeof(struct dw_i2c_dev), GFP_KERNEL);
> -     if (!dev) {
> -             r = -ENOMEM;
> -             goto err_release_region;
> +     dev->base = devm_ioremap_resource(&pdev->dev, mem);
> +     if (IS_ERR(dev->base)) {
> +             dev_err(&pdev->dev, "I2C region already claimed\n");
> +             return PTR_ERR(dev->base);
>       }
>  
>       init_completion(&dev->cmd_complete);
>       mutex_init(&dev->lock);
> -     dev->dev = get_device(&pdev->dev);
> +     dev->dev = &pdev->dev;
>       dev->irq = irq;
>       platform_set_drvdata(pdev, dev);
>  
> -     dev->clk = clk_get(&pdev->dev, NULL);
> +     dev->clk = devm_clk_get(&pdev->dev, NULL);
>       dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
>  
> -     if (IS_ERR(dev->clk)) {
> -             r = -ENODEV;
> -             goto err_free_mem;
> -     }
> +     if (IS_ERR(dev->clk))
> +             return PTR_ERR(dev->clk);
>       clk_prepare_enable(dev->clk);
>  
>       dev->functionality =
> @@ -146,13 +141,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
>       dev->master_cfg =  DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
>               DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST;
>  
> -     dev->base = ioremap(mem->start, resource_size(mem));
> -     if (dev->base == NULL) {
> -             dev_err(&pdev->dev, "failure mapping io resources\n");
> -             r = -EBUSY;
> -             goto err_unuse_clocks;
> -     }
> -
>       /* Try first if we can configure the device from ACPI */
>       r = dw_i2c_acpi_configure(pdev);
>       if (r) {
> @@ -164,13 +152,14 @@ static int dw_i2c_probe(struct platform_device *pdev)
>       }
>       r = i2c_dw_init(dev);
>       if (r)
> -             goto err_iounmap;
> +             return r;
>  
>       i2c_dw_disable_int(dev);
> -     r = request_irq(dev->irq, i2c_dw_isr, IRQF_SHARED, pdev->name, dev);
> +     r = devm_request_irq(&pdev->dev, dev->irq, i2c_dw_isr, IRQF_SHARED,
> +                     pdev->name, dev);
>       if (r) {
>               dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq);
> -             goto err_iounmap;
> +             return r;
>       }
>  
>       adap = &dev->adapter;
> @@ -187,57 +176,35 @@ static int dw_i2c_probe(struct platform_device *pdev)
>       r = i2c_add_numbered_adapter(adap);
>       if (r) {
>               dev_err(&pdev->dev, "failure adding adapter\n");
> -             goto err_free_irq;
> +             return r;
>       }
>       of_i2c_register_devices(adap);
>       acpi_i2c_register_devices(adap);
>  
> +     /* Increase reference counter */
> +     get_device(&pdev->dev);
> +
>       pm_runtime_set_active(&pdev->dev);
>       pm_runtime_enable(&pdev->dev);
>       pm_runtime_put(&pdev->dev);
>  
>       return 0;
> -
> -err_free_irq:
> -     free_irq(dev->irq, dev);
> -err_iounmap:
> -     iounmap(dev->base);
> -err_unuse_clocks:
> -     clk_disable_unprepare(dev->clk);
> -     clk_put(dev->clk);
> -     dev->clk = NULL;
> -err_free_mem:
> -     put_device(&pdev->dev);
> -     kfree(dev);
> -err_release_region:
> -     release_mem_region(mem->start, resource_size(mem));
> -
> -     return r;
>  }
>  
>  static int dw_i2c_remove(struct platform_device *pdev)
>  {
>       struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
> -     struct resource *mem;
>  
>       pm_runtime_get_sync(&pdev->dev);
>  
>       i2c_del_adapter(&dev->adapter);
>       put_device(&pdev->dev);
>  
> -     clk_disable_unprepare(dev->clk);
> -     clk_put(dev->clk);
> -     dev->clk = NULL;
> -
>       i2c_dw_disable(dev);
> -     free_irq(dev->irq, dev);
> -     kfree(dev);
>  
>       pm_runtime_put(&pdev->dev);
>       pm_runtime_disable(&pdev->dev);
>  
> -     mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -     release_mem_region(mem->start, resource_size(mem));
>       return 0;
>  }
>  
> -- 
> 1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to