On Saturday, March 30, 2013 05:10:26 PM Viresh Kumar wrote: > "Index" field of struct cpufreq_frequency_table was never index and isn't used > at all by cpufreq core. And is only useful for cpufreq drivers for their > personal use. > > Many people now a days blindly set it in ascending order with the assumption > that core is using it for some work. > > This patch renames it to "data" as that's what its purpose it. All users of > the > same are fixed too.
Sorry, I won't apply this. It changes too much stuff at a time and I'm not really sure if the change being made is necessary. Thanks, Rafael > Cc: Sekhar Nori <nsek...@ti.com> > Cc: Ben Dooks <ben-li...@fluff.org> > Cc: Kukjin Kim <kgene....@samsung.com> > Cc: Simon Horman <ho...@verge.net.au> > Cc: Magnus Damm <magnus.d...@gmail.com> > Cc: Ralf Baechle <r...@linux-mips.org> > Cc: Arnd Bergmann <a...@arndb.de> > Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org> > Cc: Paul Mackerras <pau...@samba.org> > Cc: Olof Johansson <o...@lixom.net> > Cc: Stephen Warren <swar...@wwwdotorg.org> > Cc: Srinidhi Kasagar <srinidhi.kasa...@stericsson.com> > Cc: Linus Walleij <linus.wall...@linaro.org> > Signed-off-by: Viresh Kumar <viresh.ku...@linaro.org> > --- > > This might not apply cleanly as it depends on a lot of work already being > done. > And so is pushed here: > > https://git.linaro.org/gitweb?p=people/vireshk/linux.git;a=shortlog;h=refs/heads/cpufreq-index-to-data > > Documentation/cpu-freq/cpu-drivers.txt | 10 +- > arch/arm/mach-davinci/da850.c | 8 +- > arch/arm/mach-s3c24xx/pll-s3c2410.c | 54 +++++----- > arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c | 54 +++++----- > arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c | 110 > ++++++++++----------- > arch/arm/mach-shmobile/clock-sh7372.c | 6 +- > arch/arm/plat-samsung/include/plat/cpu-freq-core.h | 2 +- > arch/mips/loongson/lemote-2f/clock.c | 2 +- > arch/powerpc/platforms/cell/cbe_cpufreq.c | 4 +- > drivers/base/power/opp.c | 4 +- > drivers/cpufreq/acpi-cpufreq.c | 6 +- > drivers/cpufreq/blackfin-cpufreq.c | 10 +- > drivers/cpufreq/e_powersaver.c | 8 +- > drivers/cpufreq/freq_table.c | 26 ++--- > drivers/cpufreq/ia64-acpi-cpufreq.c | 2 +- > drivers/cpufreq/imx-cpufreq.c | 4 +- > drivers/cpufreq/kirkwood-cpufreq.c | 2 +- > drivers/cpufreq/longhaul.c | 16 +-- > drivers/cpufreq/loongson2_cpufreq.c | 2 +- > drivers/cpufreq/p4-clockmod.c | 4 +- > drivers/cpufreq/pasemi-cpufreq.c | 4 +- > drivers/cpufreq/powernow-k6.c | 8 +- > drivers/cpufreq/powernow-k7.c | 16 +-- > drivers/cpufreq/powernow-k8.c | 18 ++-- > drivers/cpufreq/pxa2xx-cpufreq.c | 8 +- > drivers/cpufreq/pxa3xx-cpufreq.c | 4 +- > drivers/cpufreq/s3c2416-cpufreq.c | 2 +- > drivers/cpufreq/s3c64xx-cpufreq.c | 2 +- > drivers/cpufreq/sc520_freq.c | 2 +- > drivers/cpufreq/sparc-us2e-cpufreq.c | 12 +-- > drivers/cpufreq/sparc-us3-cpufreq.c | 8 +- > drivers/cpufreq/spear-cpufreq.c | 4 +- > drivers/cpufreq/speedstep-centrino.c | 8 +- > drivers/cpufreq/tegra-cpufreq.c | 2 +- > drivers/mfd/db8500-prcmu.c | 10 +- > drivers/sh/clk/core.c | 4 +- > include/linux/cpufreq.h | 2 +- > 37 files changed, 221 insertions(+), 227 deletions(-) > > diff --git a/Documentation/cpu-freq/cpu-drivers.txt > b/Documentation/cpu-freq/cpu-drivers.txt > index a3585ea..ead563a 100644 > --- a/Documentation/cpu-freq/cpu-drivers.txt > +++ b/Documentation/cpu-freq/cpu-drivers.txt > @@ -186,7 +186,7 @@ As most cpufreq processors only allow for being set to a > few specific > frequencies, a "frequency table" with some functions might assist in > some work of the processor driver. Such a "frequency table" consists > of an array of struct cpufreq_frequency_table entries, with any value in > -"index" you want to use, and the corresponding frequency in > +"data" you want to use, and the corresponding frequency in > "frequency". At the end of the table, you need to add a > cpufreq_frequency_table entry with frequency set to CPUFREQ_TABLE_END. And > if you want to skip one entry in the table, set the frequency to > @@ -214,10 +214,4 @@ int cpufreq_frequency_table_target(struct cpufreq_policy > *policy, > is the corresponding frequency table helper for the ->target > stage. Just pass the values to this function, and the unsigned int > index returns the number of the frequency table entry which contains > -the frequency the CPU shall be set to. PLEASE NOTE: This is not the > -"index" which is in this cpufreq_table_entry.index, but instead > -cpufreq_table[index]. So, the new frequency is > -cpufreq_table[index].frequency, and the value you stored into the > -frequency table "index" field is > -cpufreq_table[index].index. > - > +the frequency the CPU shall be set to. > diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c > index 0c4a26d..5b17f57 100644 > --- a/arch/arm/mach-davinci/da850.c > +++ b/arch/arm/mach-davinci/da850.c > @@ -958,7 +958,7 @@ static const struct da850_opp da850_opp_96 = { > > #define OPP(freq) \ > { \ > - .index = (unsigned int) &da850_opp_##freq, \ > + .data = (unsigned int) &da850_opp_##freq, \ > .frequency = freq * 1000, \ > } > > @@ -970,7 +970,7 @@ static struct cpufreq_frequency_table da850_freq_table[] > = { > OPP(200), > OPP(96), > { > - .index = 0, > + .data = 0, > .frequency = CPUFREQ_TABLE_END, > }, > }; > @@ -998,7 +998,7 @@ static int da850_set_voltage(unsigned int index) > if (!cvdd) > return -ENODEV; > > - opp = (struct da850_opp *) cpufreq_info.freq_table[index].index; > + opp = (struct da850_opp *) cpufreq_info.freq_table[index].data; > > return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max); > } > @@ -1079,7 +1079,7 @@ static int da850_set_pll0rate(struct clk *clk, unsigned > long index) > struct pll_data *pll = clk->pll_data; > int ret; > > - opp = (struct da850_opp *) cpufreq_info.freq_table[index].index; > + opp = (struct da850_opp *) cpufreq_info.freq_table[index].data; > prediv = opp->prediv; > mult = opp->mult; > postdiv = opp->postdiv; > diff --git a/arch/arm/mach-s3c24xx/pll-s3c2410.c > b/arch/arm/mach-s3c24xx/pll-s3c2410.c > index dcf3420..5051f74 100644 > --- a/arch/arm/mach-s3c24xx/pll-s3c2410.c > +++ b/arch/arm/mach-s3c24xx/pll-s3c2410.c > @@ -33,36 +33,36 @@ > #include <plat/cpu-freq-core.h> > > static struct cpufreq_frequency_table pll_vals_12MHz[] = { > - { .frequency = 34000000, .index = PLLVAL(82, 2, 3), }, > - { .frequency = 45000000, .index = PLLVAL(82, 1, 3), }, > - { .frequency = 51000000, .index = PLLVAL(161, 3, 3), }, > - { .frequency = 48000000, .index = PLLVAL(120, 2, 3), }, > - { .frequency = 56000000, .index = PLLVAL(142, 2, 3), }, > - { .frequency = 68000000, .index = PLLVAL(82, 2, 2), }, > - { .frequency = 79000000, .index = PLLVAL(71, 1, 2), }, > - { .frequency = 85000000, .index = PLLVAL(105, 2, 2), }, > - { .frequency = 90000000, .index = PLLVAL(112, 2, 2), }, > - { .frequency = 101000000, .index = PLLVAL(127, 2, 2), }, > - { .frequency = 113000000, .index = PLLVAL(105, 1, 2), }, > - { .frequency = 118000000, .index = PLLVAL(150, 2, 2), }, > - { .frequency = 124000000, .index = PLLVAL(116, 1, 2), }, > - { .frequency = 135000000, .index = PLLVAL(82, 2, 1), }, > - { .frequency = 147000000, .index = PLLVAL(90, 2, 1), }, > - { .frequency = 152000000, .index = PLLVAL(68, 1, 1), }, > - { .frequency = 158000000, .index = PLLVAL(71, 1, 1), }, > - { .frequency = 170000000, .index = PLLVAL(77, 1, 1), }, > - { .frequency = 180000000, .index = PLLVAL(82, 1, 1), }, > - { .frequency = 186000000, .index = PLLVAL(85, 1, 1), }, > - { .frequency = 192000000, .index = PLLVAL(88, 1, 1), }, > - { .frequency = 203000000, .index = PLLVAL(161, 3, 1), }, > + { .frequency = 34000000, .data = PLLVAL(82, 2, 3), }, > + { .frequency = 45000000, .data = PLLVAL(82, 1, 3), }, > + { .frequency = 51000000, .data = PLLVAL(161, 3, 3), }, > + { .frequency = 48000000, .data = PLLVAL(120, 2, 3), }, > + { .frequency = 56000000, .data = PLLVAL(142, 2, 3), }, > + { .frequency = 68000000, .data = PLLVAL(82, 2, 2), }, > + { .frequency = 79000000, .data = PLLVAL(71, 1, 2), }, > + { .frequency = 85000000, .data = PLLVAL(105, 2, 2), }, > + { .frequency = 90000000, .data = PLLVAL(112, 2, 2), }, > + { .frequency = 101000000, .data = PLLVAL(127, 2, 2), }, > + { .frequency = 113000000, .data = PLLVAL(105, 1, 2), }, > + { .frequency = 118000000, .data = PLLVAL(150, 2, 2), }, > + { .frequency = 124000000, .data = PLLVAL(116, 1, 2), }, > + { .frequency = 135000000, .data = PLLVAL(82, 2, 1), }, > + { .frequency = 147000000, .data = PLLVAL(90, 2, 1), }, > + { .frequency = 152000000, .data = PLLVAL(68, 1, 1), }, > + { .frequency = 158000000, .data = PLLVAL(71, 1, 1), }, > + { .frequency = 170000000, .data = PLLVAL(77, 1, 1), }, > + { .frequency = 180000000, .data = PLLVAL(82, 1, 1), }, > + { .frequency = 186000000, .data = PLLVAL(85, 1, 1), }, > + { .frequency = 192000000, .data = PLLVAL(88, 1, 1), }, > + { .frequency = 203000000, .data = PLLVAL(161, 3, 1), }, > > /* 2410A extras */ > > - { .frequency = 210000000, .index = PLLVAL(132, 2, 1), }, > - { .frequency = 226000000, .index = PLLVAL(105, 1, 1), }, > - { .frequency = 266000000, .index = PLLVAL(125, 1, 1), }, > - { .frequency = 268000000, .index = PLLVAL(126, 1, 1), }, > - { .frequency = 270000000, .index = PLLVAL(127, 1, 1), }, > + { .frequency = 210000000, .data = PLLVAL(132, 2, 1), }, > + { .frequency = 226000000, .data = PLLVAL(105, 1, 1), }, > + { .frequency = 266000000, .data = PLLVAL(125, 1, 1), }, > + { .frequency = 268000000, .data = PLLVAL(126, 1, 1), }, > + { .frequency = 270000000, .data = PLLVAL(127, 1, 1), }, > }; > > static int s3c2410_plls_add(struct device *dev, struct subsys_interface *sif) > diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c > b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c > index 6737817..63f86e7 100644 > --- a/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c > +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-12000000.c > @@ -21,33 +21,33 @@ > #include <plat/cpu-freq-core.h> > > static struct cpufreq_frequency_table s3c2440_plls_12[] __initdata = { > - { .frequency = 75000000, .index = PLLVAL(0x75, 3, 3), }, > /* FVco 600.000000 */ > - { .frequency = 80000000, .index = PLLVAL(0x98, 4, 3), }, > /* FVco 640.000000 */ > - { .frequency = 90000000, .index = PLLVAL(0x70, 2, 3), }, > /* FVco 720.000000 */ > - { .frequency = 100000000, .index = PLLVAL(0x5c, 1, 3), }, > /* FVco 800.000000 */ > - { .frequency = 110000000, .index = PLLVAL(0x66, 1, 3), }, > /* FVco 880.000000 */ > - { .frequency = 120000000, .index = PLLVAL(0x70, 1, 3), }, > /* FVco 960.000000 */ > - { .frequency = 150000000, .index = PLLVAL(0x75, 3, 2), }, > /* FVco 600.000000 */ > - { .frequency = 160000000, .index = PLLVAL(0x98, 4, 2), }, > /* FVco 640.000000 */ > - { .frequency = 170000000, .index = PLLVAL(0x4d, 1, 2), }, > /* FVco 680.000000 */ > - { .frequency = 180000000, .index = PLLVAL(0x70, 2, 2), }, > /* FVco 720.000000 */ > - { .frequency = 190000000, .index = PLLVAL(0x57, 1, 2), }, > /* FVco 760.000000 */ > - { .frequency = 200000000, .index = PLLVAL(0x5c, 1, 2), }, > /* FVco 800.000000 */ > - { .frequency = 210000000, .index = PLLVAL(0x84, 2, 2), }, > /* FVco 840.000000 */ > - { .frequency = 220000000, .index = PLLVAL(0x66, 1, 2), }, > /* FVco 880.000000 */ > - { .frequency = 230000000, .index = PLLVAL(0x6b, 1, 2), }, > /* FVco 920.000000 */ > - { .frequency = 240000000, .index = PLLVAL(0x70, 1, 2), }, > /* FVco 960.000000 */ > - { .frequency = 300000000, .index = PLLVAL(0x75, 3, 1), }, > /* FVco 600.000000 */ > - { .frequency = 310000000, .index = PLLVAL(0x93, 4, 1), }, > /* FVco 620.000000 */ > - { .frequency = 320000000, .index = PLLVAL(0x98, 4, 1), }, > /* FVco 640.000000 */ > - { .frequency = 330000000, .index = PLLVAL(0x66, 2, 1), }, > /* FVco 660.000000 */ > - { .frequency = 340000000, .index = PLLVAL(0x4d, 1, 1), }, > /* FVco 680.000000 */ > - { .frequency = 350000000, .index = PLLVAL(0xa7, 4, 1), }, > /* FVco 700.000000 */ > - { .frequency = 360000000, .index = PLLVAL(0x70, 2, 1), }, > /* FVco 720.000000 */ > - { .frequency = 370000000, .index = PLLVAL(0xb1, 4, 1), }, > /* FVco 740.000000 */ > - { .frequency = 380000000, .index = PLLVAL(0x57, 1, 1), }, > /* FVco 760.000000 */ > - { .frequency = 390000000, .index = PLLVAL(0x7a, 2, 1), }, > /* FVco 780.000000 */ > - { .frequency = 400000000, .index = PLLVAL(0x5c, 1, 1), }, > /* FVco 800.000000 */ > + { .frequency = 75000000, .data = PLLVAL(0x75, 3, 3), }, > /* FVco 600.000000 */ > + { .frequency = 80000000, .data = PLLVAL(0x98, 4, 3), }, > /* FVco 640.000000 */ > + { .frequency = 90000000, .data = PLLVAL(0x70, 2, 3), }, > /* FVco 720.000000 */ > + { .frequency = 100000000, .data = PLLVAL(0x5c, 1, 3), }, > /* FVco 800.000000 */ > + { .frequency = 110000000, .data = PLLVAL(0x66, 1, 3), }, > /* FVco 880.000000 */ > + { .frequency = 120000000, .data = PLLVAL(0x70, 1, 3), }, > /* FVco 960.000000 */ > + { .frequency = 150000000, .data = PLLVAL(0x75, 3, 2), }, > /* FVco 600.000000 */ > + { .frequency = 160000000, .data = PLLVAL(0x98, 4, 2), }, > /* FVco 640.000000 */ > + { .frequency = 170000000, .data = PLLVAL(0x4d, 1, 2), }, > /* FVco 680.000000 */ > + { .frequency = 180000000, .data = PLLVAL(0x70, 2, 2), }, > /* FVco 720.000000 */ > + { .frequency = 190000000, .data = PLLVAL(0x57, 1, 2), }, > /* FVco 760.000000 */ > + { .frequency = 200000000, .data = PLLVAL(0x5c, 1, 2), }, > /* FVco 800.000000 */ > + { .frequency = 210000000, .data = PLLVAL(0x84, 2, 2), }, > /* FVco 840.000000 */ > + { .frequency = 220000000, .data = PLLVAL(0x66, 1, 2), }, > /* FVco 880.000000 */ > + { .frequency = 230000000, .data = PLLVAL(0x6b, 1, 2), }, > /* FVco 920.000000 */ > + { .frequency = 240000000, .data = PLLVAL(0x70, 1, 2), }, > /* FVco 960.000000 */ > + { .frequency = 300000000, .data = PLLVAL(0x75, 3, 1), }, > /* FVco 600.000000 */ > + { .frequency = 310000000, .data = PLLVAL(0x93, 4, 1), }, > /* FVco 620.000000 */ > + { .frequency = 320000000, .data = PLLVAL(0x98, 4, 1), }, > /* FVco 640.000000 */ > + { .frequency = 330000000, .data = PLLVAL(0x66, 2, 1), }, > /* FVco 660.000000 */ > + { .frequency = 340000000, .data = PLLVAL(0x4d, 1, 1), }, > /* FVco 680.000000 */ > + { .frequency = 350000000, .data = PLLVAL(0xa7, 4, 1), }, > /* FVco 700.000000 */ > + { .frequency = 360000000, .data = PLLVAL(0x70, 2, 1), }, > /* FVco 720.000000 */ > + { .frequency = 370000000, .data = PLLVAL(0xb1, 4, 1), }, > /* FVco 740.000000 */ > + { .frequency = 380000000, .data = PLLVAL(0x57, 1, 1), }, > /* FVco 760.000000 */ > + { .frequency = 390000000, .data = PLLVAL(0x7a, 2, 1), }, > /* FVco 780.000000 */ > + { .frequency = 400000000, .data = PLLVAL(0x5c, 1, 1), }, > /* FVco 800.000000 */ > }; > > static int s3c2440_plls12_add(struct device *dev, struct subsys_interface > *sif) > diff --git a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c > b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c > index debfa10..7786b2e 100644 > --- a/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c > +++ b/arch/arm/mach-s3c24xx/pll-s3c2440-16934400.c > @@ -21,61 +21,61 @@ > #include <plat/cpu-freq-core.h> > > static struct cpufreq_frequency_table s3c2440_plls_169344[] __initdata = { > - { .frequency = 78019200, .index = PLLVAL(121, 5, 3), }, > /* FVco 624.153600 */ > - { .frequency = 84067200, .index = PLLVAL(131, 5, 3), }, > /* FVco 672.537600 */ > - { .frequency = 90115200, .index = PLLVAL(141, 5, 3), }, > /* FVco 720.921600 */ > - { .frequency = 96163200, .index = PLLVAL(151, 5, 3), }, > /* FVco 769.305600 */ > - { .frequency = 102135600, .index = PLLVAL(185, 6, 3), }, > /* FVco 817.084800 */ > - { .frequency = 108259200, .index = PLLVAL(171, 5, 3), }, > /* FVco 866.073600 */ > - { .frequency = 114307200, .index = PLLVAL(127, 3, 3), }, > /* FVco 914.457600 */ > - { .frequency = 120234240, .index = PLLVAL(134, 3, 3), }, > /* FVco 961.873920 */ > - { .frequency = 126161280, .index = PLLVAL(141, 3, 3), }, > /* FVco 1009.290240 */ > - { .frequency = 132088320, .index = PLLVAL(148, 3, 3), }, > /* FVco 1056.706560 */ > - { .frequency = 138015360, .index = PLLVAL(155, 3, 3), }, > /* FVco 1104.122880 */ > - { .frequency = 144789120, .index = PLLVAL(163, 3, 3), }, > /* FVco 1158.312960 */ > - { .frequency = 150100363, .index = PLLVAL(187, 9, 2), }, > /* FVco 600.401454 */ > - { .frequency = 156038400, .index = PLLVAL(121, 5, 2), }, > /* FVco 624.153600 */ > - { .frequency = 162086400, .index = PLLVAL(126, 5, 2), }, > /* FVco 648.345600 */ > - { .frequency = 168134400, .index = PLLVAL(131, 5, 2), }, > /* FVco 672.537600 */ > - { .frequency = 174048000, .index = PLLVAL(177, 7, 2), }, > /* FVco 696.192000 */ > - { .frequency = 180230400, .index = PLLVAL(141, 5, 2), }, > /* FVco 720.921600 */ > - { .frequency = 186278400, .index = PLLVAL(124, 4, 2), }, > /* FVco 745.113600 */ > - { .frequency = 192326400, .index = PLLVAL(151, 5, 2), }, > /* FVco 769.305600 */ > - { .frequency = 198132480, .index = PLLVAL(109, 3, 2), }, > /* FVco 792.529920 */ > - { .frequency = 204271200, .index = PLLVAL(185, 6, 2), }, > /* FVco 817.084800 */ > - { .frequency = 210268800, .index = PLLVAL(141, 4, 2), }, > /* FVco 841.075200 */ > - { .frequency = 216518400, .index = PLLVAL(171, 5, 2), }, > /* FVco 866.073600 */ > - { .frequency = 222264000, .index = PLLVAL(97, 2, 2), }, > /* FVco 889.056000 */ > - { .frequency = 228614400, .index = PLLVAL(127, 3, 2), }, > /* FVco 914.457600 */ > - { .frequency = 234259200, .index = PLLVAL(158, 4, 2), }, > /* FVco 937.036800 */ > - { .frequency = 240468480, .index = PLLVAL(134, 3, 2), }, > /* FVco 961.873920 */ > - { .frequency = 246960000, .index = PLLVAL(167, 4, 2), }, > /* FVco 987.840000 */ > - { .frequency = 252322560, .index = PLLVAL(141, 3, 2), }, > /* FVco 1009.290240 */ > - { .frequency = 258249600, .index = PLLVAL(114, 2, 2), }, > /* FVco 1032.998400 */ > - { .frequency = 264176640, .index = PLLVAL(148, 3, 2), }, > /* FVco 1056.706560 */ > - { .frequency = 270950400, .index = PLLVAL(120, 2, 2), }, > /* FVco 1083.801600 */ > - { .frequency = 276030720, .index = PLLVAL(155, 3, 2), }, > /* FVco 1104.122880 */ > - { .frequency = 282240000, .index = PLLVAL(92, 1, 2), }, > /* FVco 1128.960000 */ > - { .frequency = 289578240, .index = PLLVAL(163, 3, 2), }, > /* FVco 1158.312960 */ > - { .frequency = 294235200, .index = PLLVAL(131, 2, 2), }, > /* FVco 1176.940800 */ > - { .frequency = 300200727, .index = PLLVAL(187, 9, 1), }, > /* FVco 600.401454 */ > - { .frequency = 306358690, .index = PLLVAL(191, 9, 1), }, > /* FVco 612.717380 */ > - { .frequency = 312076800, .index = PLLVAL(121, 5, 1), }, > /* FVco 624.153600 */ > - { .frequency = 318366720, .index = PLLVAL(86, 3, 1), }, > /* FVco 636.733440 */ > - { .frequency = 324172800, .index = PLLVAL(126, 5, 1), }, > /* FVco 648.345600 */ > - { .frequency = 330220800, .index = PLLVAL(109, 4, 1), }, > /* FVco 660.441600 */ > - { .frequency = 336268800, .index = PLLVAL(131, 5, 1), }, > /* FVco 672.537600 */ > - { .frequency = 342074880, .index = PLLVAL(93, 3, 1), }, > /* FVco 684.149760 */ > - { .frequency = 348096000, .index = PLLVAL(177, 7, 1), }, > /* FVco 696.192000 */ > - { .frequency = 355622400, .index = PLLVAL(118, 4, 1), }, > /* FVco 711.244800 */ > - { .frequency = 360460800, .index = PLLVAL(141, 5, 1), }, > /* FVco 720.921600 */ > - { .frequency = 366206400, .index = PLLVAL(165, 6, 1), }, > /* FVco 732.412800 */ > - { .frequency = 372556800, .index = PLLVAL(124, 4, 1), }, > /* FVco 745.113600 */ > - { .frequency = 378201600, .index = PLLVAL(126, 4, 1), }, > /* FVco 756.403200 */ > - { .frequency = 384652800, .index = PLLVAL(151, 5, 1), }, > /* FVco 769.305600 */ > - { .frequency = 391608000, .index = PLLVAL(177, 6, 1), }, > /* FVco 783.216000 */ > - { .frequency = 396264960, .index = PLLVAL(109, 3, 1), }, > /* FVco 792.529920 */ > - { .frequency = 402192000, .index = PLLVAL(87, 2, 1), }, > /* FVco 804.384000 */ > + { .frequency = 78019200, .data = PLLVAL(121, 5, 3), }, > /* FVco 624.153600 */ > + { .frequency = 84067200, .data = PLLVAL(131, 5, 3), }, > /* FVco 672.537600 */ > + { .frequency = 90115200, .data = PLLVAL(141, 5, 3), }, > /* FVco 720.921600 */ > + { .frequency = 96163200, .data = PLLVAL(151, 5, 3), }, > /* FVco 769.305600 */ > + { .frequency = 102135600, .data = PLLVAL(185, 6, 3), }, > /* FVco 817.084800 */ > + { .frequency = 108259200, .data = PLLVAL(171, 5, 3), }, > /* FVco 866.073600 */ > + { .frequency = 114307200, .data = PLLVAL(127, 3, 3), }, > /* FVco 914.457600 */ > + { .frequency = 120234240, .data = PLLVAL(134, 3, 3), }, > /* FVco 961.873920 */ > + { .frequency = 126161280, .data = PLLVAL(141, 3, 3), }, > /* FVco 1009.290240 */ > + { .frequency = 132088320, .data = PLLVAL(148, 3, 3), }, > /* FVco 1056.706560 */ > + { .frequency = 138015360, .data = PLLVAL(155, 3, 3), }, > /* FVco 1104.122880 */ > + { .frequency = 144789120, .data = PLLVAL(163, 3, 3), }, > /* FVco 1158.312960 */ > + { .frequency = 150100363, .data = PLLVAL(187, 9, 2), }, > /* FVco 600.401454 */ > + { .frequency = 156038400, .data = PLLVAL(121, 5, 2), }, > /* FVco 624.153600 */ > + { .frequency = 162086400, .data = PLLVAL(126, 5, 2), }, > /* FVco 648.345600 */ > + { .frequency = 168134400, .data = PLLVAL(131, 5, 2), }, > /* FVco 672.537600 */ > + { .frequency = 174048000, .data = PLLVAL(177, 7, 2), }, > /* FVco 696.192000 */ > + { .frequency = 180230400, .data = PLLVAL(141, 5, 2), }, > /* FVco 720.921600 */ > + { .frequency = 186278400, .data = PLLVAL(124, 4, 2), }, > /* FVco 745.113600 */ > + { .frequency = 192326400, .data = PLLVAL(151, 5, 2), }, > /* FVco 769.305600 */ > + { .frequency = 198132480, .data = PLLVAL(109, 3, 2), }, > /* FVco 792.529920 */ > + { .frequency = 204271200, .data = PLLVAL(185, 6, 2), }, > /* FVco 817.084800 */ > + { .frequency = 210268800, .data = PLLVAL(141, 4, 2), }, > /* FVco 841.075200 */ > + { .frequency = 216518400, .data = PLLVAL(171, 5, 2), }, > /* FVco 866.073600 */ > + { .frequency = 222264000, .data = PLLVAL(97, 2, 2), }, > /* FVco 889.056000 */ > + { .frequency = 228614400, .data = PLLVAL(127, 3, 2), }, > /* FVco 914.457600 */ > + { .frequency = 234259200, .data = PLLVAL(158, 4, 2), }, > /* FVco 937.036800 */ > + { .frequency = 240468480, .data = PLLVAL(134, 3, 2), }, > /* FVco 961.873920 */ > + { .frequency = 246960000, .data = PLLVAL(167, 4, 2), }, > /* FVco 987.840000 */ > + { .frequency = 252322560, .data = PLLVAL(141, 3, 2), }, > /* FVco 1009.290240 */ > + { .frequency = 258249600, .data = PLLVAL(114, 2, 2), }, > /* FVco 1032.998400 */ > + { .frequency = 264176640, .data = PLLVAL(148, 3, 2), }, > /* FVco 1056.706560 */ > + { .frequency = 270950400, .data = PLLVAL(120, 2, 2), }, > /* FVco 1083.801600 */ > + { .frequency = 276030720, .data = PLLVAL(155, 3, 2), }, > /* FVco 1104.122880 */ > + { .frequency = 282240000, .data = PLLVAL(92, 1, 2), }, > /* FVco 1128.960000 */ > + { .frequency = 289578240, .data = PLLVAL(163, 3, 2), }, > /* FVco 1158.312960 */ > + { .frequency = 294235200, .data = PLLVAL(131, 2, 2), }, > /* FVco 1176.940800 */ > + { .frequency = 300200727, .data = PLLVAL(187, 9, 1), }, > /* FVco 600.401454 */ > + { .frequency = 306358690, .data = PLLVAL(191, 9, 1), }, > /* FVco 612.717380 */ > + { .frequency = 312076800, .data = PLLVAL(121, 5, 1), }, > /* FVco 624.153600 */ > + { .frequency = 318366720, .data = PLLVAL(86, 3, 1), }, > /* FVco 636.733440 */ > + { .frequency = 324172800, .data = PLLVAL(126, 5, 1), }, > /* FVco 648.345600 */ > + { .frequency = 330220800, .data = PLLVAL(109, 4, 1), }, > /* FVco 660.441600 */ > + { .frequency = 336268800, .data = PLLVAL(131, 5, 1), }, > /* FVco 672.537600 */ > + { .frequency = 342074880, .data = PLLVAL(93, 3, 1), }, > /* FVco 684.149760 */ > + { .frequency = 348096000, .data = PLLVAL(177, 7, 1), }, > /* FVco 696.192000 */ > + { .frequency = 355622400, .data = PLLVAL(118, 4, 1), }, > /* FVco 711.244800 */ > + { .frequency = 360460800, .data = PLLVAL(141, 5, 1), }, > /* FVco 720.921600 */ > + { .frequency = 366206400, .data = PLLVAL(165, 6, 1), }, > /* FVco 732.412800 */ > + { .frequency = 372556800, .data = PLLVAL(124, 4, 1), }, > /* FVco 745.113600 */ > + { .frequency = 378201600, .data = PLLVAL(126, 4, 1), }, > /* FVco 756.403200 */ > + { .frequency = 384652800, .data = PLLVAL(151, 5, 1), }, > /* FVco 769.305600 */ > + { .frequency = 391608000, .data = PLLVAL(177, 6, 1), }, > /* FVco 783.216000 */ > + { .frequency = 396264960, .data = PLLVAL(109, 3, 1), }, > /* FVco 792.529920 */ > + { .frequency = 402192000, .data = PLLVAL(87, 2, 1), }, > /* FVco 804.384000 */ > }; > > static int s3c2440_plls169344_add(struct device *dev, > diff --git a/arch/arm/mach-shmobile/clock-sh7372.c > b/arch/arm/mach-shmobile/clock-sh7372.c > index 45d21fe..1981c6d 100644 > --- a/arch/arm/mach-shmobile/clock-sh7372.c > +++ b/arch/arm/mach-shmobile/clock-sh7372.c > @@ -171,15 +171,15 @@ static void pllc2_table_rebuild(struct clk *clk) > /* Initialise PLLC2 frequency table */ > for (i = 0; i < ARRAY_SIZE(pllc2_freq_table) - 2; i++) { > pllc2_freq_table[i].frequency = clk->parent->rate * (i + 20) * > 2; > - pllc2_freq_table[i].index = i; > + pllc2_freq_table[i].data = i; > } > > /* This is a special entry - switching PLL off makes it a repeater */ > pllc2_freq_table[i].frequency = clk->parent->rate; > - pllc2_freq_table[i].index = i; > + pllc2_freq_table[i].data = i; > > pllc2_freq_table[++i].frequency = CPUFREQ_TABLE_END; > - pllc2_freq_table[i].index = i; > + pllc2_freq_table[i].data = i; > } > > static unsigned long pllc2_recalc(struct clk *clk) > diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h > b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h > index d7e1715..126fce4 100644 > --- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h > +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h > @@ -285,7 +285,7 @@ static inline int s3c_cpufreq_addfreq(struct > cpufreq_frequency_table *table, > s3c_freq_dbg("%s: { %d = %u kHz }\n", > __func__, index, freq); > > - table[index].index = index; > + table[index].data = index; > table[index].frequency = freq; > } > > diff --git a/arch/mips/loongson/lemote-2f/clock.c > b/arch/mips/loongson/lemote-2f/clock.c > index bc739d4..06edc17 100644 > --- a/arch/mips/loongson/lemote-2f/clock.c > +++ b/arch/mips/loongson/lemote-2f/clock.c > @@ -121,7 +121,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate) > clk->rate = rate; > > regval = LOONGSON_CHIPCFG0; > - regval = (regval & ~0x7) | (loongson2_clockmod_table[i].index - 1); > + regval = (regval & ~0x7) | (loongson2_clockmod_table[i].data - 1); > LOONGSON_CHIPCFG0 = regval; > > return ret; > diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c > b/arch/powerpc/platforms/cell/cbe_cpufreq.c > index 718c6a3..1d693c0 100644 > --- a/arch/powerpc/platforms/cell/cbe_cpufreq.c > +++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c > @@ -105,7 +105,7 @@ static int cbe_cpufreq_cpu_init(struct cpufreq_policy > *policy) > > /* initialize frequency table */ > for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { > - cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; > + cbe_freqs[i].frequency = max_freq / cbe_freqs[i].data; > pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); > } > > @@ -164,7 +164,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy > *policy, > "1/%d of max frequency\n", > policy->cpu, > cbe_freqs[cbe_pmode_new].frequency, > - cbe_freqs[cbe_pmode_new].index); > + cbe_freqs[cbe_pmode_new].data); > > rc = set_pmode(policy->cpu, cbe_pmode_new); > > diff --git a/drivers/base/power/opp.c b/drivers/base/power/opp.c > index 32ee0fc..08f9fb1 100644 > --- a/drivers/base/power/opp.c > +++ b/drivers/base/power/opp.c > @@ -647,14 +647,14 @@ int opp_init_cpufreq_table(struct device *dev, > > list_for_each_entry(opp, &dev_opp->opp_list, node) { > if (opp->available) { > - freq_table[i].index = i; > + freq_table[i].data = i; > freq_table[i].frequency = opp->rate / 1000; > i++; > } > } > mutex_unlock(&dev_opp_list_lock); > > - freq_table[i].index = i; > + freq_table[i].data = i; > freq_table[i].frequency = CPUFREQ_TABLE_END; > > *table = &freq_table[0]; > diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c > index 11b8b4b..ce28c34 100644 > --- a/drivers/cpufreq/acpi-cpufreq.c > +++ b/drivers/cpufreq/acpi-cpufreq.c > @@ -232,7 +232,7 @@ static unsigned extract_msr(u32 msr, struct > acpi_cpufreq_data *data) > perf = data->acpi_data; > > for (i = 0; data->freq_table[i].frequency != CPUFREQ_TABLE_END; i++) { > - if (msr == perf->states[data->freq_table[i].index].status) > + if (msr == perf->states[data->freq_table[i].data].status) > return data->freq_table[i].frequency; > } > return data->freq_table[0].frequency; > @@ -442,7 +442,7 @@ static int acpi_cpufreq_target(struct cpufreq_policy > *policy, > goto out; > } > > - next_perf_state = data->freq_table[next_state].index; > + next_perf_state = data->freq_table[next_state].data; > if (perf->state == next_perf_state) { > if (unlikely(data->resume)) { > pr_debug("Called after resume, resetting to P%d\n", > @@ -811,7 +811,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy > *policy) > data->freq_table[valid_states-1].frequency / 1000) > continue; > > - data->freq_table[valid_states].index = i; > + data->freq_table[valid_states].data = i; > data->freq_table[valid_states].frequency = > perf->states[i].core_frequency * 1000; > valid_states++; > diff --git a/drivers/cpufreq/blackfin-cpufreq.c > b/drivers/cpufreq/blackfin-cpufreq.c > index 995511e80..03857f1 100644 > --- a/drivers/cpufreq/blackfin-cpufreq.c > +++ b/drivers/cpufreq/blackfin-cpufreq.c > @@ -20,23 +20,23 @@ > > > /* this is the table of CCLK frequencies, in Hz */ > -/* .index is the entry in the auxiliary dpm_state_table[] */ > +/* .data is the entry in the auxiliary dpm_state_table[] */ > static struct cpufreq_frequency_table bfin_freq_table[] = { > { > .frequency = CPUFREQ_TABLE_END, > - .index = 0, > + .data = 0, > }, > { > .frequency = CPUFREQ_TABLE_END, > - .index = 1, > + .data = 1, > }, > { > .frequency = CPUFREQ_TABLE_END, > - .index = 2, > + .data = 2, > }, > { > .frequency = CPUFREQ_TABLE_END, > - .index = 0, > + .data = 0, > }, > }; > > diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c > index 37380fb..7cc03b7 100644 > --- a/drivers/cpufreq/e_powersaver.c > +++ b/drivers/cpufreq/e_powersaver.c > @@ -188,7 +188,7 @@ static int eps_target(struct cpufreq_policy *policy, > } > > /* Make frequency transition */ > - dest_state = centaur->freq_table[newstate].index & 0xffff; > + dest_state = centaur->freq_table[newstate].data & 0xffff; > ret = eps_set_state(centaur, policy, dest_state); > if (ret) > printk(KERN_ERR "eps: Timeout!\n"); > @@ -380,9 +380,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy) > f_table = ¢aur->freq_table[0]; > if (brand != EPS_BRAND_C7M) { > f_table[0].frequency = fsb * min_multiplier; > - f_table[0].index = (min_multiplier << 8) | min_voltage; > + f_table[0].data = (min_multiplier << 8) | min_voltage; > f_table[1].frequency = fsb * max_multiplier; > - f_table[1].index = (max_multiplier << 8) | max_voltage; > + f_table[1].data = (max_multiplier << 8) | max_voltage; > f_table[2].frequency = CPUFREQ_TABLE_END; > } else { > k = 0; > @@ -391,7 +391,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy) > for (i = min_multiplier; i <= max_multiplier; i++) { > voltage = (k * step) / 256 + min_voltage; > f_table[k].frequency = fsb * i; > - f_table[k].index = (i << 8) | voltage; > + f_table[k].data = (i << 8) | voltage; > k++; > } > f_table[k].frequency = CPUFREQ_TABLE_END; > diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c > index d7a7966..c17a605 100644 > --- a/drivers/cpufreq/freq_table.c > +++ b/drivers/cpufreq/freq_table.c > @@ -34,8 +34,8 @@ int cpufreq_frequency_table_cpuinfo(struct cpufreq_policy > *policy, > > continue; > } > - pr_debug("table entry %u: %u kHz, %u index\n", > - i, freq, table[i].index); > + pr_debug("table entry %u: %u kHz, %u data\n", > + i, freq, table[i].data); > if (freq < min_freq) > min_freq = freq; > if (freq > max_freq) > @@ -97,11 +97,11 @@ int cpufreq_frequency_table_target(struct cpufreq_policy > *policy, > unsigned int *index) > { > struct cpufreq_frequency_table optimal = { > - .index = ~0, > + .data = ~0, > .frequency = 0, > }; > struct cpufreq_frequency_table suboptimal = { > - .index = ~0, > + .data = ~0, > .frequency = 0, > }; > unsigned int i; > @@ -129,12 +129,12 @@ int cpufreq_frequency_table_target(struct > cpufreq_policy *policy, > if (freq <= target_freq) { > if (freq >= optimal.frequency) { > optimal.frequency = freq; > - optimal.index = i; > + optimal.data = i; > } > } else { > if (freq <= suboptimal.frequency) { > suboptimal.frequency = freq; > - suboptimal.index = i; > + suboptimal.data = i; > } > } > break; > @@ -142,26 +142,26 @@ int cpufreq_frequency_table_target(struct > cpufreq_policy *policy, > if (freq >= target_freq) { > if (freq <= optimal.frequency) { > optimal.frequency = freq; > - optimal.index = i; > + optimal.data = i; > } > } else { > if (freq >= suboptimal.frequency) { > suboptimal.frequency = freq; > - suboptimal.index = i; > + suboptimal.data = i; > } > } > break; > } > } > - if (optimal.index > i) { > - if (suboptimal.index > i) > + if (optimal.data > i) { > + if (suboptimal.data > i) > return -EINVAL; > - *index = suboptimal.index; > + *index = suboptimal.data; > } else > - *index = optimal.index; > + *index = optimal.data; > > pr_debug("target is %u (%u kHz, %u)\n", *index, table[*index].frequency, > - table[*index].index); > + table[*index].data); > > return 0; > } > diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c > b/drivers/cpufreq/ia64-acpi-cpufreq.c > index c0075db..b8e8536 100644 > --- a/drivers/cpufreq/ia64-acpi-cpufreq.c > +++ b/drivers/cpufreq/ia64-acpi-cpufreq.c > @@ -326,7 +326,7 @@ acpi_cpufreq_cpu_init ( > /* table init */ > for (i = 0; i <= data->acpi_data.state_count; i++) > { > - data->freq_table[i].index = i; > + data->freq_table[i].data = i; > if (i < data->acpi_data.state_count) { > data->freq_table[i].frequency = > data->acpi_data.states[i].core_frequency * 1000; > diff --git a/drivers/cpufreq/imx-cpufreq.c b/drivers/cpufreq/imx-cpufreq.c > index 20250b4..3017118 100644 > --- a/drivers/cpufreq/imx-cpufreq.c > +++ b/drivers/cpufreq/imx-cpufreq.c > @@ -129,7 +129,7 @@ static int mxc_cpufreq_init(struct cpufreq_policy *policy) > } > > for (i = 0; i < cpu_op_nr; i++) { > - imx_freq_table[i].index = i; > + imx_freq_table[i].data = i; > imx_freq_table[i].frequency = cpu_op_tbl[i].cpu_rate / 1000; > > if ((cpu_op_tbl[i].cpu_rate / 1000) < cpu_freq_khz_min) > @@ -139,7 +139,7 @@ static int mxc_cpufreq_init(struct cpufreq_policy *policy) > cpu_freq_khz_max = cpu_op_tbl[i].cpu_rate / 1000; > } > > - imx_freq_table[i].index = i; > + imx_freq_table[i].data = i; > imx_freq_table[i].frequency = CPUFREQ_TABLE_END; > > policy->cur = clk_get_rate(cpu_clk) / 1000; > diff --git a/drivers/cpufreq/kirkwood-cpufreq.c > b/drivers/cpufreq/kirkwood-cpufreq.c > index d36ea8d..7fdc677 100644 > --- a/drivers/cpufreq/kirkwood-cpufreq.c > +++ b/drivers/cpufreq/kirkwood-cpufreq.c > @@ -59,7 +59,7 @@ static void kirkwood_cpufreq_set_cpu_state(struct > cpufreq_policy *policy, > unsigned int index) > { > struct cpufreq_freqs freqs; > - unsigned int state = kirkwood_freq_table[index].index; > + unsigned int state = kirkwood_freq_table[index].data; > unsigned long reg; > > freqs.old = kirkwood_cpufreq_get_cpu_frequency(0); > diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c > index b448638..95e56bd 100644 > --- a/drivers/cpufreq/longhaul.c > +++ b/drivers/cpufreq/longhaul.c > @@ -254,7 +254,7 @@ static void longhaul_setstate(struct cpufreq_policy > *policy, > u32 bm_timeout = 1000; > unsigned int dir = 0; > > - mults_index = longhaul_table[table_index].index; > + mults_index = longhaul_table[table_index].data; > /* Safety precautions */ > mult = mults[mults_index & 0x1f]; > if (mult == -1) > @@ -487,7 +487,7 @@ static int __cpuinit longhaul_get_ranges(void) > if (ratio > maxmult || ratio < minmult) > continue; > longhaul_table[k].frequency = calc_speed(ratio); > - longhaul_table[k].index = j; > + longhaul_table[k].data = j; > k++; > } > if (k <= 1) { > @@ -508,8 +508,8 @@ static int __cpuinit longhaul_get_ranges(void) > if (min_i != j) { > swap(longhaul_table[j].frequency, > longhaul_table[min_i].frequency); > - swap(longhaul_table[j].index, > - longhaul_table[min_i].index); > + swap(longhaul_table[j].data, > + longhaul_table[min_i].data); > } > } > > @@ -517,7 +517,7 @@ static int __cpuinit longhaul_get_ranges(void) > > /* Find index we are running on */ > for (j = 0; j < k; j++) { > - if (mults[longhaul_table[j].index & 0x1f] == mult) { > + if (mults[longhaul_table[j].data & 0x1f] == mult) { > longhaul_index = j; > break; > } > @@ -613,7 +613,7 @@ static void __cpuinit longhaul_setup_voltagescaling(void) > pos = (speed - min_vid_speed) / kHz_step + minvid.pos; > else > pos = minvid.pos; > - longhaul_table[j].index |= mV_vrm_table[pos] << 8; > + longhaul_table[j].data |= mV_vrm_table[pos] << 8; > vid = vrm_mV_table[mV_vrm_table[pos]]; > printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", > speed, j, vid.mV); > @@ -656,12 +656,12 @@ static int longhaul_target(struct cpufreq_policy > *policy, > * this in hardware, C3 is old and we need to do this > * in software. */ > i = longhaul_index; > - current_vid = (longhaul_table[longhaul_index].index >> 8); > + current_vid = (longhaul_table[longhaul_index].data >> 8); > current_vid &= 0x1f; > if (table_index > longhaul_index) > dir = 1; > while (i != table_index) { > - vid = (longhaul_table[i].index >> 8) & 0x1f; > + vid = (longhaul_table[i].data >> 8) & 0x1f; > if (vid != current_vid) { > longhaul_setstate(policy, i); > current_vid = vid; > diff --git a/drivers/cpufreq/loongson2_cpufreq.c > b/drivers/cpufreq/loongson2_cpufreq.c > index 8488957..d9ae287 100644 > --- a/drivers/cpufreq/loongson2_cpufreq.c > +++ b/drivers/cpufreq/loongson2_cpufreq.c > @@ -71,7 +71,7 @@ static int loongson2_cpufreq_target(struct cpufreq_policy > *policy, > > freq = > ((cpu_clock_freq / 1000) * > - loongson2_clockmod_table[newstate].index) / 8; > + loongson2_clockmod_table[newstate].data) / 8; > if (freq < policy->min || freq > policy->max) > return -EINVAL; > > diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c > index 421ef37..6d69901 100644 > --- a/drivers/cpufreq/p4-clockmod.c > +++ b/drivers/cpufreq/p4-clockmod.c > @@ -118,7 +118,7 @@ static int cpufreq_p4_target(struct cpufreq_policy > *policy, > return -EINVAL; > > freqs.old = cpufreq_p4_get(policy->cpu); > - freqs.new = stock_freq * p4clockmod_table[newstate].index / 8; > + freqs.new = stock_freq * p4clockmod_table[newstate].data / 8; > > if (freqs.new == freqs.old) > return 0; > @@ -131,7 +131,7 @@ static int cpufreq_p4_target(struct cpufreq_policy > *policy, > * Developer's Manual, Volume 3 > */ > for_each_cpu(i, policy->cpus) > - cpufreq_p4_setdc(i, p4clockmod_table[newstate].index); > + cpufreq_p4_setdc(i, p4clockmod_table[newstate].data); > > /* notifiers */ > cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE); > diff --git a/drivers/cpufreq/pasemi-cpufreq.c > b/drivers/cpufreq/pasemi-cpufreq.c > index be1e795..3786e2b 100644 > --- a/drivers/cpufreq/pasemi-cpufreq.c > +++ b/drivers/cpufreq/pasemi-cpufreq.c > @@ -204,7 +204,7 @@ static int pas_cpufreq_cpu_init(struct cpufreq_policy > *policy) > > /* initialize frequency table */ > for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { > - pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].index) * > 100000; > + pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].data) * > 100000; > pr_debug("%d: %d\n", i, pas_freqs[i].frequency); > } > > @@ -280,7 +280,7 @@ static int pas_cpufreq_target(struct cpufreq_policy > *policy, > pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max > frequency\n", > policy->cpu, > pas_freqs[pas_astate_new].frequency, > - pas_freqs[pas_astate_new].index); > + pas_freqs[pas_astate_new].data); > > current_astate = pas_astate_new; > > diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c > index ea0222a..3b9f74d 100644 > --- a/drivers/cpufreq/powernow-k6.c > +++ b/drivers/cpufreq/powernow-k6.c > @@ -58,7 +58,7 @@ static int powernow_k6_get_cpu_multiplier(void) > msrval = POWERNOW_IOPORT + 0x0; > wrmsr(MSR_K6_EPMR, msrval, 0); /* disable it again */ > > - return clock_ratio[(invalue >> 5)&7].index; > + return clock_ratio[(invalue >> 5)&7].data; > } > > > @@ -75,13 +75,13 @@ static void powernow_k6_set_state(struct cpufreq_policy > *policy, > unsigned long msrval; > struct cpufreq_freqs freqs; > > - if (clock_ratio[best_i].index > max_multiplier) { > + if (clock_ratio[best_i].data > max_multiplier) { > printk(KERN_ERR PFX "invalid target frequency\n"); > return; > } > > freqs.old = busfreq * powernow_k6_get_cpu_multiplier(); > - freqs.new = busfreq * clock_ratio[best_i].index; > + freqs.new = busfreq * clock_ratio[best_i].data; > > cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE); > > @@ -156,7 +156,7 @@ static int powernow_k6_cpu_init(struct cpufreq_policy > *policy) > > /* table init */ > for (i = 0; (clock_ratio[i].frequency != CPUFREQ_TABLE_END); i++) { > - f = clock_ratio[i].index; > + f = clock_ratio[i].data; > if (f > max_multiplier) > clock_ratio[i].frequency = CPUFREQ_ENTRY_INVALID; > else > diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c > index 53888da..cffe828 100644 > --- a/drivers/cpufreq/powernow-k7.c > +++ b/drivers/cpufreq/powernow-k7.c > @@ -186,7 +186,7 @@ static int get_ranges(unsigned char *pst) > fid = *pst++; > > powernow_table[j].frequency = (fsb * fid_codes[fid]) / 10; > - powernow_table[j].index = fid; /* lower 8 bits */ > + powernow_table[j].data = fid; /* lower 8 bits */ > > speed = powernow_table[j].frequency; > > @@ -203,7 +203,7 @@ static int get_ranges(unsigned char *pst) > maximum_speed = speed; > > vid = *pst++; > - powernow_table[j].index |= (vid << 8); /* upper 8 bits */ > + powernow_table[j].data |= (vid << 8); /* upper 8 bits */ > > pr_debug(" FID: 0x%x (%d.%dx [%dMHz]) " > "VID: 0x%x (%d.%03dV)\n", fid, fid_codes[fid] / 10, > @@ -212,7 +212,7 @@ static int get_ranges(unsigned char *pst) > mobile_vid_table[vid]%1000); > } > powernow_table[number_scales].frequency = CPUFREQ_TABLE_END; > - powernow_table[number_scales].index = 0; > + powernow_table[number_scales].data = 0; > > return 0; > } > @@ -260,8 +260,8 @@ static void change_speed(struct cpufreq_policy *policy, > unsigned int index) > * vid are the upper 8 bits. > */ > > - fid = powernow_table[index].index & 0xFF; > - vid = (powernow_table[index].index & 0xFF00) >> 8; > + fid = powernow_table[index].data & 0xFF; > + vid = (powernow_table[index].data & 0xFF00) >> 8; > > rdmsrl(MSR_K7_FID_VID_STATUS, fidvidstatus.val); > cfid = fidvidstatus.bits.CFID; > @@ -373,8 +373,8 @@ static int powernow_acpi_init(void) > fid = pc.bits.fid; > > powernow_table[i].frequency = fsb * fid_codes[fid] / 10; > - powernow_table[i].index = fid; /* lower 8 bits */ > - powernow_table[i].index |= (vid << 8); /* upper 8 bits */ > + powernow_table[i].data = fid; /* lower 8 bits */ > + powernow_table[i].data |= (vid << 8); /* upper 8 bits */ > > speed = powernow_table[i].frequency; > speed_mhz = speed / 1000; > @@ -417,7 +417,7 @@ static int powernow_acpi_init(void) > } > > powernow_table[i].frequency = CPUFREQ_TABLE_END; > - powernow_table[i].index = 0; > + powernow_table[i].data = 0; > > /* notify BIOS that we exist */ > acpi_processor_notify_smm(THIS_MODULE); > diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c > index b828efe..6865266 100644 > --- a/drivers/cpufreq/powernow-k8.c > +++ b/drivers/cpufreq/powernow-k8.c > @@ -584,9 +584,9 @@ static void print_basics(struct powernow_k8_data *data) > CPUFREQ_ENTRY_INVALID) { > printk(KERN_INFO PFX > "fid 0x%x (%d MHz), vid 0x%x\n", > - data->powernow_table[j].index & 0xff, > + data->powernow_table[j].data & 0xff, > data->powernow_table[j].frequency/1000, > - data->powernow_table[j].index >> 8); > + data->powernow_table[j].data >> 8); > } > } > if (data->batps) > @@ -632,13 +632,13 @@ static int fill_powernow_table(struct powernow_k8_data > *data, > > for (j = 0; j < data->numps; j++) { > int freq; > - powernow_table[j].index = pst[j].fid; /* lower 8 bits */ > - powernow_table[j].index |= (pst[j].vid << 8); /* upper 8 bits */ > + powernow_table[j].data = pst[j].fid; /* lower 8 bits */ > + powernow_table[j].data |= (pst[j].vid << 8); /* upper 8 bits */ > freq = find_khz_freq_from_fid(pst[j].fid); > powernow_table[j].frequency = freq; > } > powernow_table[data->numps].frequency = CPUFREQ_TABLE_END; > - powernow_table[data->numps].index = 0; > + powernow_table[data->numps].data = 0; > > if (query_current_values_with_pending_wait(data)) { > kfree(powernow_table); > @@ -810,7 +810,7 @@ static int powernow_k8_cpu_init_acpi(struct > powernow_k8_data *data) > > powernow_table[data->acpi_data.state_count].frequency = > CPUFREQ_TABLE_END; > - powernow_table[data->acpi_data.state_count].index = 0; > + powernow_table[data->acpi_data.state_count].data = 0; > data->powernow_table = powernow_table; > > if (cpumask_first(cpu_core_mask(data->cpu)) == data->cpu) > @@ -865,7 +865,7 @@ static int fill_powernow_table_fidvid(struct > powernow_k8_data *data, > pr_debug(" %d : fid 0x%x, vid 0x%x\n", i, fid, vid); > > index = fid | (vid<<8); > - powernow_table[i].index = index; > + powernow_table[i].data = index; > > freq = find_khz_freq_from_fid(fid); > powernow_table[i].frequency = freq; > @@ -941,8 +941,8 @@ static int transition_frequency_fidvid(struct > powernow_k8_data *data, > * the cpufreq frequency table in find_psb_table, vid > * are the upper 8 bits. > */ > - fid = data->powernow_table[index].index & 0xFF; > - vid = (data->powernow_table[index].index & 0xFF00) >> 8; > + fid = data->powernow_table[index].data & 0xFF; > + vid = (data->powernow_table[index].data & 0xFF00) >> 8; > > pr_debug("table matched fid 0x%x, giving vid 0x%x\n", fid, vid); > > diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c > b/drivers/cpufreq/pxa2xx-cpufreq.c > index fe4c55b..d2469e7 100644 > --- a/drivers/cpufreq/pxa2xx-cpufreq.c > +++ b/drivers/cpufreq/pxa2xx-cpufreq.c > @@ -419,7 +419,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) > /* Generate pxa25x the run cpufreq_frequency_table struct */ > for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) { > pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz; > - pxa255_run_freq_table[i].index = i; > + pxa255_run_freq_table[i].data = i; > } > pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END; > > @@ -427,7 +427,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) > for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) { > pxa255_turbo_freq_table[i].frequency = > pxa255_turbo_freqs[i].khz; > - pxa255_turbo_freq_table[i].index = i; > + pxa255_turbo_freq_table[i].data = i; > } > pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END; > > @@ -439,9 +439,9 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy) > if (freq > pxa27x_maxfreq) > break; > pxa27x_freq_table[i].frequency = freq; > - pxa27x_freq_table[i].index = i; > + pxa27x_freq_table[i].data = i; > } > - pxa27x_freq_table[i].index = i; > + pxa27x_freq_table[i].data = i; > pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END; > > /* > diff --git a/drivers/cpufreq/pxa3xx-cpufreq.c > b/drivers/cpufreq/pxa3xx-cpufreq.c > index 15d60f8..adaa78b 100644 > --- a/drivers/cpufreq/pxa3xx-cpufreq.c > +++ b/drivers/cpufreq/pxa3xx-cpufreq.c > @@ -98,10 +98,10 @@ static int setup_freqs_table(struct cpufreq_policy > *policy, > return -ENOMEM; > > for (i = 0; i < num; i++) { > - table[i].index = i; > + table[i].data = i; > table[i].frequency = freqs[i].cpufreq_mhz * 1000; > } > - table[num].index = i; > + table[num].data = i; > table[num].frequency = CPUFREQ_TABLE_END; > > pxa3xx_freqs = freqs; > diff --git a/drivers/cpufreq/s3c2416-cpufreq.c > b/drivers/cpufreq/s3c2416-cpufreq.c > index 4f1881e..0c17fe7 100644 > --- a/drivers/cpufreq/s3c2416-cpufreq.c > +++ b/drivers/cpufreq/s3c2416-cpufreq.c > @@ -244,7 +244,7 @@ static int s3c2416_cpufreq_set_target(struct > cpufreq_policy *policy, > if (ret != 0) > goto out; > > - idx = s3c_freq->freq_table[i].index; > + idx = s3c_freq->freq_table[i].data; > > if (idx == SOURCE_HCLK) > to_dvs = 1; > diff --git a/drivers/cpufreq/s3c64xx-cpufreq.c > b/drivers/cpufreq/s3c64xx-cpufreq.c > index 27cacb5..240d5c8 100644 > --- a/drivers/cpufreq/s3c64xx-cpufreq.c > +++ b/drivers/cpufreq/s3c64xx-cpufreq.c > @@ -87,7 +87,7 @@ static int s3c64xx_cpufreq_set_target(struct cpufreq_policy > *policy, > freqs.old = clk_get_rate(armclk) / 1000; > freqs.new = s3c64xx_freq_table[i].frequency; > freqs.flags = 0; > - dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; > + dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].data]; > > if (freqs.old == freqs.new) > return 0; > diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c > index f740b13..edf7b2d 100644 > --- a/drivers/cpufreq/sc520_freq.c > +++ b/drivers/cpufreq/sc520_freq.c > @@ -71,7 +71,7 @@ static void sc520_freq_set_cpu_state(struct cpufreq_policy > *policy, > local_irq_disable(); > > clockspeed_reg = *cpuctl & ~0x03; > - *cpuctl = clockspeed_reg | sc520_freq_table[state].index; > + *cpuctl = clockspeed_reg | sc520_freq_table[state].data; > > local_irq_enable(); > > diff --git a/drivers/cpufreq/sparc-us2e-cpufreq.c > b/drivers/cpufreq/sparc-us2e-cpufreq.c > index 306ae46..216e166 100644 > --- a/drivers/cpufreq/sparc-us2e-cpufreq.c > +++ b/drivers/cpufreq/sparc-us2e-cpufreq.c > @@ -308,17 +308,17 @@ static int __init us2e_freq_cpu_init(struct > cpufreq_policy *policy) > struct cpufreq_frequency_table *table = > &us2e_freq_table[cpu].table[0]; > > - table[0].index = 0; > + table[0].data = 0; > table[0].frequency = clock_tick / 1; > - table[1].index = 1; > + table[1].data = 1; > table[1].frequency = clock_tick / 2; > - table[2].index = 2; > + table[2].data = 2; > table[2].frequency = clock_tick / 4; > - table[2].index = 3; > + table[2].data = 3; > table[2].frequency = clock_tick / 6; > - table[2].index = 4; > + table[2].data = 4; > table[2].frequency = clock_tick / 8; > - table[2].index = 5; > + table[2].data = 5; > table[3].frequency = CPUFREQ_TABLE_END; > > policy->cpuinfo.transition_latency = 0; > diff --git a/drivers/cpufreq/sparc-us3-cpufreq.c > b/drivers/cpufreq/sparc-us3-cpufreq.c > index c71ee14..9889b8e 100644 > --- a/drivers/cpufreq/sparc-us3-cpufreq.c > +++ b/drivers/cpufreq/sparc-us3-cpufreq.c > @@ -169,13 +169,13 @@ static int __init us3_freq_cpu_init(struct > cpufreq_policy *policy) > struct cpufreq_frequency_table *table = > &us3_freq_table[cpu].table[0]; > > - table[0].index = 0; > + table[0].data = 0; > table[0].frequency = clock_tick / 1; > - table[1].index = 1; > + table[1].data = 1; > table[1].frequency = clock_tick / 2; > - table[2].index = 2; > + table[2].data = 2; > table[2].frequency = clock_tick / 32; > - table[3].index = 0; > + table[3].data = 0; > table[3].frequency = CPUFREQ_TABLE_END; > > policy->cpuinfo.transition_latency = 0; > diff --git a/drivers/cpufreq/spear-cpufreq.c b/drivers/cpufreq/spear-cpufreq.c > index 156829f..ec448bfc 100644 > --- a/drivers/cpufreq/spear-cpufreq.c > +++ b/drivers/cpufreq/spear-cpufreq.c > @@ -250,11 +250,11 @@ static int spear_cpufreq_driver_init(void) > } > > for (i = 0; i < cnt; i++) { > - freq_tbl[i].index = i; > + freq_tbl[i].data = i; > freq_tbl[i].frequency = be32_to_cpup(val++); > } > > - freq_tbl[i].index = i; > + freq_tbl[i].data = i; > freq_tbl[i].frequency = CPUFREQ_TABLE_END; > > spear_cpufreq.freq_tbl = freq_tbl; > diff --git a/drivers/cpufreq/speedstep-centrino.c > b/drivers/cpufreq/speedstep-centrino.c > index 618e6f4..fcfa2f8 100644 > --- a/drivers/cpufreq/speedstep-centrino.c > +++ b/drivers/cpufreq/speedstep-centrino.c > @@ -79,11 +79,11 @@ static struct cpufreq_driver centrino_driver; > > /* Computes the correct form for IA32_PERF_CTL MSR for a particular > frequency/voltage operating point; frequency in MHz, volts in mV. > - This is stored as "index" in the structure. */ > + This is stored as "data" in the structure. */ > #define OP(mhz, mv) \ > { \ > .frequency = (mhz) * 1000, \ > - .index = (((mhz)/100) << 8) | ((mv - 700) / 16) \ > + .data = (((mhz)/100) << 8) | ((mv - 700) / 16) \ > } > > /* > @@ -307,7 +307,7 @@ static unsigned extract_clock(unsigned msr, unsigned int > cpu, int failsafe) > per_cpu(centrino_model, cpu)->op_points[i].frequency > != CPUFREQ_TABLE_END; > i++) { > - if (msr == per_cpu(centrino_model, cpu)->op_points[i].index) > + if (msr == per_cpu(centrino_model, cpu)->op_points[i].data) > return per_cpu(centrino_model, cpu)-> > op_points[i].frequency; > } > @@ -501,7 +501,7 @@ static int centrino_target (struct cpufreq_policy *policy, > break; > } > > - msr = per_cpu(centrino_model, cpu)->op_points[newstate].index; > + msr = per_cpu(centrino_model, cpu)->op_points[newstate].data; > > if (first_cpu) { > rdmsr_on_cpu(good_cpu, MSR_IA32_PERF_CTL, &oldmsr, &h); > diff --git a/drivers/cpufreq/tegra-cpufreq.c b/drivers/cpufreq/tegra-cpufreq.c > index c74c0e1..fca6184 100644 > --- a/drivers/cpufreq/tegra-cpufreq.c > +++ b/drivers/cpufreq/tegra-cpufreq.c > @@ -28,7 +28,7 @@ > #include <linux/io.h> > #include <linux/suspend.h> > > -/* Frequency table index must be sequential starting at 0 */ > +/* Frequency table data must be sequential starting at 0 */ > static struct cpufreq_frequency_table freq_table[] = { > { 0, 216000 }, > { 1, 312000 }, > diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c > index 21f261b..e210ff1 100644 > --- a/drivers/mfd/db8500-prcmu.c > +++ b/drivers/mfd/db8500-prcmu.c > @@ -1810,9 +1810,9 @@ static long round_clock_rate(u8 clock, unsigned long > rate) > > /* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ > static struct cpufreq_frequency_table db8500_cpufreq_table[] = { > - { .frequency = 200000, .index = ARM_EXTCLK,}, > - { .frequency = 400000, .index = ARM_50_OPP,}, > - { .frequency = 800000, .index = ARM_100_OPP,}, > + { .frequency = 200000, .data = ARM_EXTCLK,}, > + { .frequency = 400000, .data = ARM_50_OPP,}, > + { .frequency = 800000, .data = ARM_100_OPP,}, > { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ > { .frequency = CPUFREQ_TABLE_END,}, > }; > @@ -1987,7 +1987,7 @@ static int set_armss_rate(unsigned long rate) > return -EINVAL; > > /* Set the new arm opp. */ > - return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].index); > + return db8500_prcmu_set_arm_opp(db8500_cpufreq_table[i].data); > } > > static int set_plldsi_rate(unsigned long rate) > @@ -3137,7 +3137,7 @@ static void db8500_prcmu_update_cpufreq(void) > { > if (prcmu_has_arm_maxopp()) { > db8500_cpufreq_table[3].frequency = 1000000; > - db8500_cpufreq_table[3].index = ARM_MAX_OPP; > + db8500_cpufreq_table[3].data = ARM_MAX_OPP; > } > } > > diff --git a/drivers/sh/clk/core.c b/drivers/sh/clk/core.c > index 7715de2..bc48116 100644 > --- a/drivers/sh/clk/core.c > +++ b/drivers/sh/clk/core.c > @@ -63,12 +63,12 @@ void clk_rate_table_build(struct clk *clk, > else > freq = clk->parent->rate * mult / div; > > - freq_table[i].index = i; > + freq_table[i].data = i; > freq_table[i].frequency = freq; > } > > /* Termination entry */ > - freq_table[i].index = i; > + freq_table[i].data = i; > freq_table[i].frequency = CPUFREQ_TABLE_END; > } > > diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h > index 037d36a..aa0c2a3 100644 > --- a/include/linux/cpufreq.h > +++ b/include/linux/cpufreq.h > @@ -404,7 +404,7 @@ extern struct cpufreq_governor cpufreq_gov_conservative; > #define CPUFREQ_TABLE_END ~1 > > struct cpufreq_frequency_table { > - unsigned int index; /* any */ > + unsigned int data; /* any value, not used by core */ > unsigned int frequency; /* kHz - doesn't need to be in ascending > * order */ > }; > -- I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
