The data sheet does not specify time delay for voltage selection,
thus remove set_voltage_time_sel and delay setting.
Note, currently set_voltage_time_sel callback returns 0 due to missing
delay settings.
Signed-off-by: Axel Lin <axel....@ingics.com>
---
drivers/regulator/ab8500.c | 13 -------------
1 file changed, 13 deletions(-)
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 1a38524..d0d9e83 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -42,7 +42,6 @@
* @voltage_reg: register to control regulator voltage
* @voltage_mask: mask to control regulator voltage
* @voltage_shift: shift to control regulator voltage
- * @delay: startup/set voltage delay in us
*/
struct ab8500_regulator_info {
struct device *dev;
@@ -60,7 +59,6 @@ struct ab8500_regulator_info {
u8 voltage_reg;
u8 voltage_mask;
u8 voltage_shift;
- unsigned int delay;
};
/* voltage tables for the vauxn/vintcore supplies */
@@ -333,15 +331,6 @@ static int ab8500_regulator_set_voltage_sel(struct
regulator_dev *rdev,
return ret;
}
-static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
- unsigned int old_sel,
- unsigned int new_sel)
-{
- struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);
-
- return info->delay;
-}
-
static struct regulator_ops ab8500_regulator_volt_mode_ops = {
.enable = ab8500_regulator_enable,
.disable = ab8500_regulator_disable,
@@ -352,7 +341,6 @@ static struct regulator_ops ab8500_regulator_volt_mode_ops
= {
.get_voltage_sel = ab8500_regulator_get_voltage_sel,
.set_voltage_sel = ab8500_regulator_set_voltage_sel,
.list_voltage = regulator_list_voltage_table,
- .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel,
};
static struct regulator_ops ab8500_regulator_mode_ops = {
@@ -488,7 +476,6 @@ static struct ab8500_regulator_info
.min_uV = 2000000,
.enable_time = 10000,
},
- .delay = 10000,
.load_lp_uA = 1000,
.update_bank = 0x03,
.update_reg = 0x80,
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
