On 03/27/2013 01:15 AM, Axel Lin wrote:
Hi,
The comment of struct ab8500_regulator_info says the delay means
"startup/set voltage delay in us".
I'm confused by the meaning, does it mean enable_time or set_voltage_time_sel
time or both?
* @enable_time: Time taken for the regulator voltage output voltage to
* stabilise after being enabled, in microseconds.
* @set_voltage_time_sel: Time taken for the regulator voltage output voltage
* to stabilise after being set to a new value, in microseconds.
* The function provides the from and to voltage selector, the
* function should return the worst case.
The data sheet does not specify time delay for voltage selection, only
enable time. So I have assumed the same time for voltage selection.
Current code only has delay setting for AB8500_LDO_TVOUT, it looks like it
means enable_time rather than the delay for set_voltage_time_sel.
(well, AB8500_LDO_TVOUT is fixed voltage, it does not implement
set_voltage_time_sel)
ab8500_regulator_set_voltage_time_sel() returns info->delay, but all it's users
(AB8500_LDO_AUX1, AB8500_LDO_AUX2, AB8500_LDO_AUX3, AB8500_LDO_INTCORE)
do not has delay setting. ( So now ab8500_regulator_set_voltage_time_sel
returns 0. )
This is a flaw in the driver. It should specify delay for all
regulators, not just VTVout.
Worst case enable time from data sheet:
Vana: enable time = 140 us
Vaux1/2: enable time = 200 us
Vaux3: enable time = 450 us
Vintcore: enable time = 750 us
Vamic1/2: enable time = 500 us
Vdmic: enable time = 420 us
VTVout: enable time = 500 us
Vaudio: enable time = 140 us
Vusb: enable time = 150 us
Axel
Thanks for looking into it.
Bengt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
