If the bootloader doesn't configure USB DPLL (e.g. in u-boot,
disable CONFIG_USB_EHCI_OMAP), then we get all sorts of problems
like
- division by zero errors at boot [1]
- USB DPLL fails to enter locked state
- USB EHCI Host is non functional
- Device can't enter OFF mode
Initializing the USB DPLL fixes all these issues.
[1]
[ 0.000000] clock: dpll_usb_ck failed transition to 'locked'
[ 0.000000] Division by zero in kernel.
[ 0.000000] [<c001b00c>] (unwind_backtrace+0x0/0xf0) from [<c02b2378>]
(Ldiv0+0x8/0x10)
[ 0.000000] [<c02b2378>] (Ldiv0+0x8/0x10) from [<c041cf3c>]
(clk_divider_set_rate+0x10/0x124)
[ 0.000000] [<c041cf3c>] (clk_divider_set_rate+0x10/0x124) from [<c041bfc4>]
(clk_change_rate+0x3c/0xb4)
[ 0.000000] [<c041bfc4>] (clk_change_rate+0x3c/0xb4) from [<c041c028>]
(clk_change_rate+0xa0/0xb4)
Signed-off-by: Roger Quadros <rog...@ti.com>
---
arch/arm/mach-omap2/cclock44xx_data.c | 19 +++++++++++++++++++
1 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c
b/arch/arm/mach-omap2/cclock44xx_data.c
index bfc46c1..6127bb9 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -53,6 +53,12 @@
*/
#define OMAP4_DPLL_ABE_DEFFREQ 98304000
+/*
+ * OMAP4450 TRM Rev X, section "3.6.3.9.5 DPLL_USB Preferred Settings"
+ * states it must be at 960MHz
+ */
+#define OMAP4_DPLL_USB_DEFFREQ 960000000
+
/* Root clocks */
DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0);
@@ -1729,6 +1735,19 @@ int __init omap4xxx_clk_init(void)
omap2_clk_disable_autoidle_all();
/*
+ * Lock USB_DPLL to avoid issues with USB host and OFF mode
+ */
+ rc = clk_set_rate(&dpll_usb_ck, OMAP4_DPLL_USB_DEFFREQ);
+ if (rc) {
+ pr_err("%s: failed to configure DPLL_USB: %d\n", __func__, rc);
+ } else {
+ rc = clk_set_rate(&dpll_usb_m2_ck, OMAP4_DPLL_USB_DEFFREQ/2);
+ if (rc)
+ pr_err("%s: failed to configure DPLL_USB_M2: %d\n",
+ __func__, rc);
+ }
+
+ /*
* On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
* state when turning the ABE clock domain. Workaround this by
* locking the ABE DPLL on boot.
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
