The UART0 is only available on the Allwinner A10 SoCs, and not on the
A13, so move the uart0 node to sun4i-a10.dtsi.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Acked-by: Emilio López <emi...@elopez.com.ar>
Tested-by: Emilio López <emi...@elopez.com.ar>
---
arch/arm/boot/dts/sun4i-a10.dtsi | 10 ++++++++++
arch/arm/boot/dts/sunxi.dtsi | 10 ----------
2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index 03d2b53..703e7cb 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -47,5 +47,15 @@
allwinner,pull = <0>;
};
};
+
+ uart0: uart@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/sunxi.dtsi b/arch/arm/boot/dts/sunxi.dtsi
index 791c02a..4f78ef7 100644
--- a/arch/arm/boot/dts/sunxi.dtsi
+++ b/arch/arm/boot/dts/sunxi.dtsi
@@ -59,16 +59,6 @@
#interrupt-cells = <1>;
};
- uart0: uart@01c28000 {
- compatible = "snps,dw-apb-uart";
- reg = <0x01c28000 0x400>;
- interrupts = <1>;
- reg-shift = <2>;
- reg-io-width = <4>;
- clocks = <&osc>;
- status = "disabled";
- };
-
uart1: uart@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
