On 04.20 Alan Cox wrote:
> > Just built 2.4.3-ac10 and got an oops when booting. It tries to detect
> > the CD and gives the oops.
>
> Can you back out the ide-cd changes Jens did and see if that fixes it ?
>
>
Reverted the changes in ide-cd.[hc], and same result.
Bootlog from ac9:
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
hda: IOMEGA ZIP 250 ATAPI, ATAPI FLOPPY drive
hdc: CREATIVE CD5230E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
<<<<<<<<<<<< here, ac10 oopses >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
hda: 244736kB, 239/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm
ide-floppy: hda: I/O error, pc = 5a, key = 5, asc = 24, ascq = 0
--
J.A. Magallon # Let the source
mailto:[EMAIL PROTECTED] # be with you, Luke...
Linux werewolf 2.4.3-ac9 #1 SMP Wed Apr 18 10:35:48 CEST 2001 i686
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
