On Wed, Feb 27, 2013 at 09:36:03PM +0000, Arnd Bergmann wrote:
> On Wednesday 27 February 2013, Vinod Koul wrote:
> > Yes we had agreed that I will send it.
> >
> > I have applied this one now, and will send second PULL request to Linus
> > soon.
> >
> > Arnd,
> > The second patch of dw_dmac you wnated to send me fails to apply for me.
> > Can you
> > either rebase or send with your updates with my ack?
>
> I would prefer if you send the patch. I've rebased my patch on top of
> today's upstream tree but could not see any difference to my previous
> version. Anyway, here it is again.
Thanks, I have applied and pushed it now :)
I will send PULL to linus this evening...
--
~Vinod
>
> Arnd
>
> 8<----------
> Subject: [PATCH] dmaengine: dw_dmac: move to generic DMA binding
>
> The original device tree binding for this driver, from Viresh Kumar
> unfortunately conflicted with the generic DMA binding, and did not allow
> to completely seperate slave device configuration from the controller.
>
> This is an attempt to replace it with an implementation of the generic
> binding, but it is currently completely untested, because I do not have
> any hardware with this particular controller.
>
> The patch applies on top of the slave-dma tree, which contains both the base
> support for the generic DMA binding, as well as the earlier attempt from
> Viresh. Both of these are currently not merged upstream however.
>
> This version incorporates feedback from Viresh Kumar, Andy Shevchenko
> and Russell King.
>
> Signed-off-by: Arnd Bergmann <a...@arndb.de>
> Acked-by: Viresh Kumar <viresh.ku...@linaro.org>
> Acked-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
> Cc: Vinod Koul <vinod.k...@linux.intel.com>
> Cc: devicetree-disc...@lists.ozlabs.org
> Cc: linux-arm-ker...@lists.infradead.org
>
> diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt
> b/Documentation/devicetree/bindings/dma/snps-dma.txt
> index 5bb3dfb..d58675e 100644
> --- a/Documentation/devicetree/bindings/dma/snps-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
> @@ -3,59 +3,61 @@
> Required properties:
> - compatible: "snps,dma-spear1340"
> - reg: Address range of the DMAC registers
> -- interrupt-parent: Should be the phandle for the interrupt controller
> - that services interrupts for this device
> - interrupt: Should contain the DMAC interrupt number
> -- nr_channels: Number of channels supported by hardware
> -- is_private: The device channels should be marked as private and not for by
> the
> - general purpose DMA channel allocator. False if not passed.
> +- dma-channels: Number of channels supported by hardware
> +- dma-requests: Number of DMA request lines supported, up to 16
> +- dma-masters: Number of AHB masters supported by the controller
> +- #dma-cells: must be <3>
> - chan_allocation_order: order of allocation of channel, 0 (default):
> ascending,
> 1: descending
> - chan_priority: priority of channels. 0 (default): increase from chan 0->n,
> 1:
> increase from chan n->0
> - block_size: Maximum block size supported by the controller
> -- nr_masters: Number of AHB masters supported by the controller
> - data_width: Maximum data width supported by hardware per AHB master
> (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> -- slave_info:
> - - bus_id: name of this device channel, not just a device name since
> - devices may have more than one channel e.g. "foo_tx". For using the
> - dw_generic_filter(), slave drivers must pass exactly this string as
> - param to filter function.
> - - cfg_hi: Platform-specific initializer for the CFG_HI register
> - - cfg_lo: Platform-specific initializer for the CFG_LO register
> - - src_master: src master for transfers on allocated channel.
> - - dst_master: dest master for transfers on allocated channel.
> +
> +
> +Optional properties:
> +- interrupt-parent: Should be the phandle for the interrupt controller
> + that services interrupts for this device
> +- is_private: The device channels should be marked as private and not for by
> the
> + general purpose DMA channel allocator. False if not passed.
>
> Example:
>
> - dma@fc000000 {
> + dmahost: dma@fc000000 {
> compatible = "snps,dma-spear1340";
> reg = <0xfc000000 0x1000>;
> interrupt-parent = <&vic1>;
> interrupts = <12>;
>
> - nr_channels = <8>;
> + dma-channels = <8>;
> + dma-requests = <16>;
> + dma-masters = <2>;
> + #dma-cells = <3>;
> chan_allocation_order = <1>;
> chan_priority = <1>;
> block_size = <0xfff>;
> - nr_masters = <2>;
> data_width = <3 3 0 0>;
> + };
>
> - slave_info {
> - uart0-tx {
> - bus_id = "uart0-tx";
> - cfg_hi = <0x4000>; /* 0x8 << 11 */
> - cfg_lo = <0>;
> - src_master = <0>;
> - dst_master = <1>;
> - };
> - spi0-tx {
> - bus_id = "spi0-tx";
> - cfg_hi = <0x2000>; /* 0x4 << 11 */
> - cfg_lo = <0>;
> - src_master = <0>;
> - dst_master = <0>;
> - };
> - };
> +DMA clients connected to the Designware DMA controller must use the format
> +described in the dma.txt file, using a four-cell specifier for each channel.
> +The four cells in order are:
> +
> +1. A phandle pointing to the DMA controller
> +2. The DMA request line number
> +3. Source master for transfers on allocated channel
> +4. Destination master for transfers on allocated channel
> +
> +Example:
> +
> + serial@e0000000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0xe0000000 0x1000>;
> + interrupts = <0 35 0x4>;
> + status = "disabled";
> + dmas = <&dmahost 12 0 1>,
> + <&dmahost 13 0 1 0>;
> + dma-names = "rx", "rx";
> };
> diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
> index 51c3ea2..c599558 100644
> --- a/drivers/dma/dw_dmac.c
> +++ b/drivers/dma/dw_dmac.c
> @@ -20,6 +20,7 @@
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/of.h>
> +#include <linux/of_dma.h>
> #include <linux/mm.h>
> #include <linux/module.h>
> #include <linux/platform_device.h>
> @@ -171,7 +172,13 @@ static void dwc_initialize(struct dw_dma_chan *dwc)
> if (dwc->initialized == true)
> return;
>
> - if (dws) {
> + if (dws && dws->cfg_hi == ~0 && dws->cfg_lo == ~0) {
> + /* autoconfigure based on request line from DT */
> + if (dwc->direction == DMA_MEM_TO_DEV)
> + cfghi = DWC_CFGH_DST_PER(dwc->request_line);
> + else if (dwc->direction == DMA_DEV_TO_MEM)
> + cfghi = DWC_CFGH_SRC_PER(dwc->request_line);
> + } else if (dws) {
> /*
> * We need controller-specific data to set up slave
> * transfers.
> @@ -1226,49 +1233,64 @@ static void dwc_free_chan_resources(struct dma_chan
> *chan)
> dev_vdbg(chan2dev(chan), "%s: done\n", __func__);
> }
>
> -bool dw_dma_generic_filter(struct dma_chan *chan, void *param)
> +struct dw_dma_filter_args {
> + struct dw_dma *dw;
> + unsigned int req;
> + unsigned int src;
> + unsigned int dst;
> +};
> +
> +static bool dw_dma_generic_filter(struct dma_chan *chan, void *param)
> {
> + struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
> struct dw_dma *dw = to_dw_dma(chan->device);
> - static struct dw_dma *last_dw;
> - static char *last_bus_id;
> - int i = -1;
> + struct dw_dma_filter_args *fargs = param;
> + struct dw_dma_slave *dws = &dwc->slave;
>
> - /*
> - * dmaengine framework calls this routine for all channels of all dma
> - * controller, until true is returned. If 'param' bus_id is not
> - * registered with a dma controller (dw), then there is no need of
> - * running below function for all channels of dw.
> - *
> - * This block of code does this by saving the parameters of last
> - * failure. If dw and param are same, i.e. trying on same dw with
> - * different channel, return false.
> - */
> - if ((last_dw == dw) && (last_bus_id == param))
> - return false;
> - /*
> - * Return true:
> - * - If dw_dma's platform data is not filled with slave info, then all
> - * dma controllers are fine for transfer.
> - * - Or if param is NULL
> - */
> - if (!dw->sd || !param)
> - return true;
> + /* ensure the device matches our channel */
> + if (chan->device != &fargs->dw->dma)
> + return false;
>
> - while (++i < dw->sd_count) {
> - if (!strcmp(dw->sd[i].bus_id, param)) {
> - chan->private = &dw->sd[i];
> - last_dw = NULL;
> - last_bus_id = NULL;
> + dws->dma_dev = dw->dma.dev;
> + dws->cfg_hi = ~0;
> + dws->cfg_lo = ~0;
> + dws->src_master = fargs->src;
> + dws->dst_master = fargs->dst;
>
> - return true;
> - }
> - }
> + dwc->request_line = fargs->req;
>
> - last_dw = dw;
> - last_bus_id = param;
> - return false;
> + chan->private = dws;
> +
> + return true;
> +}
> +
> +static struct dma_chan *dw_dma_xlate(struct of_phandle_args *dma_spec,
> + struct of_dma *ofdma)
> +{
> + struct dw_dma *dw = ofdma->of_dma_data;
> + struct dw_dma_filter_args fargs = {
> + .dw = dw,
> + };
> + dma_cap_mask_t cap;
> +
> + if (dma_spec->args_count != 3)
> + return NULL;
> +
> + fargs.req = be32_to_cpup(dma_spec->args+0);
> + fargs.src = be32_to_cpup(dma_spec->args+1);
> + fargs.dst = be32_to_cpup(dma_spec->args+2);
> +
> + if (WARN_ON(fargs.req >= DW_DMA_MAX_NR_REQUESTS ||
> + fargs.src >= dw->nr_masters ||
> + fargs.dst >= dw->nr_masters))
> + return NULL;
> +
> + dma_cap_zero(cap);
> + dma_cap_set(DMA_SLAVE, cap);
> +
> + /* TODO: there should be a simpler way to do this */
> + return dma_request_channel(cap, dw_dma_generic_filter, &fargs);
> }
> -EXPORT_SYMBOL(dw_dma_generic_filter);
>
> /* --------------------- Cyclic DMA API extensions -------------------- */
>
> @@ -1554,9 +1576,8 @@ static void dw_dma_off(struct dw_dma *dw)
> static struct dw_dma_platform_data *
> dw_dma_parse_dt(struct platform_device *pdev)
> {
> - struct device_node *sn, *cn, *np = pdev->dev.of_node;
> + struct device_node *np = pdev->dev.of_node;
> struct dw_dma_platform_data *pdata;
> - struct dw_dma_slave *sd;
> u32 tmp, arr[4];
>
> if (!np) {
> @@ -1568,7 +1589,7 @@ dw_dma_parse_dt(struct platform_device *pdev)
> if (!pdata)
> return NULL;
>
> - if (of_property_read_u32(np, "nr_channels", &pdata->nr_channels))
> + if (of_property_read_u32(np, "dma-channels", &pdata->nr_channels))
> return NULL;
>
> if (of_property_read_bool(np, "is_private"))
> @@ -1583,7 +1604,7 @@ dw_dma_parse_dt(struct platform_device *pdev)
> if (!of_property_read_u32(np, "block_size", &tmp))
> pdata->block_size = tmp;
>
> - if (!of_property_read_u32(np, "nr_masters", &tmp)) {
> + if (!of_property_read_u32(np, "dma-masters", &tmp)) {
> if (tmp > 4)
> return NULL;
>
> @@ -1595,36 +1616,6 @@ dw_dma_parse_dt(struct platform_device *pdev)
> for (tmp = 0; tmp < pdata->nr_masters; tmp++)
> pdata->data_width[tmp] = arr[tmp];
>
> - /* parse slave data */
> - sn = of_find_node_by_name(np, "slave_info");
> - if (!sn)
> - return pdata;
> -
> - /* calculate number of slaves */
> - tmp = of_get_child_count(sn);
> - if (!tmp)
> - return NULL;
> -
> - sd = devm_kzalloc(&pdev->dev, sizeof(*sd) * tmp, GFP_KERNEL);
> - if (!sd)
> - return NULL;
> -
> - pdata->sd = sd;
> - pdata->sd_count = tmp;
> -
> - for_each_child_of_node(sn, cn) {
> - sd->dma_dev = &pdev->dev;
> - of_property_read_string(cn, "bus_id", &sd->bus_id);
> - of_property_read_u32(cn, "cfg_hi", &sd->cfg_hi);
> - of_property_read_u32(cn, "cfg_lo", &sd->cfg_lo);
> - if (!of_property_read_u32(cn, "src_master", &tmp))
> - sd->src_master = tmp;
> -
> - if (!of_property_read_u32(cn, "dst_master", &tmp))
> - sd->dst_master = tmp;
> - sd++;
> - }
> -
> return pdata;
> }
> #else
> @@ -1705,8 +1696,6 @@ static int dw_probe(struct platform_device *pdev)
> clk_prepare_enable(dw->clk);
>
> dw->regs = regs;
> - dw->sd = pdata->sd;
> - dw->sd_count = pdata->sd_count;
>
> /* get hardware configuration parameters */
> if (autocfg) {
> @@ -1837,6 +1826,14 @@ static int dw_probe(struct platform_device *pdev)
>
> dma_async_device_register(&dw->dma);
>
> + if (pdev->dev.of_node) {
> + err = of_dma_controller_register(pdev->dev.of_node,
> + dw_dma_xlate, dw);
> + if (err && err != -ENODEV)
> + dev_err(&pdev->dev,
> + "could not register of_dma_controller\n");
> + }
> +
> return 0;
> }
>
> @@ -1845,6 +1842,8 @@ static int dw_remove(struct platform_device *pdev)
> struct dw_dma *dw = platform_get_drvdata(pdev);
> struct dw_dma_chan *dwc, *_dwc;
>
> + if (pdev->dev.of_node)
> + of_dma_controller_free(pdev->dev.of_node);
> dw_dma_off(dw);
> dma_async_device_unregister(&dw->dma);
>
> diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
> index 88dd8eb..cf0ce5c 100644
> --- a/drivers/dma/dw_dmac_regs.h
> +++ b/drivers/dma/dw_dmac_regs.h
> @@ -13,6 +13,7 @@
> #include <linux/dw_dmac.h>
>
> #define DW_DMA_MAX_NR_CHANNELS 8
> +#define DW_DMA_MAX_NR_REQUESTS 16
>
> /* flow controller */
> enum dw_dma_fc {
> @@ -211,6 +212,8 @@ struct dw_dma_chan {
> /* hardware configuration */
> unsigned int block_size;
> bool nollp;
> + unsigned int request_line;
> + struct dw_dma_slave slave;
>
> /* configuration passed via DMA_SLAVE_CONFIG */
> struct dma_slave_config dma_sconfig;
> @@ -239,10 +242,6 @@ struct dw_dma {
> struct tasklet_struct tasklet;
> struct clk *clk;
>
> - /* slave information */
> - struct dw_dma_slave *sd;
> - unsigned int sd_count;
> -
> u8 all_chan_mask;
>
> /* hardware configuration */
> diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
> index 41766de..481ab23 100644
> --- a/include/linux/dw_dmac.h
> +++ b/include/linux/dw_dmac.h
> @@ -27,7 +27,6 @@
> */
> struct dw_dma_slave {
> struct device *dma_dev;
> - const char *bus_id;
> u32 cfg_hi;
> u32 cfg_lo;
> u8 src_master;
> @@ -60,9 +59,6 @@ struct dw_dma_platform_data {
> unsigned short block_size;
> unsigned char nr_masters;
> unsigned char data_width[4];
> -
> - struct dw_dma_slave *sd;
> - unsigned int sd_count;
> };
>
> /* bursts size */
> @@ -114,6 +110,5 @@ void dw_dma_cyclic_stop(struct dma_chan *chan);
> dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan);
>
> dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan);
> -bool dw_dma_generic_filter(struct dma_chan *chan, void *param);
>
> #endif /* DW_DMAC_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
