Hi Greg,
On 02/27/2013 02:08 AM, Greg Kroah-Hartman wrote:
> 3.4-stable review patch. If anyone has any objections, please let me know.
>
> ------------------
>
> From: Roger Quadros <rog...@ti.com>
>
> commit 428525f97153505e83983460a8d08a3210aa6b8a upstream.
>
> This driver does not request any gpios so don't free them.
> Fixes L3 bus error on multiple modprobe/rmmod of ehci_hcd
> with ehci-omap in use.
Please drop this patch from 3.4-stable.
In 3.4, the driver requests the gpios in probe() so they must be freed
in remove() and this patch should not be applied. Thanks.
cheers,
-roger
>
> Without this patch, EHCI will break on repeated insmod/rmmod
> of ehci_hcd for all OMAP2+ platforms that use EHCI and
> set 'phy_reset = true' in usbhs_omap_board_data.
> i.e.
>
> board-3430sdp.c: .phy_reset = true,
> board-3630sdp.c: .phy_reset = true,
> board-am3517crane.c: .phy_reset = true,
> board-am3517evm.c: .phy_reset = true,
> board-cm-t3517.c: .phy_reset = true,
> board-cm-t35.c: .phy_reset = true,
> board-devkit8000.c: .phy_reset = true,
> board-igep0020.c: .phy_reset = true,
> board-igep0020.c: .phy_reset = true,
> board-omap3beagle.c: .phy_reset = true,
> board-omap3evm.c: .phy_reset = true,
> board-omap3pandora.c: .phy_reset = true,
> board-omap3stalker.c: .phy_reset = true,
> board-omap3touchbook.c: .phy_reset = true,
> board-omap4panda.c: .phy_reset = false,
> board-overo.c: .phy_reset = true,
> board-zoom.c: .phy_reset = true,
>
> Signed-off-by: Roger Quadros <rog...@ti.com>
> Reviewed-by: Felipe Balbi <ba...@ti.com>
> Acked-by: Alan Stern <st...@rowland.harvard.edu>
> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
>
> ---
> drivers/usb/host/ehci-omap.c | 8 --------
> 1 file changed, 8 deletions(-)
>
> --- a/drivers/usb/host/ehci-omap.c
> +++ b/drivers/usb/host/ehci-omap.c
> @@ -288,7 +288,6 @@ static int ehci_hcd_omap_remove(struct p
> {
> struct device *dev = &pdev->dev;
> struct usb_hcd *hcd = dev_get_drvdata(dev);
> - struct ehci_hcd_omap_platform_data *pdata = dev->platform_data;
>
> usb_remove_hcd(hcd);
> disable_put_regulator(dev->platform_data);
> @@ -297,13 +296,6 @@ static int ehci_hcd_omap_remove(struct p
> pm_runtime_put_sync(dev);
> pm_runtime_disable(dev);
>
> - if (pdata->phy_reset) {
> - if (gpio_is_valid(pdata->reset_gpio_port[0]))
> - gpio_free(pdata->reset_gpio_port[0]);
> -
> - if (gpio_is_valid(pdata->reset_gpio_port[1]))
> - gpio_free(pdata->reset_gpio_port[1]);
> - }
> return 0;
> }
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
