The T100 object replaces the old T9 multitouch touchscreen object in new
chips.

Signed-off-by: Nick Dyer <nick.d...@itdev.co.uk>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |  307 ++++++++++++++++++++++++++++--
 1 file changed, 296 insertions(+), 11 deletions(-)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c 
b/drivers/input/touchscreen/atmel_mxt_ts.c
index 24c262c..13e2028 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -65,6 +65,7 @@
 #define MXT_SPT_CTECONFIG_T46          46
 #define MXT_SPT_NOISESUPPRESSION_T48   48
 #define MXT_PROCI_ACTIVE_STYLUS_T63    63
+#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
 
 /* MXT_GEN_MESSAGE_T5 object */
 #define MXT_RPTID_NOMSG                0xff
@@ -148,6 +149,23 @@ static unsigned long mxt_t15_keystatus;
 
 #define MXT_STYLUS_PRESSURE_MASK       0x3F
 
+/* T100 Multiple Touch Touchscreen */
+#define MXT_T100_CTRL          0
+#define MXT_T100_CFG1          1
+#define MXT_T100_TCHAUX                3
+#define MXT_T100_XRANGE                13
+#define MXT_T100_YRANGE                24
+
+#define MXT_T100_CFG_SWITCHXY  (1 << 5)
+
+#define MXT_T100_TCHAUX_VECT   (1 << 0)
+#define MXT_T100_TCHAUX_AMPL   (1 << 1)
+#define MXT_T100_TCHAUX_AREA   (1 << 2)
+
+#define MXT_T100_DETECT                (1 << 7)
+#define MXT_T100_TYPE_MASK     0x70
+#define MXT_T100_TYPE_STYLUS   0x20
+
 /* Delay times */
 #define MXT_BACKUP_TIME                25      /* msec */
 #define MXT_RESET_TIME         200     /* msec */
@@ -212,6 +230,9 @@ struct mxt_data {
        unsigned int irq;
        unsigned int max_x;
        unsigned int max_y;
+       u8 aux_ampl;
+       u8 aux_area;
+       u8 aux_vect;
        struct bin_attribute mem_access_attr;
        bool debug_enabled;
        u8 max_reportid;
@@ -246,6 +267,8 @@ struct mxt_data {
        u8 T48_reportid;
        u8 T63_reportid_min;
        u8 T63_reportid_max;
+       u8 T100_reportid_min;
+       u8 T100_reportid_max;
 };
 
 /* I2C slave address pairs */
@@ -706,6 +729,79 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 
*message)
        data->update_input = true;
 }
 
+static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
+{
+       struct device *dev = &data->client->dev;
+       struct input_dev *input_dev = data->input_dev;
+       int id;
+       u8 status;
+       int x;
+       int y;
+       int tool;
+
+       /* do not report events if input device not yet registered */
+       if (!input_dev)
+               return;
+
+       id = message[0] - data->T100_reportid_min - 2;
+
+       /* ignore SCRSTATUS events */
+       if (id < 0)
+               return;
+
+       status = message[1];
+       x = (message[3] << 8) | message[2];
+       y = (message[5] << 8) | message[4];
+
+       dev_dbg(dev,
+               "[%u] status:%02X x:%u y:%u aux:%02X%02X%02X\n",
+               id,
+               status,
+               x, y,
+               message[6],
+               message[7],
+               message[8]);
+
+       input_mt_slot(input_dev, id);
+
+       if (status & MXT_T100_DETECT) {
+               /* A reported size of zero indicates that the reported touch
+                * is a stylus from a linked Stylus T47 object. */
+               if ((status & MXT_T100_TYPE_MASK) == MXT_T100_TYPE_STYLUS)
+                       tool = MT_TOOL_PEN;
+               else
+                       tool = MT_TOOL_FINGER;
+
+               /* Touch active */
+               input_mt_report_slot_state(input_dev, tool, 1);
+               input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+               input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+
+               if (data->aux_ampl)
+                       input_report_abs(input_dev, ABS_MT_PRESSURE,
+                                        message[data->aux_ampl]);
+
+               if (data->aux_area) {
+                       if (tool == MT_TOOL_PEN)
+                               input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+                                                MXT_TOUCH_MAJOR_T47_STYLUS);
+                       else
+                               input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
+                                                message[data->aux_area]);
+               }
+
+               if (data->aux_vect)
+                       input_report_abs(input_dev, ABS_MT_ORIENTATION,
+                                        message[data->aux_vect]);
+       } else {
+               /* Touch no longer active, close out slot */
+               input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
+       }
+
+       data->update_input = true;
+}
+
+
 static void mxt_proc_t15_messages(struct mxt_data *data, u8 *msg)
 {
        struct input_dev *input_dev = data->input_dev;
@@ -839,6 +935,10 @@ static int mxt_proc_message(struct mxt_data *data, u8 
*message)
            && report_id <= data->T9_reportid_max) {
                mxt_proc_t9_message(data, message);
                handled = true;
+       } else if (report_id >= data->T100_reportid_min
+           && report_id <= data->T100_reportid_max) {
+               mxt_proc_t100_message(data, message);
+               handled = true;
        } else if (report_id >= data->T63_reportid_min
                   && report_id <= data->T63_reportid_max) {
                mxt_proc_t63_messages(data, message);
@@ -1487,6 +1587,12 @@ static int mxt_parse_object_table(struct mxt_data *data)
                        data->num_stylusids =
                                object->num_report_ids * OBP_INSTANCES(object);
                        break;
+               case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+                       data->T100_reportid_min = min_id;
+                       data->T100_reportid_max = max_id;
+                       /* first two report IDs reserved */
+                       data->num_touchids = object->num_report_ids - 2;
+                       break;
                }
 
                end_address = object->start_address
@@ -1529,6 +1635,8 @@ static void mxt_free_object_table(struct mxt_data *data)
        data->T7_address = 0;
        data->T9_reportid_min = 0;
        data->T9_reportid_max = 0;
+       data->T100_reportid_min = 0;
+       data->T100_reportid_max = 0;
 }
 
 static int mxt_read_info_block(struct mxt_data *data)
@@ -1722,6 +1830,172 @@ fail:
        data->use_regulator = false;
 }
 
+static int mxt_read_t100_config(struct mxt_data *data)
+{
+       struct i2c_client *client = data->client;
+       int error;
+       struct mxt_object *object;
+       u16 range_x, range_y;
+       u8 cfg, tchaux;
+       u8 aux;
+
+       object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
+       if (!object)
+               return -EINVAL;
+
+       error = __mxt_read_reg(client,
+                              object->start_address + MXT_T100_XRANGE,
+                              sizeof(range_x), &range_x);
+       if (error)
+               return error;
+
+       le16_to_cpus(range_x);
+
+       error = __mxt_read_reg(client,
+                              object->start_address + MXT_T100_YRANGE,
+                              sizeof(range_y), &range_y);
+       if (error)
+               return error;
+
+       le16_to_cpus(range_y);
+
+       error =  __mxt_read_reg(client,
+                               object->start_address + MXT_T100_CFG1,
+                               1, &cfg);
+       if (error)
+               return error;
+
+       error =  __mxt_read_reg(client,
+                               object->start_address + MXT_T100_TCHAUX,
+                               1, &tchaux);
+       if (error)
+               return error;
+
+       /* Handle default values */
+       if (range_x == 0)
+               range_x = 1023;
+
+       /* Handle default values */
+       if (range_x == 0)
+               range_x = 1023;
+
+       if (range_y == 0)
+               range_y = 1023;
+
+       if (cfg & MXT_T100_CFG_SWITCHXY) {
+               data->max_x = range_y;
+               data->max_y = range_x;
+       } else {
+               data->max_x = range_x;
+               data->max_y = range_y;
+       }
+
+       /* allocate aux bytes */
+       aux = 6;
+
+       if (tchaux & MXT_T100_TCHAUX_VECT)
+               data->aux_vect = aux++;
+
+       if (tchaux & MXT_T100_TCHAUX_AMPL)
+               data->aux_ampl = aux++;
+
+       if (tchaux & MXT_T100_TCHAUX_AREA)
+               data->aux_area = aux++;
+
+       dev_info(&client->dev,
+                "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+       return 0;
+}
+
+static int mxt_input_open(struct input_dev *dev);
+static void mxt_input_close(struct input_dev *dev);
+
+static int mxt_initialize_t100_input_device(struct mxt_data *data)
+{
+       struct i2c_client *client = data->client;
+       struct input_dev *input_dev;
+       int error;
+
+       error = mxt_read_t100_config(data);
+       if (error)
+               dev_warn(&client->dev, "Failed to initialize T9 resolution\n");
+
+       input_dev = input_allocate_device();
+       if (!data || !input_dev) {
+               dev_err(&client->dev, "Failed to allocate memory\n");
+               return -ENOMEM;
+       }
+
+       if (data->pdata->input_name)
+               input_dev->name = data->pdata->input_name;
+       else
+               input_dev->name = "Atmel maXTouch Touchscreen";
+
+       snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
+                client->adapter->nr, client->addr);
+       input_dev->phys = data->phys;
+
+       input_dev->id.bustype = BUS_I2C;
+       input_dev->dev.parent = &client->dev;
+       input_dev->open = mxt_input_open;
+       input_dev->close = mxt_input_close;
+
+       set_bit(EV_ABS, input_dev->evbit);
+       input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
+       /* For single touch */
+       input_set_abs_params(input_dev, ABS_X,
+                            0, data->max_x, 0, 0);
+       input_set_abs_params(input_dev, ABS_Y,
+                            0, data->max_y, 0, 0);
+
+       if (data->aux_ampl)
+               input_set_abs_params(input_dev, ABS_PRESSURE,
+                                    0, 255, 0, 0);
+
+       /* For multi touch */
+       error = input_mt_init_slots(input_dev, data->num_touchids, 0);
+       if (error)
+               goto err_free_mem;
+
+       input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+                            0, data->max_x, 0, 0);
+       input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+                            0, data->max_y, 0, 0);
+
+       if (data->aux_area)
+               input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+                                    0, MXT_MAX_AREA, 0, 0);
+
+       if (data->aux_ampl)
+               input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+                                    0, 255, 0, 0);
+
+       if (data->aux_vect)
+               input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+                                    0, 255, 0, 0);
+
+       input_set_drvdata(input_dev, data);
+
+       error = input_register_device(input_dev);
+       if (error) {
+               dev_err(&client->dev, "Error %d registering input device\n",
+                       error);
+               goto err_free_mem;
+       }
+
+       data->input_dev = input_dev;
+
+       return 0;
+
+err_free_mem:
+       input_free_device(input_dev);
+       return error;
+}
+
+static int mxt_initialize_t9_input_device(struct mxt_data *data);
+
 static int mxt_initialize(struct mxt_data *data)
 {
        struct i2c_client *client = data->client;
@@ -1771,6 +2045,26 @@ retry_probe:
                return error;
        }
 
+       if (data->T9_reportid_min) {
+               error = mxt_initialize_t9_input_device(data);
+               if (error) {
+                       dev_err(&client->dev,
+                               "error %d registering T9 input device\n",
+                               error);
+                       return error;
+               }
+       } else if (data->T100_reportid_min) {
+               error = mxt_initialize_t100_input_device(data);
+               if (error) {
+                       dev_err(&client->dev,
+                               "error %d registering T100 input device\n",
+                               error);
+                       return error;
+               }
+       } else {
+               dev_warn(&client->dev, "No touch object detected\n");
+       }
+
        return 0;
 }
 
@@ -2305,13 +2599,6 @@ static int mxt_probe(struct i2c_client *client,
        if (error)
                goto err_free_mem;
 
-       error = mxt_initialize_t9_input_device(data);
-       if (error) {
-               dev_err(&client->dev, "Error %d registering input device\n",
-                       error);
-               goto err_free_irq;
-       }
-
        error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
                                     pdata->irqflags | IRQF_ONESHOT,
                                     client->name, data);
@@ -2324,7 +2611,7 @@ static int mxt_probe(struct i2c_client *client,
        if (error) {
                dev_err(&client->dev, "Failure %d creating sysfs group\n",
                        error);
-               goto err_unregister_device;
+               goto err_free_irq;
        }
 
        sysfs_bin_attr_init(&data->mem_access_attr);
@@ -2344,9 +2631,6 @@ static int mxt_probe(struct i2c_client *client,
 
 err_remove_sysfs_group:
        sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
-err_unregister_device:
-       input_unregister_device(data->input_dev);
-       data->input_dev = NULL;
 err_free_irq:
        free_irq(client->irq, data);
 err_free_object:
@@ -2364,6 +2648,7 @@ static int mxt_remove(struct i2c_client *client)
        sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
        free_irq(data->irq, data);
        input_unregister_device(data->input_dev);
+       data->input_dev = NULL;
        regulator_put(data->reg_avdd);
        regulator_put(data->reg_vdd);
        mxt_free_object_table(data);
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to