On Fri, Feb 15, 2013 at 11:07:16AM +0100, Guennadi Liakhovetski wrote:
> Add device-tree bindings to the AS3711 regulator and backlight drivers.
>
> Signed-off-by: Guennadi Liakhovetski <g.liakhovet...@gmx.de>
> ---
>
> As usual - comments to the new bindings are very welcome!
>
> Documentation/devicetree/bindings/mfd/as3711.txt | 73 +++++++++++++
> drivers/mfd/as3711.c | 30 +++++-
> drivers/regulator/as3711-regulator.c | 69 ++++++++++++-
> drivers/video/backlight/as3711_bl.c | 118
> +++++++++++++++++++++-
> 4 files changed, 282 insertions(+), 8 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/as3711.txt
>
> diff --git a/Documentation/devicetree/bindings/mfd/as3711.txt
> b/Documentation/devicetree/bindings/mfd/as3711.txt
> new file mode 100644
> index 0000000..d98cf18
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/as3711.txt
> @@ -0,0 +1,73 @@
> +AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO
> power
> +supplies, a battery charger and an RTC. So far only bindings for the two
> stepup
> +DCDC converters are defined. Other DCDC and LDO supplies are configured,
> using
> +standard regulator properties, they must belong to a sub-node, called
> +"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup
> converter
> +configuration should be placed in a subnode, called "backlight."
> +
> +Compulsory properties:
> +- compatible : must be "ams,as3711"
> +- reg : specifies the I2C address
> +
> +To use the SU1 converter as a backlight source the following two properties
> must
> +be provided:
> +- su1-dev : framebuffer phandle
> +- su1-max-uA : maximum current
> +
> +To use the SU2 converter as a backlight source the following two properties
> must
> +be provided:
> +- su2-dev : framebuffer phandle
> +- su1-max-uA : maximum current
> +
> +Additionally one of these properties must be provided to select the type of
> +feedback used:
> +- su2-feedback-voltage : voltage feedback is used
> +- su2-feedback-curr1 : CURR1 input used for current feedback
> +- su2-feedback-curr2 : CURR2 input used for current feedback
> +- su2-feedback-curr3 : CURR3 input used for current feedback
> +- su2-feedback-curr-auto: automatic current feedback selection
> +
> +and one of these to select the over-voltage protection pin
> +- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection
> +- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection
> +- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection
> +- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection
> +
> +If "su2-feedback-curr-auto" is selected, one or more of the following
> properties
> +have to be specified:
> +- su2-auto-curr1 : use CURR1 input for current feedback
> +- su2-auto-curr2 : use CURR2 input for current feedback
> +- su2-auto-curr3 : use CURR3 input for current feedback
> +
> +Example:
> +
> +as3711@40 {
> + compatible = "ams,as3711";
> + reg = <0x40>;
> +
> + regulators {
> + sd4 {
> + regulator-name = "1.215V";
> + regulator-min-microvolt = <1215000>;
> + regulator-max-microvolt = <1235000>;
> + };
> + ldo2 {
> + regulator-name = "2.8V CPU";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> +
> + backlight {
> + compatible = "ams,as3711-bl";
> + su2-dev = <&lcdc>;
> + su2-max-uA = <36000>;
> + su2-feedback-curr-auto;
> + su2-fbprot-gpio4;
> + su2-auto-curr1;
> + su2-auto-curr2;
> + su2-auto-curr3;
> + };
> +};
> diff --git a/drivers/mfd/as3711.c b/drivers/mfd/as3711.c
> index e994c96..5e0e8b3 100644
> --- a/drivers/mfd/as3711.c
> +++ b/drivers/mfd/as3711.c
> @@ -112,16 +112,37 @@ static const struct regmap_config as3711_regmap_config
> = {
> .cache_type = REGCACHE_RBTREE,
> };
>
> +#ifdef CONFIG_OF
> +static struct of_device_id as3711_of_match[] = {
> + {.compatible = "ams,as3711",},
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, as3711_of_match);
> +#endif
> +
> static int as3711_i2c_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> struct as3711 *as3711;
> - struct as3711_platform_data *pdata = client->dev.platform_data;
> + struct as3711_platform_data *pdata;
> unsigned int id1, id2;
> int ret;
>
> - if (!pdata)
> - dev_dbg(&client->dev, "Platform data not found\n");
> + if (!client->dev.of_node) {
> + pdata = client->dev.platform_data;
> + if (!pdata)
> + dev_dbg(&client->dev, "Platform data not found\n");
> + } else {
> + if (!of_device_is_available(client->dev.of_node))
> + return -ENODEV;
The wonder that is kbuild tells me that the above call to
of_device_is_available() may cause a build-time error.
Perhaps it or this entire else clause should be guarded by CONFIG_OF?
> +
> + pdata = devm_kzalloc(&client->dev,
> + sizeof(*pdata), GFP_KERNEL);
> + if (!pdata) {
> + dev_err(&client->dev, "Failed to allocate pdata\n");
> + return -ENOMEM;
> + }
> + }
>
> as3711 = devm_kzalloc(&client->dev, sizeof(struct as3711), GFP_KERNEL);
> if (!as3711) {
> @@ -193,7 +214,8 @@ static struct i2c_driver as3711_i2c_driver = {
> .driver = {
> .name = "as3711",
> .owner = THIS_MODULE,
> - },
> + .of_match_table = of_match_ptr(as3711_of_match),
> + },
> .probe = as3711_i2c_probe,
> .remove = as3711_i2c_remove,
> .id_table = as3711_i2c_id,
> diff --git a/drivers/regulator/as3711-regulator.c
> b/drivers/regulator/as3711-regulator.c
> index f0ba8c4..cf145fc 100644
> --- a/drivers/regulator/as3711-regulator.c
> +++ b/drivers/regulator/as3711-regulator.c
> @@ -13,9 +13,11 @@
> #include <linux/init.h>
> #include <linux/mfd/as3711.h>
> #include <linux/module.h>
> +#include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> #include <linux/regulator/driver.h>
> +#include <linux/regulator/of_regulator.h>
> #include <linux/slab.h>
>
> struct as3711_regulator_info {
> @@ -276,6 +278,57 @@ static struct as3711_regulator_info as3711_reg_info[] = {
>
> #define AS3711_REGULATOR_NUM ARRAY_SIZE(as3711_reg_info)
>
> +static const char *as3711_regulator_of_names[AS3711_REGULATOR_NUM] = {
> + [AS3711_REGULATOR_SD_1] = "sd1",
> + [AS3711_REGULATOR_SD_2] = "sd2",
> + [AS3711_REGULATOR_SD_3] = "sd3",
> + [AS3711_REGULATOR_SD_4] = "sd4",
> + [AS3711_REGULATOR_LDO_1] = "ldo1",
> + [AS3711_REGULATOR_LDO_2] = "ldo2",
> + [AS3711_REGULATOR_LDO_3] = "ldo3",
> + [AS3711_REGULATOR_LDO_4] = "ldo4",
> + [AS3711_REGULATOR_LDO_5] = "ldo5",
> + [AS3711_REGULATOR_LDO_6] = "ldo6",
> + [AS3711_REGULATOR_LDO_7] = "ldo7",
> + [AS3711_REGULATOR_LDO_8] = "ldo8",
> +};
> +
> +static int as3711_regulator_parse_dt(struct device *dev)
> +{
> + struct as3711_regulator_pdata *pdata = dev_get_platdata(dev);
> + struct device_node *regulators =
> + of_find_node_by_name(dev->parent->of_node, "regulators");
> + struct of_regulator_match *matches, *match;
> + const int count = AS3711_REGULATOR_NUM;
> + int ret, i;
> +
> + if (!regulators) {
> + dev_err(dev, "regulator node not found\n");
> + return -ENODEV;
> + }
> +
> + matches = devm_kzalloc(dev, sizeof(*matches) * count, GFP_KERNEL);
> + if (!matches)
> + return -ENOMEM;
> +
> + for (i = 0, match = matches; i < count; i++, match++) {
> + match->name = as3711_regulator_of_names[i];
> + match->driver_data = as3711_reg_info + i;
> + }
> +
> + ret = of_regulator_match(dev->parent, regulators, matches, count);
> + if (ret < 0) {
> + dev_err(dev, "Error parsing regulator init data: %d\n", ret);
> + return ret;
> + }
> +
> + for (i = 0, match = matches; i < count; i++, match++)
> + if (match->of_node)
> + pdata->init_data[i] = match->init_data;
> +
> + return 0;
> +}
> +
> static int as3711_regulator_probe(struct platform_device *pdev)
> {
> struct as3711_regulator_pdata *pdata = dev_get_platdata(&pdev->dev);
> @@ -289,8 +342,18 @@ static int as3711_regulator_probe(struct platform_device
> *pdev)
> int ret;
> int id;
>
> - if (!pdata)
> - dev_dbg(&pdev->dev, "No platform data...\n");
> + if (!pdata) {
> + dev_err(&pdev->dev, "No platform data...\n");
> + return -ENODEV;
> + }
> +
> + if (pdev->dev.parent->of_node) {
> + ret = as3711_regulator_parse_dt(&pdev->dev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "DT parsing failed: %d\n", ret);
> + return ret;
> + }
> + }
>
> regs = devm_kzalloc(&pdev->dev, AS3711_REGULATOR_NUM *
> sizeof(struct as3711_regulator), GFP_KERNEL);
> @@ -300,7 +363,7 @@ static int as3711_regulator_probe(struct platform_device
> *pdev)
> }
>
> for (id = 0, ri = as3711_reg_info; id < AS3711_REGULATOR_NUM; ++id,
> ri++) {
> - reg_data = pdata ? pdata->init_data[id] : NULL;
> + reg_data = pdata->init_data[id];
>
> /* No need to register if there is no regulator data */
> if (!reg_data)
> diff --git a/drivers/video/backlight/as3711_bl.c
> b/drivers/video/backlight/as3711_bl.c
> index c6bc65d..90c9208 100644
> --- a/drivers/video/backlight/as3711_bl.c
> +++ b/drivers/video/backlight/as3711_bl.c
> @@ -257,6 +257,109 @@ static int as3711_bl_register(struct platform_device
> *pdev,
> return 0;
> }
>
> +static int as3711_backlight_parse_dt(struct device *dev)
> +{
> + struct as3711_bl_pdata *pdata = dev_get_platdata(dev);
> + struct device_node *bl =
> + of_find_node_by_name(dev->parent->of_node, "backlight"), *fb;
> + int ret;
> +
> + if (!bl) {
> + dev_dbg(dev, "backlight node not found\n");
> + return -ENODEV;
> + }
> +
> + fb = of_parse_phandle(bl, "su1-dev", 0);
> + if (fb) {
> + pdata->su1_fb = fb->full_name;
> +
> + ret = of_property_read_u32(bl, "su1-max-uA",
> &pdata->su1_max_uA);
> + if (pdata->su1_max_uA <= 0)
> + ret = -EINVAL;
> + if (ret < 0)
> + return ret;
> + }
> +
> + fb = of_parse_phandle(bl, "su2-dev", 0);
> + if (fb) {
> + int count = 0;
> +
> + pdata->su2_fb = fb->full_name;
> +
> + ret = of_property_read_u32(bl, "su2-max-uA",
> &pdata->su2_max_uA);
> + if (pdata->su2_max_uA <= 0)
> + ret = -EINVAL;
> + if (ret < 0)
> + return ret;
> +
> + if (of_find_property(bl, "su2-feedback-voltage", NULL)) {
> + pdata->su2_feedback = AS3711_SU2_VOLTAGE;
> + count++;
> + }
> + if (of_find_property(bl, "su2-feedback-curr1", NULL)) {
> + pdata->su2_feedback = AS3711_SU2_CURR1;
> + count++;
> + }
> + if (of_find_property(bl, "su2-feedback-curr2", NULL)) {
> + pdata->su2_feedback = AS3711_SU2_CURR2;
> + count++;
> + }
> + if (of_find_property(bl, "su2-feedback-curr3", NULL)) {
> + pdata->su2_feedback = AS3711_SU2_CURR3;
> + count++;
> + }
> + if (of_find_property(bl, "su2-feedback-curr-auto", NULL)) {
> + pdata->su2_feedback = AS3711_SU2_CURR_AUTO;
> + count++;
> + }
> + if (count != 1)
> + return -EINVAL;
> +
> + count = 0;
> + if (of_find_property(bl, "su2-fbprot-lx-sd4", NULL)) {
> + pdata->su2_fbprot = AS3711_SU2_LX_SD4;
> + count++;
> + }
> + if (of_find_property(bl, "su2-fbprot-gpio2", NULL)) {
> + pdata->su2_fbprot = AS3711_SU2_GPIO2;
> + count++;
> + }
> + if (of_find_property(bl, "su2-fbprot-gpio3", NULL)) {
> + pdata->su2_fbprot = AS3711_SU2_GPIO3;
> + count++;
> + }
> + if (of_find_property(bl, "su2-fbprot-gpio4", NULL)) {
> + pdata->su2_fbprot = AS3711_SU2_GPIO4;
> + count++;
> + }
> + if (count != 1)
> + return -EINVAL;
> +
> + count = 0;
> + if (of_find_property(bl, "su2-auto-curr1", NULL)) {
> + pdata->su2_auto_curr1 = true;
> + count++;
> + }
> + if (of_find_property(bl, "su2-auto-curr2", NULL)) {
> + pdata->su2_auto_curr2 = true;
> + count++;
> + }
> + if (of_find_property(bl, "su2-auto-curr3", NULL)) {
> + pdata->su2_auto_curr3 = true;
> + count++;
> + }
> +
> + /*
> + * At least one su2-auto-curr* must be specified iff
> + * AS3711_SU2_CURR_AUTO is used
> + */
> + if (!count ^ pdata->su2_feedback != AS3711_SU2_CURR_AUTO)
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static int as3711_backlight_probe(struct platform_device *pdev)
> {
> struct as3711_bl_pdata *pdata = dev_get_platdata(&pdev->dev);
> @@ -266,11 +369,24 @@ static int as3711_backlight_probe(struct
> platform_device *pdev)
> unsigned int max_brightness;
> int ret;
>
> - if (!pdata || (!pdata->su1_fb && !pdata->su2_fb)) {
> + if (!pdata) {
> dev_err(&pdev->dev, "No platform data, exiting...\n");
> return -ENODEV;
> }
>
> + if (pdev->dev.parent->of_node) {
> + ret = as3711_backlight_parse_dt(&pdev->dev);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "DT parsing failed: %d\n", ret);
> + return ret;
> + }
> + }
> +
> + if (!pdata->su1_fb && !pdata->su2_fb) {
> + dev_err(&pdev->dev, "No framebuffer specified\n");
> + return -EINVAL;
> + }
> +
> /*
> * Due to possible hardware damage I chose to block all modes,
> * unsupported on my hardware. Anyone, wishing to use any of those modes
> --
> 1.7.2.5
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
