3.7-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alan Stern <st...@rowland.harvard.edu>
commit ee74290b7853db9d5fd64db70e5c175241c59fba upstream.
This patch (as1652) fixes a long-standing bug in ehci-hcd. The driver
relies on status polls to know when to stop port-resume signalling.
It uses the root-hub status timer to schedule these status polls. But
when the driver for the root hub is resumed, the timer is rescheduled
to go off immediately -- before the port is ready. When this happens
the timer does not get re-enabled, which prevents the port resume from
finishing until some other event occurs.
The symptom is that when a new device is plugged in, it doesn't get
recognized or enumerated until lsusb is run or something else happens.
The solution is to re-enable the root-hub status timer after every
status poll while a port resume is in progress.
This bug hasn't surfaced before now because we never used to try to
suspend the root hub in the middle of a port resume (except by
coincidence).
Signed-off-by: Alan Stern <st...@rowland.harvard.edu>
Reported-and-tested-by: Norbert Preining <prein...@logic.at>
Tested-by: Ming Lei <ming....@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org>
---
drivers/usb/host/ehci-hub.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -623,7 +623,11 @@ ehci_hub_status_data (struct usb_hcd *hc
status = STS_PCD;
}
}
- /* FIXME autosuspend idle root hubs */
+
+ /* If a resume is in progress, make sure it can finish */
+ if (ehci->resuming_ports)
+ mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(25));
+
spin_unlock_irqrestore (&ehci->lock, flags);
return status ? retval : 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
