2.4.4-p1 is the kernel version that i've tried now. no succes with 2.4.3 and
below.

i've been trying without the CDROM and a normal HDD ata 66. i've made some
progress using the normal ide ata 66 driver and removing the osv4 from
kernel.

root@light:/# hdparm -t -T /dev/hda

/dev/hda:
 Timing buffer-cache reads:   128 MB in  0.81 seconds =158.02 MB/sec
 Timing buffered disk reads:   MB in  8.41 seconds =  7.61 MB/sec
root@light:/# hdparm -v /dev/hda

/dev/hda:
 multcount    = 16 (on)
 I/O support  =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 nowerr       =  0 (off)
 readonly     =  0 (off)
 readahead    =  8 (on)
 geometry     = 2586/240/63, sectors = 39102336, start = 0

still my bios is set to enhaced DMA. i am still working on UDMA. if u have
any suggestions i still wait for a solution.

axl

----- Original Message -----
From: "Mark Hahn" <[EMAIL PROTECTED]>
To: "Alexandru Barloiu Nicolae" <[EMAIL PROTECTED]>
Sent: Tuesday, April 10, 2001 1:39 AM
Subject: Re: Compaq proliant ML-350 - IDE & SCSI


> > ServerWorks OSB4: IDE controller on PCI bus 00 dev 79
>
> ugh.  not a widely-respected implementation.  I don't think you mentioned
> which kernel you're runnint, either, since there have been several
successive
> generations of workarounds for SW ide/etc stuff.
>
> > hda: WDC WD200EB-00BHF0, ATA DISK drive
> > hdb: Compaq CRD-8402B, ATAPI CD/DVD-ROM drive
>
> sharing a channel like this is not a good idea.  you should definitely
> test without the cdrom drive.  all your ide cables are 18" or less?
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to