On 14:14 Fri 25 Jan , Arnd Bergmann wrote:
> For the past three years, we have had a #warning in
> mach-at91 about the sdram_selfrefresh_enable or
> at91sam9_standby functions possibly not working on
> at91sam9263. In the meantime a function was added
> to do the right thing on at91sam9g45, which looks like
> it should also work on '9263.
>
> This patch blindly removes the warning and changes the
> at91sam9263 to use the same code at at91sam9g45, which
> may or may not be the right solution. If it is not,
> maybe someone could provide a better fix.
it's not
the 9g45 use DDR Controler where the 9263 use a SDRAM controler
Best Regards,
J.
>
> Signed-off-by: Arnd Bergmann <a...@arndb.de>
> Cc: Nicolas Ferre <nicolas.fe...@atmel.com>
> Cc: Jean-Christophe Plagniol-Villard <plagn...@jcrosoft.com>
> Cc: Andrew Victor <li...@maxim.org.za>
> Cc: Albin Tonnerre <albin.tonne...@free-electrons.com>
> Cc: Daniel Lezcano <daniel.lezc...@linaro.org>
> ---
> arch/arm/mach-at91/cpuidle.c | 2 +-
> arch/arm/mach-at91/pm.c | 2 +-
> arch/arm/mach-at91/pm.h | 8 --------
> 3 files changed, 2 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
> index 0c63815..208d486 100644
> --- a/arch/arm/mach-at91/cpuidle.c
> +++ b/arch/arm/mach-at91/cpuidle.c
> @@ -36,7 +36,7 @@ static int at91_enter_idle(struct cpuidle_device *dev,
> {
> if (cpu_is_at91rm9200())
> at91rm9200_standby();
> - else if (cpu_is_at91sam9g45())
> + else if (cpu_is_at91sam9g45() || cpu_is_at91sam9263())
> at91sam9g45_standby();
> else
> at91sam9_standby();
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index adb6db8..f6bd4fa 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -265,7 +265,7 @@ static int at91_pm_enter(suspend_state_t state)
> */
> if (cpu_is_at91rm9200())
> at91rm9200_standby();
> - else if (cpu_is_at91sam9g45())
> + else if (cpu_is_at91sam9g45() || cpu_is_at91sam9263())
> at91sam9g45_standby();
> else
> at91sam9_standby();
> diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
> index 38f467c..5252216 100644
> --- a/arch/arm/mach-at91/pm.h
> +++ b/arch/arm/mach-at91/pm.h
> @@ -70,14 +70,6 @@ static inline void at91sam9g45_standby(void)
> at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
> }
>
> -#ifdef CONFIG_SOC_AT91SAM9263
> -/*
> - * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
> - * handle those cases both here and in the Suspend-To-RAM support.
> - */
> -#warning Assuming EB1 SDRAM controller is *NOT* used
> -#endif
> -
> static inline void at91sam9_standby(void)
> {
> u32 saved_lpr, lpr;
> --
> 1.8.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
