>On Sun, 1 Apr 2001, Douglas Gilbert wrote:
>
>[...]
>
>> >>>>>>>>> scsihosts <<<<<<<<<<<<<
>>
>> As a boot time option try:
>> scsihosts=aic7xxx:ncr53c8xxx
>> or if you are using lilo, in /etc/lilo.conf add:
>> append="scsihosts=aic7xxx:ncr53c8xxx"
>
>that does indeed change the bus numbering. Unfortunately, even
>with this option, the first disk on the ncr controller becomes
>"/dev/sda" ...
>
>regards,
> Peter Daum
This is probably because the aic7xxx driver is not linked into
the scsi "library" for statically compiled HBA drivers. It is
linked directly into the kernel and I believe is after the scsi.a
entry on the link line. I'll look into this on monday.
--
Justin
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
