On Wed, Jan 16, 2013 at 04:36:08PM +0300, Dan Carpenter wrote:
> You've added the writes for GO7007_BOARDID_ADLINK_MPG24 but removed
> them for GO7007_BOARDID_XMEN and GO7007_BOARDID_XMEN_III. Won't
> that break those boards?
>
I don`t remove code for GO7007_BOARDID_XMEN and GO7007_BOARDID_XMEN_III.
case there are auto reusing for XMen and XMen-III:
look old code:
if ((go->board_id == GO7007_BOARDID_XMEN ||
go->board_id == GO7007_BOARDID_XMEN_III) &&
go->i2c_adapter_online) {
union i2c_smbus_data data;
/* Check to see if register 0x0A is 0x76 */
i2c_smbus_xfer(&go->i2c_adapter, 0x21, I2C_CLIENT_SCCB,
I2C_SMBUS_READ, 0x0A, I2C_SMBUS_BYTE_DATA, &data);
if (data.byte != 0x76) {
if (assume_endura) {
go->board_id = GO7007_BOARDID_ENDURA;
usb->board = board = &board_endura;
go->board_info = &board->main_info;
strncpy(go->name, "Pelco Endura",
sizeof(go->name));
} else {
u16 channel;
- /* set GPIO5 to be an output, currently low */
- go7007_write_addr(go, 0x3c82, 0x0000);
- go7007_write_addr(go, 0x3c80, 0x00df);
/* read channel number from GPIO[1:0] */
go7007_read_addr(go, 0x3c81, &channel);
channel &= 0x3;
>>> go->board_id = GO7007_BOARDID_ADLINK_MPG24;
Here any XMen or XMen-III will reassigned as Adlink-mpg24 id
so any i2c initialization will reassigned to that id and we can use that id in
init_encoder.
usb->board = board = &board_adlink_mpg24;
go->board_info = &board->main_info;
go->channel_number = channel;
snprintf(go->name, sizeof(go->name),
"Adlink PCI-MPG24, channel #%d",
channel);
}
}
}
> regards,
> dan carpenter
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
