Hi,
> > modprobe opl3sa2 io=0x538 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=0
> > isapnp=0
> It would be what you put in the io= parameter. 0x538 does *not* look
> right.
These are the sound-settings in the BIOS:
WSS I/O: 0x530
SBPro I/O: 0x220
Synth I/O: 0x388
IRQ: 5
WSS (Play) DMA: 1
WSS (Rec) DMA & SBPro-DMA: 0
Control I/O: 0x538
MPU I/O: 0x330
The BIOS does not let me modify the I/O settings for Synth, Control and MPU.
And as I said: The opl3sa2 module was working perfectly in kernel 2.2.17 with
these settings. And I wonder why the message in syslog says "0x0", no matter
what I/O address I have specified with the io= parameter.
--
Bye, K
[a735 47ec d87b 1f15 c1e9 53d3 aa03 6173 a723 e391]
(Finger [EMAIL PROTECTED] to get public key)
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
