Use the wrapper functions for getting and setting the driver data
using spi_device instead of using dev_{get|set}_drvdata with
&spi->dev, so we can directly pass a struct spi_device
Signed-off-by: Jingoo Han <jg1....@samsung.com>
---
drivers/video/backlight/s6e63m0.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/video/backlight/s6e63m0.c
b/drivers/video/backlight/s6e63m0.c
index 0969a4048..2126b96 100644
--- a/drivers/video/backlight/s6e63m0.c
+++ b/drivers/video/backlight/s6e63m0.c
@@ -793,7 +793,7 @@ static int s6e63m0_probe(struct spi_device *spi)
lcd->power = FB_BLANK_UNBLANK;
}
- dev_set_drvdata(&spi->dev, lcd);
+ spi_set_drvdata(spi, lcd);
dev_info(&spi->dev, "s6e63m0 panel driver has been probed.\n");
@@ -806,7 +806,7 @@ out_lcd_unregister:
static int s6e63m0_remove(struct spi_device *spi)
{
- struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+ struct s6e63m0 *lcd = spi_get_drvdata(spi);
s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
device_remove_file(&spi->dev, &dev_attr_gamma_table);
@@ -820,7 +820,7 @@ static int s6e63m0_remove(struct spi_device *spi)
#if defined(CONFIG_PM)
static int s6e63m0_suspend(struct spi_device *spi, pm_message_t mesg)
{
- struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+ struct s6e63m0 *lcd = spi_get_drvdata(spi);
dev_dbg(&spi->dev, "lcd->power = %d\n", lcd->power);
@@ -833,7 +833,7 @@ static int s6e63m0_suspend(struct spi_device *spi,
pm_message_t mesg)
static int s6e63m0_resume(struct spi_device *spi)
{
- struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+ struct s6e63m0 *lcd = spi_get_drvdata(spi);
lcd->power = FB_BLANK_POWERDOWN;
@@ -847,7 +847,7 @@ static int s6e63m0_resume(struct spi_device *spi)
/* Power down all displays on reboot, poweroff or halt. */
static void s6e63m0_shutdown(struct spi_device *spi)
{
- struct s6e63m0 *lcd = dev_get_drvdata(&spi->dev);
+ struct s6e63m0 *lcd = spi_get_drvdata(spi);
s6e63m0_power(lcd, FB_BLANK_POWERDOWN);
}
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
