Add device tree based discovery support for pmic block of s5m8767
Signed-off-by: Amit Daniel Kachhap <amit.dan...@samsung.com>
---
.../bindings/regulator/s5m8767-regulator.txt | 133 ++++++++++++++
drivers/mfd/sec-core.c | 75 ++++++++-
drivers/regulator/s5m8767.c | 190 +++++++++++++++++++-
include/linux/mfd/samsung/core.h | 3 +
4 files changed, 398 insertions(+), 3 deletions(-)
create mode 100644
Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
new file mode 100644
index 0000000..59c372b
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt
@@ -0,0 +1,133 @@
+* Samsung S5M8767 Voltage and Current Regulator
+
+The Samsung S5M8767 is a multi-function device which includes volatage and
+current regulators, rtc, charger controller and other sub-blocks. It is
+interfaced to the host controller using a i2c interface. Each sub-block is
+addressed by the host system using different i2c slave address. This document
+describes the bindings for 'pmic' sub-block of s5m8767.
+
+Required properties:
+- compatible: Should be "samsung,s5m8767-pmic".
+- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
+
+- s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck2 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck3 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+- s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
+ units for buck4 when changing voltage using gpio dvs. Refer to [1] below
+ for additional information.
+
+[1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage'
+ property should specify atleast one voltage level (which would be a
+ safe operating voltage).
+
+ If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
+ property is specified, then all the eigth voltage values for the
+ 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
+
+Optional properties:
+- interrupt-parent: Specifies the phandle of the interrupt controller to which
+ the interrupts from s5m8767 are delivered to.
+- interrupts: Interrupt specifiers for two interrupt sources.
+ - First interrupt specifier is for 'irq1' interrupt.
+ - Second interrupt specifier is for 'alert' interrupt.
+- s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
+- s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
+- s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
+
+Additional properties required if either of the optional properties are used:
+
+- s5m8767,pmic-buck234-default-dvs-idx: Default voltage setting selected from
+ the possible 8 options selectable by the dvs gpios. The value of this
+ property should be between 0 and 7. If not specified or if out of range, the
+ default value of this property is set to 0.
+
+- s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
+ for dvs. The format of the gpio specifier depends in the gpio controller.
+
+Regulators: The regulators of s5m8767 that have to be instantiated should be
+included in a sub-node named 'regulators'. Regulator nodes included in this
+sub-node should be of the format as listed below.
+
+ regulator_name {
+ standard regulator bindings here
+ };
+
+The following are the names of the regulators that the s5m8767 pmic block
+supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
+as per the datasheet of s5m8767.
+
+ - LDOn
+ - valid values for n are 1 to 28
+ - Example: LDO0, LD01, LDO28
+ - BUCKn
+ - valid values for n are 1 to 9.
+ - Example: BUCK1, BUCK2, BUCK9
+
+The bindings inside the regulator nodes use the standard regulator bindings
+which are documented elsewhere.
+
+Example:
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+
+ s5m8767,pmic-buck2-uses-gpio-dvs;
+ s5m8767,pmic-buck3-uses-gpio-dvs;
+ s5m8767,pmic-buck4-uses-gpio-dvs;
+
+ s5m8767,pmic-buck-default-dvs-idx = <0>;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 1 0 0>, /* DVS1 */
+ <&gpx0 1 1 0 0>, /* DVS2 */
+ <&gpx0 2 1 0 0>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 1 0 0>, /* SET1 */
+ <&gpx2 4 1 0 0>, /* SET2 */
+ <&gpx2 5 1 0 0>; /* SET3 */
+
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ABB_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_ALIVE_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VDD_MIF_1.2V";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c
index 49d361a..51de531 100644
--- a/drivers/mfd/sec-core.c
+++ b/drivers/mfd/sec-core.c
@@ -17,6 +17,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/of_irq.h>
#include <linux/interrupt.h>
#include <linux/pm_runtime.h>
#include <linux/mutex.h>
@@ -60,6 +61,15 @@ static struct mfd_cell s2mps11_devs[] = {
},
};
+#ifdef CONFIG_OF
+static struct of_device_id __devinitdata sec_dt_match[] = {
+ { .compatible = "samsung,s5m8767-pmic",
+ .data = S5M8767X,
+ },
+ {},
+};
+#endif
+
int sec_reg_read(struct sec_pmic_dev *sec_pmic, u8 reg, void *dest)
{
return regmap_read(sec_pmic->regmap, reg, dest);
@@ -95,6 +105,57 @@ static struct regmap_config sec_regmap_config = {
.val_bits = 8,
};
+
+#ifdef CONFIG_OF
+/*
+ * Only the common platform data elements for s5m8767 are parsed here from the
+ * device tree. Other sub-modules of s5m8767 such as pmic, rtc , charger and
+ * others have to parse their own platform data elements from device tree.
+ *
+ * The s5m8767 platform data structure is instantiated here and the drivers for
+ * the sub-modules need not instantiate another instance while parsing their
+ * platform data.
+ */
+static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
+ struct device *dev)
+{
+ struct sec_platform_data *pd;
+
+ pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+ if (!pd) {
+ dev_err(dev, "could not allocate memory for pdata\n");
+ return ERR_PTR(-ENOMEM);
+ }
+
+ /*
+ * ToDo: the 'wakeup' member in the platform data is more of a linux
+ * specfic information. Hence, there is no binding for that yet and
+ * not parsed here.
+ */
+
+ return pd;
+}
+#else
+static struct sec_platform_data *sec_i2c_parse_dt_pdata(
+ struct device *dev)
+{
+ return 0;
+}
+#endif
+
+static inline int sec_i2c_get_driver_data(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+#ifdef CONFIG_OF
+ if (i2c->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(sec_dt_match, i2c->dev.of_node);
+ return (int)match->data;
+ }
+#endif
+ return (int)id->driver_data;
+}
+
static int sec_pmic_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@@ -111,13 +172,22 @@ static int sec_pmic_probe(struct i2c_client *i2c,
sec_pmic->dev = &i2c->dev;
sec_pmic->i2c = i2c;
sec_pmic->irq = i2c->irq;
- sec_pmic->type = id->driver_data;
-
+ sec_pmic->type = sec_i2c_get_driver_data(i2c, id);
+
+ if (sec_pmic->dev->of_node) {
+ pdata = sec_pmic_i2c_parse_dt_pdata(sec_pmic->dev);
+ if (IS_ERR(pdata)) {
+ ret = PTR_ERR(pdata);
+ return ret;
+ }
+ pdata->device_type = sec_pmic->type;
+ }
if (pdata) {
sec_pmic->device_type = pdata->device_type;
sec_pmic->ono = pdata->ono;
sec_pmic->irq_base = pdata->irq_base;
sec_pmic->wakeup = pdata->wakeup;
+ sec_pmic->pdata = pdata;
}
sec_pmic->regmap = devm_regmap_init_i2c(i2c, &sec_regmap_config);
@@ -192,6 +262,7 @@ static struct i2c_driver sec_pmic_driver = {
.driver = {
.name = "sec_pmic",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(sec_dt_match),
},
.probe = sec_pmic_probe,
.remove = sec_pmic_remove,
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 9f991f2..fcd606d 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -14,6 +14,7 @@
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/of_gpio.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/platform_device.h>
@@ -21,6 +22,11 @@
#include <linux/regulator/machine.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s5m8767.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/io.h>
+#include <mach/map.h>
+
+#define S5M8767_OPMODE_NORMAL_MODE 0x1
struct s5m8767_info {
struct device *dev;
@@ -508,15 +514,196 @@ static struct regulator_desc regulators[] = {
s5m8767_regulator_desc(BUCK9),
};
+#ifdef CONFIG_OF
+static int s5m8767_pmic_dt_parse_dvs_gpio(struct sec_pmic_dev *iodev,
+ struct sec_platform_data *pdata,
+ struct device_node *pmic_np)
+{
+ int i, gpio;
+
+ for (i = 0; i < 3; i++) {
+ gpio = of_get_named_gpio(pmic_np,
+ "s5m8767,pmic-buck-dvs-gpios", i);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+ return -EINVAL;
+ }
+ pdata->buck_gpios[i] = gpio;
+ }
+ return 0;
+}
+
+static int s5m8767_pmic_dt_parse_ds_gpio(struct sec_pmic_dev *iodev,
+ struct sec_platform_data *pdata,
+ struct device_node *pmic_np)
+{
+ int i, gpio;
+
+ for (i = 0; i < 3; i++) {
+ gpio = of_get_named_gpio(pmic_np,
+ "s5m8767,pmic-buck-ds-gpios", i);
+ if (!gpio_is_valid(gpio)) {
+ dev_err(iodev->dev, "invalid gpio[%d]: %d\n", i, gpio);
+ return -EINVAL;
+ }
+ pdata->buck_ds[i] = gpio;
+ }
+ return 0;
+}
+
+static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev,
+ struct sec_platform_data *pdata)
+{
+ struct device_node *pmic_np, *regulators_np, *reg_np;
+ struct sec_regulator_data *rdata;
+ struct sec_opmode_data *rmode;
+ unsigned int i, dvs_voltage_nr = 1, ret;
+
+ pmic_np = iodev->dev->of_node;
+ if (!pmic_np) {
+ dev_err(iodev->dev, "could not find pmic sub-node\n");
+ return -ENODEV;
+ }
+
+ regulators_np = of_find_node_by_name(pmic_np, "regulators");
+ if (!regulators_np) {
+ dev_err(iodev->dev, "could not find regulators sub-node\n");
+ return -EINVAL;
+ }
+
+ /* count the number of regulators to be supported in pmic */
+ pdata->num_regulators = 0;
+ for_each_child_of_node(regulators_np, reg_np) {
+ pdata->num_regulators++;
+ }
+
+ rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ dev_err(iodev->dev,
+ "could not allocate memory for regulator data\n");
+ return -ENOMEM;
+ }
+
+ rmode = devm_kzalloc(iodev->dev, sizeof(*rmode) *
+ pdata->num_regulators, GFP_KERNEL);
+ if (!rdata) {
+ dev_err(iodev->dev,
+ "could not allocate memory for regulator mode\n");
+ return -ENOMEM;
+ }
+
+
+ pdata->regulators = rdata;
+ pdata->opmode = rmode;
+ for_each_child_of_node(regulators_np, reg_np) {
+ for (i = 0; i < ARRAY_SIZE(regulators); i++)
+ if (!of_node_cmp(reg_np->name, regulators[i].name))
+ break;
+
+ if (i == ARRAY_SIZE(regulators)) {
+ dev_warn(iodev->dev,
+ "don't know how to configure regulator %s\n",
+ reg_np->name);
+ continue;
+ }
+
+ rdata->id = i;
+ rdata->initdata = of_get_regulator_init_data(
+ iodev->dev, reg_np);
+ rdata->reg_node = reg_np;
+ rdata++;
+ rmode->id = i;
+ if (of_property_read_u32(reg_np, "op_mode",
+ &rmode->mode)) {
+ dev_warn(iodev->dev, "no op_mode property property at
%s\n",
+ reg_np->full_name);
+
+ rmode->mode = S5M8767_OPMODE_NORMAL_MODE;
+ }
+ rmode++;
+ }
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck2-uses-gpio-dvs", NULL))
+ pdata->buck2_gpiodvs = true;
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck3-uses-gpio-dvs", NULL))
+ pdata->buck3_gpiodvs = true;
+
+ if (of_get_property(pmic_np, "s5m8767,pmic-buck4-uses-gpio-dvs", NULL))
+ pdata->buck4_gpiodvs = true;
+
+ if (pdata->buck2_gpiodvs || pdata->buck3_gpiodvs ||
+ pdata->buck4_gpiodvs) {
+ ret = s5m8767_pmic_dt_parse_dvs_gpio(iodev, pdata, pmic_np);
+ if (ret)
+ return -EINVAL;
+
+ if (of_property_read_u32(pmic_np,
+ "s5m8767,pmic-buck-default-dvs-idx",
+ &pdata->buck_default_idx)) {
+ pdata->buck_default_idx = 0;
+ } else {
+ if (pdata->buck_default_idx >= 8) {
+ pdata->buck_default_idx = 0;
+ dev_info(iodev->dev,
+ "invalid value for default dvs index, use 0\n");
+ }
+ }
+
+ dvs_voltage_nr = 8;
+ }
+
+ ret = s5m8767_pmic_dt_parse_ds_gpio(iodev, pdata, pmic_np);
+ if (ret)
+ return -EINVAL;
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck2-dvs-voltage",
+ pdata->buck2_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck2 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck3-dvs-voltage",
+ pdata->buck3_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck3 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_array(pmic_np,
+ "s5m8767,pmic-buck4-dvs-voltage",
+ pdata->buck4_voltage, dvs_voltage_nr)) {
+ dev_err(iodev->dev, "buck4 voltages not specified\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#else
+static int s5m8767_pmic_dt_parse_pdata(struct sec_pmic_dev *iodev,
+ struct sec_platform_data *pdata)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
static int s5m8767_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct sec_platform_data *pdata = iodev->pdata;
struct regulator_config config = { };
struct regulator_dev **rdev;
struct s5m8767_info *s5m8767;
int i, ret, size, buck_init;
+ if (iodev->dev->of_node) {
+ ret = s5m8767_pmic_dt_parse_pdata(iodev, pdata);
+ if (ret)
+ return ret;
+ }
+
if (!pdata) {
dev_err(pdev->dev.parent, "Platform data not supplied\n");
return -ENODEV;
@@ -765,6 +952,7 @@ static int s5m8767_pmic_probe(struct platform_device *pdev)
config.dev = s5m8767->dev;
config.init_data = pdata->regulators[i].initdata;
config.driver_data = s5m8767;
+ config.of_node = pdata->regulators[i].reg_node;
rdev[i] = regulator_register(®ulators[id], &config);
if (IS_ERR(rdev[i])) {
diff --git a/include/linux/mfd/samsung/core.h b/include/linux/mfd/samsung/core.h
index b50c38f..380ed95 100644
--- a/include/linux/mfd/samsung/core.h
+++ b/include/linux/mfd/samsung/core.h
@@ -26,6 +26,7 @@ enum sec_device_type {
/**
* struct sec_pmic_dev - s5m87xx master device for sub-drivers
* @dev: master device of the chip (can be used to access platform data)
+ * @pdata: pointer to private data used to pass platform data to child
* @i2c: i2c client private data for regulator
* @rtc: i2c client private data for rtc
* @iolock: mutex for serializing io access
@@ -39,6 +40,7 @@ enum sec_device_type {
*/
struct sec_pmic_dev {
struct device *dev;
+ struct sec_platform_data *pdata;
struct regmap *regmap;
struct i2c_client *i2c;
struct i2c_client *rtc;
@@ -127,6 +129,7 @@ struct sec_platform_data {
struct sec_regulator_data {
int id;
struct regulator_init_data *initdata;
+ struct device_node *reg_node;
};
/*
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
