Jeff Garzik <[EMAIL PROTECTED]> écrit :
> You should use this patch instead, from Alan's tree, for updating
> include/linux/if_arp.h...
It adds confusion: do you imagine the poor soul who discovers hdlc in Linux
and sees ARPHRD_CISCO and ARPHRD_HDLC for the same use after some hours
of code-greping (both will be used at the moment if hdlc.c do so) ?
Don't be surprised if he ends using label pointers everywhere. :o)
What about the following (2.5 ?):
diff -u -N --recursive linux-2.4.3-pre6.orig/drivers/net/wan/comx-proto-ppp.c
linux-2.4.3-pre6/drivers/net/wan/comx-proto-ppp.c
--- linux-2.4.3-pre6.orig/drivers/net/wan/comx-proto-ppp.c Wed Mar 21 10:56:18
2001
+++ linux-2.4.3-pre6/drivers/net/wan/comx-proto-ppp.c Wed Mar 21 14:26:37 2001
@@ -208,7 +208,7 @@
if(ch->protocol == &hdlc_protocol) {
pppdev->sppp.pp_flags |= PP_CISCO;
- dev->type = ARPHRD_HDLC;
+ dev->type = ARPHRD_CISCO;
} else {
pppdev->sppp.pp_flags &= ~PP_CISCO;
dev->type = ARPHRD_PPP;
diff -u -N --recursive linux-2.4.3-pre6.orig/drivers/net/wan/lmc/lmc_main.c
linux-2.4.3-pre6/drivers/net/wan/lmc/lmc_main.c
--- linux-2.4.3-pre6.orig/drivers/net/wan/lmc/lmc_main.c Wed Mar 21 10:56:18
2001
+++ linux-2.4.3-pre6/drivers/net/wan/lmc/lmc_main.c Wed Mar 21 14:25:55 2001
@@ -74,7 +74,7 @@
#include <asm/uaccess.h>
//#include <asm/spinlock.h>
#else /* 2.0 kernel */
-#define ARPHRD_HDLC 513
+#define ARPHRD_CISCO 513
#endif
#include <linux/module.h>
@@ -900,7 +900,7 @@
/* Just fill in the entries for the device */
dev->init = lmc_init;
- dev->type = ARPHRD_HDLC;
+ dev->type = ARPHRD_CISCO;
dev->hard_start_xmit = lmc_start_xmit;
dev->open = lmc_open;
dev->stop = lmc_close;
diff -u -N --recursive linux-2.4.3-pre6.orig/drivers/net/wan/syncppp.c
linux-2.4.3-pre6/drivers/net/wan/syncppp.c
--- linux-2.4.3-pre6.orig/drivers/net/wan/syncppp.c Wed Mar 21 10:56:18 2001
+++ linux-2.4.3-pre6/drivers/net/wan/syncppp.c Wed Mar 21 14:23:54 2001
@@ -964,7 +964,7 @@
{
case SPPPIOCCISCO:
sp->pp_flags|=PP_CISCO;
- dev->type = ARPHRD_HDLC;
+ dev->type = ARPHRD_CISCO;
break;
case SPPPIOCPPP:
sp->pp_flags&=~PP_CISCO;
@@ -1031,7 +1031,7 @@
dev->hard_header = sppp_hard_header;
dev->rebuild_header = sppp_rebuild_header;
dev->tx_queue_len = 10;
- dev->type = ARPHRD_HDLC;
+ dev->type = ARPHRD_CISCO;
dev->addr_len = 0;
dev->hard_header_len = sizeof(struct ppp_header);
dev->mtu = PPP_MTU;
diff -u -N --recursive linux-2.4.3-pre6.orig/drivers/net/wan/z85230.c
linux-2.4.3-pre6/drivers/net/wan/z85230.c
--- linux-2.4.3-pre6.orig/drivers/net/wan/z85230.c Wed Mar 21 10:56:18 2001
+++ linux-2.4.3-pre6/drivers/net/wan/z85230.c Wed Mar 21 14:24:30 2001
@@ -471,7 +471,7 @@
printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3]|RxENABLE);
if(chan->netdevice &&
- ((chan->netdevice->type == ARPHRD_HDLC) ||
+ ((chan->netdevice->type == ARPHRD_CISCO) ||
(chan->netdevice->type == ARPHRD_PPP)))
sppp_reopen(chan->netdevice);
}
@@ -590,7 +590,7 @@
printk(KERN_INFO "%s: DCD raised\n", chan->dev->name);
write_zsreg(chan, R3, chan->regs[3]|RxENABLE);
if(chan->netdevice &&
- ((chan->netdevice->type == ARPHRD_HDLC) ||
+ ((chan->netdevice->type == ARPHRD_CISCO) ||
(chan->netdevice->type == ARPHRD_PPP)))
sppp_reopen(chan->netdevice);
}
diff -u -N --recursive linux-2.4.3-pre6.orig/include/linux/if_arp.h
linux-2.4.3-pre6/include/linux/if_arp.h
--- linux-2.4.3-pre6.orig/include/linux/if_arp.h Thu Jan 4 22:51:20 2001
+++ linux-2.4.3-pre6/include/linux/if_arp.h Wed Mar 21 14:19:21 2001
@@ -50,9 +50,10 @@
#define ARPHRD_X25 271 /* CCITT X.25 */
#define ARPHRD_HWX25 272 /* Boards with X.25 in firmware */
#define ARPHRD_PPP 512
-#define ARPHRD_HDLC 513 /* (Cisco) HDLC */
+#define ARPHRD_CISCO 513 /* (Cisco) HDLC */
#define ARPHRD_LAPB 516 /* LAPB */
#define ARPHRD_DDCMP 517 /* Digital's DDCMP protocol */
+#define ARPHRD_RAWHDLC 518 /* Raw HDLC */
#define ARPHRD_TUNNEL 768 /* IPIP tunnel */
#define ARPHRD_TUNNEL6 769 /* IPIP6 tunnel */
--
Ueimor
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
