Hi,

On 11/28/2012 08:27 PM, Rajanikanth H.V wrote:
> From: "Rajanikanth H.V" <rajanikanth...@stericsson.com>
> 
> property, battery-type shall be one of supported technology type
> instead blank
> - refer: Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
>       for the list supported types
> - this patch appends to ab8500 bm devs DT binding patch set
>       ref: commit-id e0f1abeba5c2d8a2183566717d99294fd1a29c2e
>               git://git.infradead.org/battery-2.6.git
> - promote ab8500_fg probe to happen before ab8500_btemp probe as
>       btemp driver depends on fuelgauge list,
>       ref: ab8500_fg_get(...)
> 
> Signed-off-by: Rajanikanth H.V <rajanikanth...@stericsson.com>
> ---
>  drivers/power/Makefile        |    2 +-
>  drivers/power/ab8500_bmdata.c |   10 +++-------
>  2 files changed, 4 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/power/Makefile b/drivers/power/Makefile
> index 696e3a9..070c73d 100644
> --- a/drivers/power/Makefile
> +++ b/drivers/power/Makefile
> @@ -38,7 +38,7 @@ obj-$(CONFIG_CHARGER_PCF50633)      += pcf50633-charger.o
>  obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
>  obj-$(CONFIG_BATTERY_INTEL_MID)      += intel_mid_battery.o
>  obj-$(CONFIG_BATTERY_RX51)   += rx51_battery.o
> -obj-$(CONFIG_AB8500_BM)              += ab8500_bmdata.o ab8500_charger.o 
> ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
> +obj-$(CONFIG_AB8500_BM)              += ab8500_bmdata.o ab8500_charger.o 
> ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
>  obj-$(CONFIG_CHARGER_ISP1704)        += isp1704_charger.o
>  obj-$(CONFIG_CHARGER_MAX8903)        += max8903_charger.o
>  obj-$(CONFIG_CHARGER_TWL4030)        += twl4030_charger.o
> diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
> index 03cc528..f16b60c 100644
> --- a/drivers/power/ab8500_bmdata.c
> +++ b/drivers/power/ab8500_bmdata.c
> @@ -461,7 +461,6 @@ bmdevs_of_probe(struct device *dev,
>       struct  device_node *np_bat_supply;
>       struct  abx500_bm_data *bat;
>       const char *btech;
> -     char bat_tech[8];
>       int i, thermistor;
>  
>       *battery = &ab8500_bm_data;
> @@ -488,12 +487,9 @@ bmdevs_of_probe(struct device *dev,
>               "stericsson,battery-type", NULL);
>       if (!btech) {
>               dev_warn(dev, "missing property battery-name/type\n");
> -             strcpy(bat_tech, "UNKNOWN");
> -     } else {
> -             strcpy(bat_tech, btech);
> +             return -EINVAL;

Before returning, of_node_put() should be called on the device node.

--
Francesco
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to