On Thu, 29 Nov 2012, Lee Jones wrote:
> On Thu, 29 Nov 2012, Viresh Kumar wrote:
>
> > From: Vipul Kumar Samar <vipulkumar.sa...@st.com>
> >
> > This patch extends existing DT support for stmpe devices. This updates:
> > - DT support from stmpe SPI and I2C drivers
> > - missing header files in stmpe.c
> > - stmpe_of_probe() with pwm, rotator and new bindings.
> > - Bindings are updated in binding document.
> >
> > Signed-off-by: Vipul Kumar Samar <vipulkumar.sa...@st.com>
> > Signed-off-by: Viresh Kumar <viresh.ku...@linaro.org>
> > ---
> > V3->V4:
> > - Remove need to pass irq type and polarity from DT.
> > - Remove need to pass id from platform data.
> >
> > Documentation/devicetree/bindings/mfd/stmpe.txt | 9 ++++++---
> > drivers/mfd/stmpe-i2c.c | 15 +++++++++++++++
> > drivers/mfd/stmpe-spi.c | 15 +++++++++++++++
> > drivers/mfd/stmpe.c | 22 ++++++++++++++++------
> > 4 files changed, 52 insertions(+), 9 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/stmpe.txt
> > b/Documentation/devicetree/bindings/mfd/stmpe.txt
> > index 8f0aeda..d2d88d9 100644
> > --- a/Documentation/devicetree/bindings/mfd/stmpe.txt
> > +++ b/Documentation/devicetree/bindings/mfd/stmpe.txt
> > @@ -1,8 +1,11 @@
> > -* STMPE Multi-Functional Device
> > +* ST Microelectronics STMPE Multi-Functional Device
> > +
> > +STMPE is an MFD device which may expose following inbuilt devices: gpio,
> > keypad,
> > +touchscreen, adc, pwm, rotator.
> >
> > Required properties:
> > - - compatible : "st,stmpe[811|1601|2401|2403]"
> > - - reg : I2C address of the device
> > + - compatible : "st,stmpe[610|801|811|1601|2401|2403]"
> > + - reg : I2C/SPI address of the device
> >
> > Optional properties:
> > - interrupts : The interrupt outputs from the controller
> > diff --git a/drivers/mfd/stmpe-i2c.c b/drivers/mfd/stmpe-i2c.c
> > index c734dc3..003c49b 100644
> > --- a/drivers/mfd/stmpe-i2c.c
> > +++ b/drivers/mfd/stmpe-i2c.c
> > @@ -13,6 +13,7 @@
> > #include <linux/interrupt.h>
> > #include <linux/kernel.h>
> > #include <linux/module.h>
> > +#include <linux/of.h>
> > #include <linux/types.h>
> > #include "stmpe.h"
> >
> > @@ -81,6 +82,19 @@ static const struct i2c_device_id stmpe_i2c_id[] = {
> > };
> > MODULE_DEVICE_TABLE(i2c, stmpe_id);
> >
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id stmpe_dt_ids[] = {
> > + { .compatible = "st,stmpe610", .data = &stmpe_i2c_id[0], },
> > + { .compatible = "st,stmpe801", .data = &stmpe_i2c_id[1], },
> > + { .compatible = "st,stmpe811", .data = &stmpe_i2c_id[2], },
> > + { .compatible = "st,stmpe1601", .data = &stmpe_i2c_id[3], },
> > + { .compatible = "st,stmpe2401", .data = &stmpe_i2c_id[4], },
> > + { .compatible = "st,stmpe2403", .data = &stmpe_i2c_id[5], },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, stmpe_dt_ids);
> > +#endif
> > +
> > static struct i2c_driver stmpe_i2c_driver = {
> > .driver = {
> > .name = "stmpe-i2c",
> > @@ -88,6 +102,7 @@ static struct i2c_driver stmpe_i2c_driver = {
> > #ifdef CONFIG_PM
> > .pm = &stmpe_dev_pm_ops,
> > #endif
> > + .of_match_table = of_match_ptr(stmpe_dt_ids),
> > },
> > .probe = stmpe_i2c_probe,
> > .remove = __devexit_p(stmpe_i2c_remove),
> > diff --git a/drivers/mfd/stmpe-spi.c b/drivers/mfd/stmpe-spi.c
> > index 9edfe86..1e2bff0 100644
> > --- a/drivers/mfd/stmpe-spi.c
> > +++ b/drivers/mfd/stmpe-spi.c
> > @@ -11,6 +11,7 @@
> > #include <linux/interrupt.h>
> > #include <linux/kernel.h>
> > #include <linux/module.h>
> > +#include <linux/of.h>
> > #include <linux/types.h>
> > #include "stmpe.h"
> >
> > @@ -119,6 +120,19 @@ static const struct spi_device_id stmpe_spi_id[] = {
> > };
> > MODULE_DEVICE_TABLE(spi, stmpe_id);
> >
> > +#ifdef CONFIG_OF
> > +static const struct of_device_id stmpe_dt_ids[] = {
> > + { .compatible = "st,stmpe610", .data = (void *)STMPE610, },
> > + { .compatible = "st,stmpe801", .data = (void *)STMPE801, },
> > + { .compatible = "st,stmpe811", .data = (void *)STMPE811, },
> > + { .compatible = "st,stmpe1601", .data = (void *)STMPE1601, },
> > + { .compatible = "st,stmpe2401", .data = (void *)STMPE2401, },
> > + { .compatible = "st,stmpe2403", .data = (void *)STMPE2403, },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, stmpe_dt_ids);
> > +#endif
> > +
> > static struct spi_driver stmpe_spi_driver = {
> > .driver = {
> > .name = "stmpe-spi",
> > @@ -126,6 +140,7 @@ static struct spi_driver stmpe_spi_driver = {
> > #ifdef CONFIG_PM
> > .pm = &stmpe_dev_pm_ops,
> > #endif
> > + .of_match_table = of_match_ptr(stmpe_dt_ids),
> > },
> > .probe = stmpe_spi_probe,
> > .remove = __devexit_p(stmpe_spi_remove),
> > diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
> > index 10819e6..88cd8e5 100644
> > --- a/drivers/mfd/stmpe.c
> > +++ b/drivers/mfd/stmpe.c
> > @@ -7,12 +7,15 @@
> > * Author: Rabin Vincent <rabin.vinc...@stericsson.com> for ST-Ericsson
> > */
> >
> > +#include <linux/err.h>
> > #include <linux/gpio.h>
> > #include <linux/export.h>
> > #include <linux/kernel.h>
> > #include <linux/interrupt.h>
> > #include <linux/irq.h>
> > #include <linux/irqdomain.h>
> > +#include <linux/of.h>
> > +#include <linux/of_gpio.h>
> > #include <linux/pm.h>
> > #include <linux/slab.h>
> > #include <linux/mfd/core.h>
> > @@ -1021,6 +1024,12 @@ void __devinit stmpe_of_probe(struct
> > stmpe_platform_data *pdata,
> > {
> > struct device_node *child;
> >
> > + /*
> > + * Distinct names of same cell-type within multiple instances of stmpe
> > + * will be guaranteed by DT.
> > + */
> > + pdata->id = -1;
>
> And what if we're not booting with DT?
Ah, we're in *_of_probe(), ignore this.
Instead:
Acked-by: Lee Jones <lee.jo...@linaro.org>
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
