Subject: [PATCH 3.6.6 2/3] i82975x_edac: fix format problems
This patch fixes format errors and warnings like long lines.
Also, adds defines for previously hardcoded constants.
Signed-off-by: Arvind R. <arvin...@gmail.com>
---
drivers/edac/i82975x_edac.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)
diff -up a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c
--- a/drivers/edac/i82975x_edac.c 2012-11-22 11:55:39.000000000 +0530
+++ b/drivers/edac/i82975x_edac.c 2012-11-22 11:56:36.000000000 +0530
@@ -48,7 +48,7 @@
#define I82975X_DES 0x5d /* Dram ERRor DeSTination (8b)
* 0h: Processor Memory Reads
* 1h:7h reserved
- * More - See Page 65 of Intel DocSheet.
+ * More - See Page 65 of DocSheet.
*/
#define I82975X_ERRSTS 0xc8 /* Error Status Register (16b)
@@ -62,6 +62,8 @@
* 1 ECC UE (multibit DRAM error)
* 0 ECC CE (singlebit DRAM error)
*/
+#define I82975X_ERRSTS_CE 1
+#define I82975X_ERRSTS_UE 2
/* Error Reporting is supported by 3 mechanisms:
1. DMI SERR generation ( ERRCMD )
@@ -98,7 +100,7 @@ NOTE: Only ONE of the three must be enab
#define I82975X_XEAP 0xfc /* Extended Dram Error Address Pointer (8b)
*
* 7:1 reserved
- * 0 Bit32 of the Dram Error Address
+ * 0 Bit32 of Dram Error Address
*/
#define I82975X_MCHBAR 0x44 /*
@@ -203,7 +205,7 @@ NOTE: Only ONE of the three must be enab
#define I82975X_DRC_CH1M1 0x1A4
enum i82975x_chips {
- I82975X = 0,
+ I82975X_chip0 = 0,
};
struct i82975x_pvt {
@@ -225,7 +227,7 @@ struct i82975x_error_info {
};
static const struct i82975x_dev_info i82975x_devs[] = {
- [I82975X] = {
+ [I82975X_chip0] = {
.ctl_name = "i82975x"
},
};
@@ -255,7 +257,9 @@ static void i82975x_get_error_info(struc
pci_read_config_byte(pdev, I82975X_DERRSYN, &info->derrsyn);
pci_read_config_word(pdev, I82975X_ERRSTS, &info->errsts2);
- pci_write_bits16(pdev, I82975X_ERRSTS, 0x0003, 0x0003);
+ pci_write_bits16(pdev, I82975X_ERRSTS,
+ I82975X_ERRSTS_UE | I82975X_ERRSTS_CE,
+ I82975X_ERRSTS_UE | I82975X_ERRSTS_CE);
/*
* If the error is the same then we can for both reads then
@@ -263,10 +267,11 @@ static void i82975x_get_error_info(struc
* there is a CE no info and the second set of reads is valid
* and should be UE info.
*/
- if (!(info->errsts2 & 0x0003))
+ if (!(info->errsts2 & (I82975X_ERRSTS_UE | I82975X_ERRSTS_CE)))
return;
- if ((info->errsts ^ info->errsts2) & 0x0003) {
+ if ((info->errsts ^ info->errsts2) &
+ (I82975X_ERRSTS_UE | I82975X_ERRSTS_CE)) {
pci_read_config_dword(pdev, I82975X_EAP, &info->eap);
pci_read_config_byte(pdev, I82975X_XEAP, &info->xeap);
pci_read_config_byte(pdev, I82975X_DES, &info->des);
@@ -278,16 +283,18 @@ static void i82975x_get_error_info(struc
static int i82975x_process_error_info(struct mem_ctl_info *mci,
struct i82975x_error_info *info, int handle_errors)
{
+ enum hw_event_mc_err_type err_type;
int row, chan;
unsigned long offst, page;
- if (!(info->errsts2 & 0x0003))
+ if (!(info->errsts2 & (I82975X_ERRSTS_UE | I82975X_ERRSTS_CE)))
return 0;
if (!handle_errors)
return 1;
- if ((info->errsts ^ info->errsts2) & 0x0003) {
+ if ((info->errsts ^ info->errsts2) &
+ (I82975X_ERRSTS_UE | I82975X_ERRSTS_CE)) {
edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0,
-1, -1, -1, "UE overwrote CE", "");
info->errsts = info->errsts2;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
