If you were going to shoot me for not sending these earlier, you would be right. -rc6 beat me by ~2 hours it seems, and they really should have gone out to libata-dev.git and you long before that.
These have been in libata-dev.git for a day or so (unfortunately linux-next is on vacation). The main one is #1, with the others being minor bits. #1 has multiple tested-by, and can be considered a regression fix IMO. 1) Fix ACPI oops, https://bugzilla.kernel.org/show_bug.cgi?id=48211 2) Temporary WARN_ONCE() debugging patch for further ACPI debugging. The code already oopses here, and so this merely gives slightly better info. Related to https://bugzilla.kernel.org/show_bug.cgi?id=49151 which has been bisected down to a patch that _exposes_ a latent bug, but said bisection target does not actually appear to be the root cause itself. 3) sata_svw: fix longstanding error recovery bug, which was preventing kdump, by adding missing DMA-start bit check. Core code was already checking DMA-start, but ancillary, less-used routines were not. Fixed. 4) sata_highbank: fix minor __init/__devinit warning 5) Fix minor warning, if CONFIG_PM is set, but CONFIG_PM_SLEEP is not set 6) pata_arasan: proper functioning requires clock setting Please pull 29448ec129c5c9c7ece2ef28c72a0dafd70c8af2 from git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git tags/upstream-linus to receive the following updates: drivers/ata/ahci_platform.c | 2 +- drivers/ata/libata-acpi.c | 11 ++++++++--- drivers/ata/libata-core.c | 4 ++++ drivers/ata/pata_arasan_cf.c | 8 +++++++- drivers/ata/sata_highbank.c | 4 ++-- drivers/ata/sata_svw.c | 35 +++++++++++++++++++++++++++++++++++ 6 files changed, 57 insertions(+), 7 deletions(-) Aaron Lu (1): libata-acpi: Fix NULL ptr derference in ata_acpi_dev_handle Arnd Bergmann (1): sata_highbank: mark ahci_highbank_probe as __devinit Borislav Petkov (1): libata debugging: Warn when unable to find timing descriptor based on xfer_mode David Milburn (1): sata_svw: check DMA start bit before reset Vipul Kumar Samar (1): pata_arasan: Initialize cf clock to 166MHz Yuanhan Liu (1): [libata] PM callbacks should be conditionally compiled on CONFIG_PM_SLEEP diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index b1ae480..b7078af 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -238,7 +238,7 @@ static int __devexit ahci_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ahci_suspend(struct device *dev) { struct ahci_platform_data *pdata = dev_get_platdata(dev); diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index fd9ecf7..5b0ba3f 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -1105,10 +1105,15 @@ static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev, struct acpi_device *acpi_dev; struct acpi_device_power_state *states; - if (ap->flags & ATA_FLAG_ACPI_SATA) - ata_dev = &ap->link.device[sdev->channel]; - else + if (ap->flags & ATA_FLAG_ACPI_SATA) { + if (!sata_pmp_attached(ap)) + ata_dev = &ap->link.device[sdev->id]; + else + ata_dev = &ap->pmp_link[sdev->channel].device[sdev->id]; + } + else { ata_dev = &ap->link.device[sdev->id]; + } *handle = ata_dev_acpi_handle(ata_dev); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3cc7096..f46fbd3 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2942,6 +2942,10 @@ const struct ata_timing *ata_timing_find_mode(u8 xfer_mode) if (xfer_mode == t->mode) return t; + + WARN_ONCE(true, "%s: unable to find timing for xfer_mode 0x%x\n", + __func__, xfer_mode); + return NULL; } diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index 26201eb..371fd2c 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -317,6 +317,12 @@ static int cf_init(struct arasan_cf_dev *acdev) return ret; } + ret = clk_set_rate(acdev->clk, 166000000); + if (ret) { + dev_warn(acdev->host->dev, "clock set rate failed"); + return ret; + } + spin_lock_irqsave(&acdev->host->lock, flags); /* configure CF interface clock */ writel((pdata->cf_if_clk <= CF_IF_CLK_200M) ? pdata->cf_if_clk : @@ -908,7 +914,7 @@ static int __devexit arasan_cf_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int arasan_cf_suspend(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index 0d7c4c2..400bf1c 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -260,7 +260,7 @@ static const struct of_device_id ahci_of_match[] = { }; MODULE_DEVICE_TABLE(of, ahci_of_match); -static int __init ahci_highbank_probe(struct platform_device *pdev) +static int __devinit ahci_highbank_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; @@ -378,7 +378,7 @@ static int __devexit ahci_highbank_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ahci_highbank_suspend(struct device *dev) { struct ata_host *host = dev_get_drvdata(dev); diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 44a4256..08608de 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -142,6 +142,39 @@ static int k2_sata_scr_write(struct ata_link *link, return 0; } +static int k2_sata_softreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + u8 dmactl; + void __iomem *mmio = link->ap->ioaddr.bmdma_addr; + + dmactl = readb(mmio + ATA_DMA_CMD); + + /* Clear the start bit */ + if (dmactl & ATA_DMA_START) { + dmactl &= ~ATA_DMA_START; + writeb(dmactl, mmio + ATA_DMA_CMD); + } + + return ata_sff_softreset(link, class, deadline); +} + +static int k2_sata_hardreset(struct ata_link *link, + unsigned int *class, unsigned long deadline) +{ + u8 dmactl; + void __iomem *mmio = link->ap->ioaddr.bmdma_addr; + + dmactl = readb(mmio + ATA_DMA_CMD); + + /* Clear the start bit */ + if (dmactl & ATA_DMA_START) { + dmactl &= ~ATA_DMA_START; + writeb(dmactl, mmio + ATA_DMA_CMD); + } + + return sata_sff_hardreset(link, class, deadline); +} static void k2_sata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { @@ -346,6 +379,8 @@ static struct scsi_host_template k2_sata_sht = { static struct ata_port_operations k2_sata_ops = { .inherits = &ata_bmdma_port_ops, + .softreset = k2_sata_softreset, + .hardreset = k2_sata_hardreset, .sff_tf_load = k2_sata_tf_load, .sff_tf_read = k2_sata_tf_read, .sff_check_status = k2_stat_check_status, -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
