On 10/25/2012 9:41 PM, Murali Karicheri wrote:
> pll dividers are present in the pll controller of DaVinci and Other
> SoCs that re-uses the same hardware IP. This has a enable bit for
> bypass the divider or enable the driver. This is a sub class of the
> clk-divider clock checks the enable bit to calculare the rate and
> invoke the recalculate() function of the clk-divider if enabled.
>
> Signed-off-by: Murali Karicheri <m-kariche...@ti.com>
> ---
> drivers/clk/davinci/clk-div.c | 124
> +++++++++++++++++++++++++++++++++++++++++
> drivers/clk/davinci/clk-div.h | 42 ++++++++++++++
> 2 files changed, 166 insertions(+)
> create mode 100644 drivers/clk/davinci/clk-div.c
> create mode 100644 drivers/clk/davinci/clk-div.h
>
> diff --git a/drivers/clk/davinci/clk-div.c b/drivers/clk/davinci/clk-div.c
> new file mode 100644
> index 0000000..8147d99
> --- /dev/null
> +++ b/drivers/clk/davinci/clk-div.c
> @@ -0,0 +1,124 @@
> +/*
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright 2012 Texas instuments
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
incomplete sentence.
> +/**
> + * clk_register_davinci_plldiv - register function for DaVinci PLL divider
> clk
> + *
> + * @dev: device ptr
> + * @name: name of the clock
> + * @parent_name: name of parent clock
> + * @plldiv_data: ptr to pll divider data
> + * @lock: ptr to spinlock passed to divider clock
> + */
> +struct clk *clk_register_davinci_plldiv(struct device *dev,
Why do you need a dev pointer here and which device does it point to? In
the only usage of this API in the series, you pass a NULL here. I should
have probably asked this question on one of the earlier patches itself.
> + const char *name, const char *parent_name,
> + struct clk_plldiv_data *plldiv_data,
> + spinlock_t *lock)
> +{
> + struct clk_div *div;
> + struct clk *clk;
> + struct clk_init_data init;
> +
> + div = kzalloc(sizeof(*div), GFP_KERNEL);
> + if (!div)
> + return ERR_PTR(-ENOMEM);
> +
> + init.name = name;
> + init.ops = &clk_div_ops;
> + init.flags = plldiv_data->flags;
> + init.parent_names = (parent_name ? &parent_name : NULL);
> + init.num_parents = (parent_name ? 1 : 0);
> +
> + div->reg = plldiv_data->reg;
> + div->en_id = plldiv_data->en_id;
> +
> + div->divider.reg = plldiv_data->reg;
> + div->divider.shift = plldiv_data->shift;
> + div->divider.width = plldiv_data->width;
> + div->divider.flags = plldiv_data->divider_flags;
> + div->divider.lock = lock;
> + div->divider.hw.init = &init;
> + div->ops = &clk_divider_ops;
> +
> + clk = clk_register(NULL, &div->divider.hw);
Shouldn't you be calling clk_register_divider() here which in turn will
do clk_register()?
Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
