This config item has not carried much meaning for a while now and is
almost always enabled by default. As agreed during the Linux kernel
summit, remove it.
CC: Chris Ball <c...@laptop.org>
CC: Sascha Hauer <s.ha...@pengutronix.de>
CC: Fabio Estevam <fabio.este...@freescale.com>
CC: Manuel Lauss <manuel.la...@googlemail.com>
CC: Wim Van Sebroeck <w...@iguana.be>
Signed-off-by: Kees Cook <keesc...@chromium.org>
---
drivers/mmc/host/Kconfig | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 9bf10e7..576fdab 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -69,7 +69,7 @@ config MMC_SDHCI_PCI
If unsure, say N.
config MMC_RICOH_MMC
- bool "Ricoh MMC Controller Disabler (EXPERIMENTAL)"
+ bool "Ricoh MMC Controller Disabler"
depends on MMC_SDHCI_PCI
help
This adds a pci quirk to disable Ricoh MMC Controller. This
@@ -174,9 +174,6 @@ config MMC_SDHCI_S3C
often referrered to as the HSMMC block in some of the Samsung S3C
range of SoC.
- Note, due to the problems with DMA, the DMA support is only
- available with CONFIG_EXPERIMENTAL is selected.
-
If you have a controller with this interface, say Y or M here.
If unsure, say N.
@@ -221,7 +218,7 @@ config MMC_SDHCI_SPEAR
config MMC_SDHCI_S3C_DMA
bool "DMA support on S3C SDHCI"
- depends on MMC_SDHCI_S3C && EXPERIMENTAL
+ depends on MMC_SDHCI_S3C
help
Enable DMA support on the Samsung S3C SDHCI glue. The DMA
has proved to be problematic if the controller encounters
@@ -338,8 +335,8 @@ config MMC_MXS
If unsure, say N.
config MMC_TIFM_SD
- tristate "TI Flash Media MMC/SD Interface support (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI
+ tristate "TI Flash Media MMC/SD Interface support"
+ depends on PCI
select TIFM_CORE
help
Say Y here if you want to be able to access MMC/SD cards with
@@ -418,8 +415,7 @@ config MMC_S3C_PIO
the S3C MCI driver.
config MMC_S3C_DMA
- bool "Use DMA transfers only (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Use DMA transfers only"
help
Use DMA to transfer data between memory and the hardare.
@@ -428,7 +424,7 @@ config MMC_S3C_DMA
option is useful.
config MMC_S3C_PIODMA
- bool "Support for both PIO and DMA (EXPERIMENTAL)"
+ bool "Support for both PIO and DMA"
help
Compile both the PIO and DMA transfer routines into the
driver and let the platform select at run-time which one
@@ -439,8 +435,8 @@ config MMC_S3C_PIODMA
endchoice
config MMC_SDRICOH_CS
- tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
- depends on EXPERIMENTAL && PCI && PCMCIA
+ tristate "MMC/SD driver for Ricoh Bay1Controllers"
+ depends on PCI && PCMCIA
help
Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
card whenever you insert a MMC or SD card into the card slot.
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
