This seems to be a return of the problem I was having a while ago
relating to the USB drivers. The Oops happens when I move the mouse
with the usb-uhci driver. The alternate driver (uhci) does not load
properly (message in syslog - uhci: host controller halted. very bad)
System:
K7 800
KA7-100 m/b (Via KX133 chipset)
Here is the decoded oops:
ksymoops 2.4.0 on i686 2.4.2. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.2/ (default)
-m /boot/System.map-2.4.2 (specified)
Unable to handle kernel NULL pointer dereference at virtual address 0000000c
d083932d
*pde = 00000000
Oops: 0000
CPU: 0
EIP: 0010:[<d083932d>]
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010246
eax: 00000000 ebx: 00e08269 ecx: 00888105 edx: 0000000c
esi: cfbb0c40 edi: 00000004 ebp: cfa3eb00 esp: c0271eec
ds: 0018 es: 0018 ss: 0018
Process swapper (pid: 0, stackpage=c0271000)
Stack: 00000000 cfa3eb24 cfa67180 cff06dc0 cfbb0c40 cff06ddc 00000000 d0839619
cff06dc0 cfbb0c40 00000001 00000000 00000000 cff06ddc cff06dc0 cff06ddc
00000000 d0839828 cff06dc0 cfbb0c48 00000000 c0110001 00000001 c010d2b2
Call Trace: [<d0839619>] [<d0839828>] [<c0110001>] [<c010d2b2>] [<c010a2f9>]
[<c010a468>] [<c0107240>]
[<c0109120>] [<c0107240>] [<c0107263>] [<c01072e2>] [<c0105000>] [<c0100191>]
Code: 8b 04 82 c1 e9 08 83 e1 0f d3 e8 83 e0 01 c1 e0 13 09 45 08
>>EIP; d083932d <[usb-uhci]process_interrupt+fd/1e0> <=====
Trace; d0839619 <[usb-uhci]process_urb+79/1f0>
Trace; d0839828 <[usb-uhci]uhci_interrupt+98/100>
Trace; c0110001 <init_table+1/80>
Trace; c010d2b2 <timer_interrupt+62/110>
Trace; c010a2f9 <handle_IRQ_event+39/60>
Trace; c010a468 <do_IRQ+68/b0>
Trace; c0107240 <default_idle+0/30>
Trace; c0109120 <ret_from_intr+0/20>
Trace; c0107240 <default_idle+0/30>
Trace; c0107263 <default_idle+23/30>
Trace; c01072e2 <cpu_idle+52/70>
Trace; c0105000 <empty_bad_page+0/1000>
Trace; c0100191 <L6+0/2>
Code; d083932d <[usb-uhci]process_interrupt+fd/1e0>
00000000 <_EIP>:
Code; d083932d <[usb-uhci]process_interrupt+fd/1e0> <=====
0: 8b 04 82 mov (%edx,%eax,4),%eax <=====
Code; d0839330 <[usb-uhci]process_interrupt+100/1e0>
3: c1 e9 08 shr $0x8,%ecx
Code; d0839333 <[usb-uhci]process_interrupt+103/1e0>
6: 83 e1 0f and $0xf,%ecx
Code; d0839336 <[usb-uhci]process_interrupt+106/1e0>
9: d3 e8 shr %cl,%eax
Code; d0839338 <[usb-uhci]process_interrupt+108/1e0>
b: 83 e0 01 and $0x1,%eax
Code; d083933b <[usb-uhci]process_interrupt+10b/1e0>
e: c1 e0 13 shl $0x13,%eax
Code; d083933e <[usb-uhci]process_interrupt+10e/1e0>
11: 09 45 08 or %eax,0x8(%ebp)
Kernel panic: Aiee, killing interrupt handler!
Here are the boot messages from a working boot:
Feb 28 12:06:56 bloch kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb4d0, last bus=1
Feb 28 12:06:56 bloch kernel: PCI: Using configuration type 1
Feb 28 12:06:56 bloch kernel: PCI: Probing PCI hardware
Feb 28 12:06:56 bloch kernel: Unknown bridge resource 0: assuming transparent
Feb 28 12:06:56 bloch kernel: PCI: Using IRQ router VIA [1106/0686] at 00:07.0
Feb 28 12:06:57 bloch kernel: ACPI: Core Subsystem version [20010208]
Feb 28 12:06:57 bloch kernel: ACPI: Subsystem enabled
Feb 28 12:06:57 bloch kernel: ACPI: System firmware supports: C2 C3
Feb 28 12:06:57 bloch kernel: ACPI: plvl2lat=90 plvl3lat=900
Feb 28 12:06:57 bloch kernel: ACPI: C2 enter=1288 C2 exit=322
Feb 28 12:06:57 bloch kernel: ACPI: C3 enter=38653 C3 exit=3221
Feb 28 12:06:57 bloch kernel: ACPI: Not using ACPI idle
Feb 28 12:06:57 bloch kernel: ACPI: System firmware supports: S0 S1 S3 S4 S5
Feb 28 12:06:57 bloch kernel: usb.c: registered new driver usbdevfs
Feb 28 12:06:57 bloch kernel: usb.c: registered new driver hub
Feb 28 12:06:57 bloch kernel: usb-uhci.c: $Revision: 1.251 $ time 02:58:59 Feb 22 2001
Feb 28 12:06:57 bloch kernel: usb-uhci.c: High bandwidth mode enabled
Feb 28 12:06:57 bloch kernel: PCI: Found IRQ 5 for device 00:07.2
Feb 28 12:06:57 bloch kernel: PCI: The same IRQ used for device 00:07.3
Feb 28 12:06:57 bloch kernel: PCI: The same IRQ used for device 00:08.0
Feb 28 12:06:57 bloch kernel: usb-uhci.c: USB UHCI at I/O 0xc400, IRQ 5
Feb 28 12:06:57 bloch kernel: usb-uhci.c: Detected 2 ports
Feb 28 12:06:57 bloch kernel: usb.c: new USB bus registered, assigned bus number 1
Feb 28 12:06:57 bloch kernel: Product: USB UHCI Root Hub
Feb 28 12:06:57 bloch kernel: SerialNumber: c400
Feb 28 12:06:57 bloch kernel: hub.c: USB hub found
Feb 28 12:06:57 bloch kernel: hub.c: 2 ports detected
Feb 28 12:06:57 bloch kernel: PCI: Found IRQ 5 for device 00:07.3
Feb 28 12:06:57 bloch kernel: PCI: The same IRQ used for device 00:07.2
Feb 28 12:06:57 bloch kernel: PCI: The same IRQ used for device 00:08.0
Feb 28 12:06:57 bloch kernel: usb-uhci.c: USB UHCI at I/O 0xc800, IRQ 5
Feb 28 12:06:57 bloch kernel: usb-uhci.c: Detected 2 ports
Feb 28 12:06:57 bloch kernel: hub.c: USB new device connect on bus1/1, assigned device
number 2
Feb 28 12:06:57 bloch kernel: usb.c: new USB bus registered, assigned bus number 2
Feb 28 12:06:57 bloch kernel: Product: USB UHCI Root Hub
Feb 28 12:06:57 bloch kernel: SerialNumber: c800
Feb 28 12:06:57 bloch kernel: hub.c: USB hub found
Feb 28 12:06:57 bloch kernel: hub.c: 2 ports detected
Feb 28 12:06:57 bloch kernel: Manufacturer: Logitech
Feb 28 12:06:57 bloch kernel: Product: USB-PS/2 Mouse M-BA47
Feb 28 12:06:57 bloch kernel: usb.c: USB device 2 (vend/prod 0x46d/0xc002) is not
claimed by any active driver.
Feb 28 12:06:57 bloch kernel: Length = 18
Feb 28 12:06:57 bloch kernel: DescriptorType = 01
Feb 28 12:06:57 bloch kernel: USB version = 1.00
Feb 28 12:06:57 bloch kernel: Vendor:Product = 046d:c002
Feb 28 12:06:57 bloch kernel: MaxPacketSize0 = 8
Feb 28 12:06:57 bloch kernel: NumConfigurations = 1
Feb 28 12:06:57 bloch kernel: Device version = 1.20
Feb 28 12:06:57 bloch kernel: Device Class:SubClass:Protocol = 00:00:00
Feb 28 12:06:57 bloch kernel: Per-interface classes
Feb 28 12:06:57 bloch kernel: Configuration:
Feb 28 12:06:57 bloch kernel: bLength = 9
Feb 28 12:06:57 bloch kernel: bDescriptorType = 02
Feb 28 12:06:57 bloch kernel: wTotalLength = 0022
Feb 28 12:06:57 bloch kernel: bNumInterfaces = 01
Feb 28 12:06:57 bloch kernel: bConfigurationValue = 01
Feb 28 12:06:57 bloch kernel: iConfiguration = 00
Feb 28 12:06:57 bloch kernel: bmAttributes = a0
Feb 28 12:06:57 bloch kernel: MaxPower = 50mA
Feb 28 12:06:57 bloch kernel:
Feb 28 12:06:57 bloch kernel: Interface: 0
Feb 28 12:06:57 bloch kernel: Alternate Setting: 0
Feb 28 12:06:57 bloch kernel: bLength = 9
Feb 28 12:06:57 bloch kernel: bDescriptorType = 04
Feb 28 12:06:57 bloch kernel: bInterfaceNumber = 00
Feb 28 12:06:57 bloch kernel: bAlternateSetting = 00
Feb 28 12:06:57 bloch kernel: bNumEndpoints = 01
Feb 28 12:06:57 bloch kernel: bInterface Class:SubClass:Protocol = 03:01:02
Feb 28 12:06:57 bloch kernel: iInterface = 00
Feb 28 12:06:57 bloch kernel: Endpoint:
Feb 28 12:06:57 bloch kernel: bLength = 7
Feb 28 12:06:57 bloch kernel: bDescriptorType = 05
Feb 28 12:06:57 bloch kernel: bEndpointAddress = 81 (in)
Feb 28 12:06:57 bloch kernel: bmAttributes = 03 (Interrupt)
Feb 28 12:06:57 bloch kernel: wMaxPacketSize = 0008
Feb 28 12:06:57 bloch kernel: bInterval = 0a
Feb 28 12:06:57 bloch kernel: usb.c: registered new driver hid
Feb 28 12:06:57 bloch kernel: input0: USB HID v1.00 Mouse [Logitech USB-PS/2 Mouse
M-BA47] on usb1:2.0
Feb 28 12:06:57 bloch kernel: mouse0: PS/2 mouse device for input0
Feb 28 12:06:57 bloch kernel: mice: PS/2 mouse device common for all mice
Feb 28 12:06:41 bloch rc.sysinit: Initializing USB controller (usb-uhci): succeeded
Feb 28 12:06:41 bloch rc.sysinit: Mounting USB filesystem: succeeded
Feb 28 12:06:41 bloch modprobe: Note: /etc/modules.conf is more recent than
/lib/modules/2.4.2/modules.dep
Feb 28 12:06:41 bloch rc.sysinit: Initializing USB HID interface: succeeded
Feb 28 12:06:41 bloch modprobe: Note: /etc/modules.conf is more recent than
/lib/modules/2.4.2/modules.dep
Feb 28 12:06:41 bloch rc.sysinit: Initializing USB mouse: succeeded
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
