This patch allows the STMPE keypad driver to be successfully probed
and initialised during a Device Tree enabled boot sequence. It
contains all of the required properties needed to setup and map
each key on the 6x3 keypad located on the ST User Interface Board.
Acked-by: Linus Walleij <linus.wall...@linaro.org>
Signed-off-by: Lee Jones <lee.jo...@linaro.org>
---
arch/arm/boot/dts/stuib.dtsi | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/stuib.dtsi
index b25663c..b492e3e 100644
--- a/arch/arm/boot/dts/stuib.dtsi
+++ b/arch/arm/boot/dts/stuib.dtsi
@@ -21,6 +21,33 @@
i2c-client-wake;
st,autosleep-timeout = <1024>;
+
+ stmpe_keypad {
+ compatible = "st,stmpe-keypad";
+
+ debounce-interval = <64>;
+ stericsson,scan-count = <8>;
+ stericsson,no-autorepeat;
+
+ linux,keymap = <0x205006b
+ 0x4010074
+ 0x3050072
+ 0x1030004
+ 0x502006a
+ 0x500000a
+ 0x5008b
+ 0x706001c
+ 0x405000b
+ 0x6070003
+ 0x3040067
+ 0x303006c
+ 0x60400e7
+ 0x602009e
+ 0x4020073
+ 0x5050002
+ 0x4030069
+ 0x3020008>;
+ };
};
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
