Note, I don't normally do stable releases in the middle of the -rc1
merge window, but by doing that, they get really big and delay getting
bugfixes to users who want/need them. So I've picked through the
patches submitted for the stable releases so far, and taken the "safer"
ones (i.e. mostly all small driver fixes). I still have a lot more
patches in the queue to be applied after this release, so if you don't
see a patch you have submitted in here, please wait for the next stable
release before worrying.
------
This is the start of the stable review cycle for the 3.6.1 release.
There are 56 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat Oct 6 21:11:02 UTC 2012.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.6.1-rc1.gz
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Bart Van Assche <[email protected]>
SCSI: scsi_dh_alua: Enable STPG for unavailable ports
Dan Williams <[email protected]>
SCSI: scsi_remove_target: fix softlockup regression on hot remove
Dan Williams <[email protected]>
isci: fix isci_pci_probe() generates warning on efi failure path
Mike Marciniszyn <[email protected]>
IB/qib: Fix local access validation for user MRs
Bart Van Assche <[email protected]>
IB/srp: Avoid having aborted requests hang
Bart Van Assche <[email protected]>
IB/srp: Fix use-after-free in srp_reset_req()
Patrick McHardy <[email protected]>
IPoIB: Fix use-after-free of multicast object
Dan Carpenter <[email protected]>
remoteproc: fix a potential NULL-dereference on cleanup
Ohad Ben-Cohen <[email protected]>
remoteproc: select VIRTIO to avoid build breakage
Seth Forshee <[email protected]>
Input: synaptics - adjust threshold for treating position values as negative
Wei Yongjun <[email protected]>
can: mscan-mpc5xxx: fix return value check in mpc512x_can_get_clock()
Stephen M. Cameron <[email protected]>
SCSI: hpsa: Use LUN reset instead of target reset
Benjamin Herrenschmidt <[email protected]>
SCSI: ibmvscsi: Fix host config length field overflow
Kees Cook <[email protected]>
Yama: handle 32-bit userspace prctl
Matthieu CASTET <[email protected]>
UBI: erase free PEB with bitflip in EC header
Artem Bityutskiy <[email protected]>
UBI: fix autoresize handling in R/O mode
Russ Gorby <[email protected]>
n_gsm: memory leak in uplink error path
Russ Gorby <[email protected]>
n_gsm: added interlocking for gsm_data_lock for certain code paths
Russ Gorby <[email protected]>
n_gsm: uplink SKBs accumulate on list
xiaojin <[email protected]>
n_gsm.c: Implement 3GPP27.010 DLC start-up procedure in MUX
Denys Vlasenko <[email protected]>
coredump: prevent double-free on an error path in core dumper
Konrad Rzeszutek Wilk <[email protected]>
xen/pciback: Restore the PCI config space after an FLR.
Sujith Manoharan <[email protected]>
ath9k: Disable ASPM only for AR9285
Kevin Daughtridge <[email protected]>
HID: keep dev_rdesc unmodified and use it for comparisons
Michael Spang <[email protected]>
Increase XHCI suspend timeout to 16ms
Elric Fu <[email protected]>
xHCI: handle command after aborting the command ring
Elric Fu <[email protected]>
xHCI: cancel command after command timeout
Elric Fu <[email protected]>
xHCI: add aborting command ring function
Elric Fu <[email protected]>
xHCI: add cmd_ring_state
Sarah Sharp <[email protected]>
xhci: Intel Panther Point BEI quirk.
Khalid Aziz <[email protected]>
firmware: Add missing attributes to EFI variable attribute print out from
sysfs
Larry Finger <[email protected]>
b43legacy: Fix crash on unload when firmware not available
Ben Hutchings <[email protected]>
tools/hv: Check for read/write errors
Ben Hutchings <[email protected]>
tools/hv: Fix exit() error code
Ben Hutchings <[email protected]>
tools/hv: Fix file handle leak
Flavio Leitner <[email protected]>
serial: set correct baud_base for EXSYS EX-41092 Dual 16950
Linus Walleij <[email protected]>
serial: pl011: handle corruption at high clock speeds
Vikram Pandita <[email protected]>
serial: omap: fix software flow control
Jiri Slaby <[email protected]>
TTY: ttyprintk, don't touch behind tty->write_buf
Stanislav Kozina <[email protected]>
Remove BUG_ON from n_tty_read()
Ian Abbott <[email protected]>
staging: comedi: fix memory leak for saved channel list
Ian Abbott <[email protected]>
staging: comedi: don't dereference user memory for INSN_INTTRIG
Ian Abbott <[email protected]>
staging: comedi: jr3_pci: fix iomem dereference
Ian Abbott <[email protected]>
staging: comedi: s626: don't dereference insn->data
Larry Finger <[email protected]>
staging: r8712u: Do not queue cloned skb
Christopher Brannon <[email protected]>
tty: keyboard.c: Remove locking from vt_get_leds.
Ben Hutchings <[email protected]>
staging: speakup_soft: Fix reading of init string
Greg Kroah-Hartman <[email protected]>
USB: serial: fix up bug with missing {}
Vivek Gautam <[email protected]>
usb: host: xhci: Fix Null pointer dereferencing with 71c731a for non-x86
systems
Bjørn Mork <[email protected]>
USB: qcaux: add Pantech vendor class match
Alan Stern <[email protected]>
USB: EHCI: convert warning messages to debug-level
Antonio Ospite <[email protected]>
USB: ftdi_sio: add TIAO USB Multi-Protocol Adapter (TUMPA) support
Bjørn Mork <[email protected]>
USB: option: blacklist QMI interface on ZTE MF683
Mike Thompson <[email protected]>
usb: otg: mxs-phy: Fix mx23 operation
Sebastian Andrzej Siewior <[email protected]>
usb: gadget: initialize the strings in tcm_usb_gadget properly
Sebastian Andrzej Siewior <[email protected]>
usb: gadget: make g_printer enumerate again
-------------
Diffstat:
Makefile | 4 +-
arch/arm/plat-omap/include/plat/omap-serial.h | 4 +-
drivers/char/ttyprintk.c | 2 +-
drivers/firmware/efivars.c | 17 +-
drivers/hid/hid-core.c | 16 +-
drivers/hid/usbhid/hid-core.c | 6 +-
drivers/infiniband/hw/qib/qib_keys.c | 5 +-
drivers/infiniband/ulp/ipoib/ipoib_main.c | 2 +-
drivers/infiniband/ulp/ipoib/ipoib_multicast.c | 19 +-
drivers/infiniband/ulp/srp/ib_srp.c | 3 +-
drivers/input/mouse/synaptics.c | 31 ++-
drivers/mtd/ubi/attach.c | 2 +-
drivers/mtd/ubi/build.c | 5 +
drivers/net/can/mscan/mpc5xxx_can.c | 4 +-
drivers/net/wireless/ath/ath9k/pci.c | 5 +-
drivers/net/wireless/b43legacy/main.c | 2 +
drivers/remoteproc/Kconfig | 1 +
drivers/remoteproc/remoteproc_core.c | 22 +-
drivers/scsi/device_handler/scsi_dh_alua.c | 3 +-
drivers/scsi/hpsa.c | 2 +-
drivers/scsi/ibmvscsi/ibmvscsi.c | 3 +
drivers/scsi/isci/init.c | 1 -
drivers/scsi/isci/probe_roms.c | 1 -
drivers/scsi/scsi_sysfs.c | 30 ++-
drivers/staging/comedi/comedi_fops.c | 5 +-
drivers/staging/comedi/drivers/jr3_pci.c | 2 +-
drivers/staging/comedi/drivers/s626.c | 2 +-
drivers/staging/rtl8712/rtl8712_recv.c | 5 +-
drivers/staging/speakup/speakup_soft.c | 13 +-
drivers/tty/n_gsm.c | 26 ++-
drivers/tty/n_tty.c | 3 +-
drivers/tty/serial/8250/8250_pci.c | 9 +-
drivers/tty/serial/amba-pl011.c | 15 +-
drivers/tty/serial/omap-serial.c | 12 +-
drivers/tty/vt/keyboard.c | 3 -
drivers/usb/gadget/printer.c | 128 ++++++------
drivers/usb/gadget/tcm_usb_gadget.c | 33 +--
drivers/usb/gadget/tcm_usb_gadget.h | 14 +-
drivers/usb/host/ehci-timer.c | 6 +-
drivers/usb/host/xhci-mem.c | 7 +
drivers/usb/host/xhci-pci.c | 1 +
drivers/usb/host/xhci-ring.c | 286 +++++++++++++++++++++++++-
drivers/usb/host/xhci.c | 38 +++-
drivers/usb/host/xhci.h | 20 ++
drivers/usb/otg/mxs-phy.c | 38 +++-
drivers/usb/serial/ftdi_sio.c | 2 +
drivers/usb/serial/ftdi_sio_ids.h | 5 +
drivers/usb/serial/option.c | 3 +-
drivers/usb/serial/qcaux.c | 10 +-
drivers/usb/serial/usb-serial.c | 3 +-
drivers/xen/xen-pciback/pci_stub.c | 1 +
fs/binfmt_elf.c | 19 +-
include/linux/pci_ids.h | 1 -
security/yama/yama_lsm.c | 2 +-
tools/hv/hv_kvp_daemon.c | 45 ++--
55 files changed, 697 insertions(+), 250 deletions(-)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
